Towards connected autonomous driving: review of use-cases

Connected autonomous vehicles are considered as mitigators of issues such as traffic congestion, road safety, inefficient fuel consumption and pollutant emissions that current road transportation system suffers from. Connected autonomous vehicles utilise communication systems to enhance the performance of autonomous vehicles and consequently improve transportation by enabling cooperative functionalities, namely, cooperative sensing and cooperative manoeuvring. The former refers to the ability to share and fuse information gathered from vehicle sensors and road infrastructures to create a better understanding of the surrounding environment while the latter enables groups of vehicles to drive in a co-ordinated way which ultimately results in a safer and more efficient driving environment. However, there is a gap in understanding how and to what extent connectivity can contribute to improving the efficiency, safety and performance of autonomous vehicles. Therefore, the aim of this paper is to investigate the potential benefits that can be achieved from connected autonomous vehicles through analysing five use-cases: (i) vehicle platooning, (ii) lane changing, (iii) intersection management, (iv) energy management and (v) road friction estimation. The current paper highlights that although connectivity can enhance the performance of autonomous vehicles and contribute to the improvement of current transportation system performance, the level of achievable benefits depends on factors such as the penetration rate of connected vehicles, traffic scenarios and the way of augmenting off-board information into vehicle control systems.     

Economic conditions for minibus usage in a multimodal feeder network

The introduction of minibuses into the transit fleets of some cities makes it more important than ever to investigate the economic and operating conditions of these vehicles for various transit and paratransit services. A high performance transit system is of great interest, owing to its desirable characteristics. However, it is not feasible to establish and use such a system all over a city. It is therefore necessary to support a high performance transit system with other modes to extend its area of operation (owing to higher demand) and also to connect those areas that are not covered by the high performance system to it. This paper considers the use of minibuses in the design of metro line feeders and to characterize the economic domain in which it is efficient to use them in a feeder network. Based on results from ant colony optimization, the performance measures of minibuses are compared with those of conventional buses to help make decision makers aware of the use and role of these vehicles. The study contradicts the common belief that, since minibuses require similar driver costs to those of conventional buses, it is not economical to use them in a transit fleet; in fact, it is shown that minibuses can displace conventional buses in some situations in a feeder network.     

Innovative detector layout for automated traffic turning volume counting

Because of many advantages, loop detectors are the most common practice for obtaining data to control intersections. However, they have some drawbacks, including the fact that multiple detectors are usually required to monitor a location. The current practice in many cities is to install four consecutive loop detectors per lane, or two at the stop bar and one as an advanced detector. In some cities, there are also departure detectors. All these configurations have some practical problems and do not produce accurate counts especially in shared lanes. In this paper, a new placement configuration for departure detectors is proposed and named the mid‐intersection detector (MID). In this configuration, departure detectors are moved back to the middle of the intersection in such a way that they can be activated by more than one movement at different times. In some cases, departure detectors lack equations for calculating turning movements, a problem solved by MIDs because each movement passes more detectors along its path (without increasing the number of loops), and therefore they can produce more accurate and reliable data for obtaining turning movement counts. Copyright © 2017 John Wiley & Sons, Ltd.     

关于桥面防水和沥青面层的设计与规范

该文简述了桥面防水层对桥梁结构的重要作用,阐述了设计桥面铺装时应考虑的面层厚度、压实及水的影响等因素,并介绍了防水膜沥青体系及液态聚合物体系。     

Analogy of fixed route shared taxi (taxi khattee) and bus services under various demand density and economical conditions

Taxi khattee is a fixed route unregulated shared taxi. It is a very common mode of transportation in Iran. Fixed route, unscheduled operation, open, unlimited pick‐up and drop‐off locations, and share ride are common features of taxi khattees. Low passenger capacity and working in high demand corridors provides for the possibility of high service frequencies any time of the day. Taxi khattees are similar to jitneys, which are obsolete or illegal in many countries. The aim of this research is to design transit network of an area using taxi khattees in addition to buses. The methodology employed in this paper simultaneously considers the costs to the users and operators on the one hand, and those of the public non‐users on the other hand. Taxi khattees are used in the design of a multimodal network along with buses to characterize the appropriate economic domain for their use. Moreover, their operation indices are compared against those of buses. A sensitivity analysis is carried out on various performance measures. Results show taxi khattees should be used in areas where population density is low, work force is inexpensive, social costs are not considered in fare calculation, and users' value of time is high. The study contradicts the common belief that since taxi khattees provide a high frequency compared to buses, they are economically plausible to use in a transit fleet. Copyright © 2011 John Wiley & Sons, Ltd.     

Increasing the accuracy of loop detector counts using adaptive neural fuzzy inference system and genetic programming

Loop detectors are devices that are most commonly used for obtaining data at intersections. Multiple detectors are usually required to monitor a location, and this reduces the accuracy of detectors for collecting traffic volumes. The purpose of this paper is to increase the accuracy of loop detector counts using Adaptive Neural Fuzzy Inference System (ANFIS) and Genetic Programming (GP) based on detector volume and occupancy. These methods do not need microscopic analysis and are easy to employ. Four approaches for one intersection are used in a case study. Results show that the models can improve intersection detector counts significantly. Results also show that ANFIS produces more accurate counts compared to regression and GP.     

A quantum evolutionary algorithm for the second-best congestion pricing problem in urban traffic networks

This paper investigates the congestion pricing problem in urban traffic networks. A first-best strategy, a second-best strategy for toll leveling in closed cordons and a second-best strategy for determining both toll levels and toll points are considered. The problem is known to be a mixed integer programming model and formulated as a bi-level optimization problem, with an objective of maximizing the social welfare. A method is presented to solve the problem, based on a novel metaheuristic algorithm, namely quantum evolutionary algorithm (QEA). To verify the proposed method, the widely used genetic algorithm (GA) is also applied to solve the problem. The problem is solved for a medium-size urban traffic network and the results of the QEA are compared against the conventional GA. Computational results show that the QEA outperforms the GA in solution quality.     

Using stop bar detector information to determine turning movement proportions in shared lanes

Turning vehicle volumes at signalized intersections are critical inputs for various transportation studies such as level of service, signal timing, and traffic safety analysis. There are various types of detectors installed at signalized intersections for control and operation. These detectors have the potential of producing volume estimates. However, it is quite a challenge to use such detectors for conducting turning movement counts in shared lanes. The purpose of this paper was to provide three methods to estimate turning movement proportions in shared lanes. These methods are characterized as flow characteristics (FC), volume and queue (VQ) length, and network equilibrium (NE). FC and VQ methods are based on the geometry of an intersection and behavior of drivers. The NE method does not depend on these factors and is purely based on detector counts from the study intersection and the downstream intersection. These methods were tested using regression and genetic programming (GP). It was found that the hourly average error ranged between 4 and 27% using linear regression and 1 to 15% using GP. A general conclusion was that the proposed methods have the potential of being applied to locations where appropriate detectors are installed for obtaining the required data. Copyright © 2016 John Wiley & Sons, Ltd.