不同外加剂对OGFC混合料路用性能的影响

OGFC为开级配沥青混合料,主要由粗集料嵌挤组成,在世界各地越来越广泛地用于铺筑路面.OGFC混合料可以增大路表面渗透性,减少噪音,增强表面摩擦力,尤其是在潮湿条件下.该文主要研究不同外加剂对OGFC路用性能的影响,其混合料分别由再生聚乙烯改性沥青(RPEB)、橡胶粉改性沥青(CRMB)和70#基质沥青+纤维与矿料拌和而成.并分别采用析漏试验、肯塔堡飞散试验、渗水试验、劈裂试验、静态模量试验,车辙试验和抗滑试验评估OGFC混合料的路用性能.结果表明:纤维和聚合物可以有效地减小OGFC离析的可能性,混合料每面击实50次能相应地提高磨耗性和其他相关的性能.改性沥青混合料的抗拉强度比(TSR)低于纤维+基质沥青混合料的抗拉强度比.     

Variation in the value of travel time savings and its impact on the benefits of managed lanes

This paper examines the variation in the value of travel time savings (VTTS) for travelers with a managed lane (ML) option when taking an ordinary trip versus a trip that is unusual in some way. VTTS estimates vary substantially depending on the urgency of the trip made. At the low end, the mean VTTS for a traveler who wants to make extra stops and still arrive on time is approximately 10% higher than that for an ordinary trip. At the high end, a traveler running late for an appointment shows a mean VTTS that is approximately 300% higher than that for an ordinary trip. These estimates vary widely over the population of travelers. In light of these variations, the value of an uncongested travel alternative (such as MLs) is examined and found to be greatly undervalued if using typical VTTS estimates.     

Development of a probabilistic model to optimize disseminated real‐time bus arrival information for pre‐trip passengers

In the advent of Advanced Traveler Information Systems (ATIS), the total wait time of passengers for buses may be reduced by disseminating real‐time bus arrival times for the next or series of buses to pre‐trip passengers through various media (e.g., internet, mobile phones, and personal digital assistants). A probabilistic model is desirable and developed in this study, while realistic distributions of bus and passenger arrivals are considered. The disseminated bus arrival time is optimized by minimizing the total wait time incurred by pre‐trip passengers, and its impact to the total wait time under both late and early bus arrival conditions is studied. Relations between the optimal disseminated bus arrival time and major model parameters, such as the mean and standard deviation of arrival times for buses and pre‐trip passengers, are investigated. Analytical results are presented based on Normal and Lognormal distributions of bus arrivals and Gumbel distribution of pre‐trip passenger arrivals at a designated stop. The developed methodology can be practically applied to any arrival distributions of buses and passengers.     

Surface prediction and control algorithms for anti-lock brake system

Anti-lock brake system (ABS) has been designed to achieve maximum deceleration by preventing the wheels from locking. The friction coefficient between tyre and road is a nonlinear function of slip ratio and varies for different road surfaces. In this paper, methods have been developed to predict these different surfaces and accordingly control the wheel slip to achieve maximum friction coefficient for different road surfaces. The surface prediction and control methods are based on a half car model to simulate high speed braking performance. The prediction methods have been compared with the results available in the literature. The results show the advantage of ABS with surface prediction as compared to ABS without proper surface identification. Finally, the performance of the controller developed in this paper has been compared with four different ABS control algorithms reported in the literature. The accuracy of prediction by the proposed methods is very high with error in prediction in a range of 0.17-2.4%. The stopping distance is reduced by more than 3% as a result of prediction for all surfaces.