A random heaping model of annual vehicle kilometres travelled considering heterogeneous approximation in reporting

Transportation - Annual vehicle kilometres travelled (VKT) is a long used index of car use. Usually, the annual VKT, as reported by respondents, is used for the analysis. But the reported values...     

Direct yaw moment control and power consumption of in-wheel motor vehicle in steady-state turning

Driving force distribution control is one of the characteristic performance aspects of in-wheel motor vehicles and various methods have been developed to control direct yaw moment while turning. However, while these controls significantly enhance vehicle dynamic performance, the additional power required to control vehicle motion still remains to be clarified. This paper constructed new formulae of the mechanism by which direct yaw moment alters the cornering resistance and mechanical power of all wheels based on a simple bicycle model, including the electric loss of the motors and the inverters. These formulation results were validated by an actual test vehicle equipped with in-wheel motors in steady-state turning. The validated theory was also applied to a comparison of several different driving force distribution mechanisms from the standpoint of innate mechanical power.     

Comparative analysis of household car,motorcycle and bicycle ownership between Osaka metropolitan area,Japan and Kuala Lumpur,Malaysia

The interactions among different types of vehicle ownership including car, motorcycle and bicycle are examined by developing simultaneous vehicle ownership models in this study. Large scale person trip survey data for Osaka metropolitan area, Japan and Kuala Lumpur, Malaysia are used for empirical analysis. The results suggest that population density at residential area significantly and negatively affects car ownership for both areas, and that the effects are larger for Osaka metropolitan area than for Kuala Lumpur. Also, bicycle ownership becomes higher at higher population density area for Osaka area, while higher at lower population density area for Kuala Lumpur, which represents the different usage patterns of bicycle between the two areas.

Spatial econometric analysis of automobile and motorcycle traffic on Indonesian national roads and its socio-economic determinants: Is it local or beyond city boundaries?

The purpose of this paper is to verify the justification provided for a centralized national road policyin Indonesia, namely, that trips on national roads are typically inter-urban, by measuring the spatialdimensions of automobile and motorcycle trips on national roads in Indonesia. The study finds thatmotorcycle trips are characteristically local; by contrast, automobile trips extend beyond city boundaries,although to a limited extent. The results suggest the decentralization of transportation policies for thedevelopment and maintenance of national roads by granting autonomy to local governments when nofiscal externality exists. The results also indicate that road capacity, gasoline prices, income, populationand worker density, city size, and the number of public buses are strong predictors of vehicle kilometerstraveled.     

Effect of pitting corrosion on local strength of hold frames of bulk carriers (2nd Report)—Lateral-distortional buckling and local face buckling

Pitting corrosion is typical corrosion observed on coated hold frames of bulk carriers which exclusively carry coal and iron ore. In order to secure the safety of these types of bulk carriers, it is important to understand the effect of pitting corrosion on local strength of hold frames.

In order to investigate this effect, a series of 4- and 3-point bend tests on structural models which consist of web, shell and face plates has been carried out. Artificial pitting was created on the web plate to simulate pitting. In the 4-point bend tests, two equal concentrated loads have been applied vertically at the one-third points of simply supported models so that compression load due to bending would act on the face plate. In this testing condition, lateral-distortional buckling occurred before reaching the ultimate strength and local buckling of the face plate was observed after reaching the ultimate strength. The effect of web plate pitting on the lateral-distortional buckling strength was found to be small but the ultimate strength decreases with increase in the degree of pitting intensity. In the 3-point bend tests, concentrated load has been applied vertically at the center of simply supported models so that compression load due to bending would act on the face plate. In this testing condition, local face buckling occurred just after reaching the ultimate strength. The ultimate strength is found to be decreasing with increase in the degree of pitting intensity.

A series of non-linear FE analyses has been performed to simulate the deformation behavior observed in the tests. It has been revealed that even in the case of randomly distributed pitting corrosion the ultimate strength of the structural models was almost the same as that of the structural models with uniform corrosion corresponding to the average thickness loss.     

Development of a hull form definition tool with a related knowledge-based advisory system

The development of a parametric hull form design system utilizing combined knowledge-based and objectoriented methodologies, approaches, and techniques is the major purpose of this research. One objective was the development of a powerful, intuitive, and parameter-based hull definition system with a related hull definition advisory system that would provide useful and necessary advice to the user. Object and knowledge modeling activities were conducted during the analysis and design stage to facilitate the implementation of a hull design program and advisory system. The hull design system includes the generation of a geometric model from a process of aggregating simple user-selected shapes representing different boundaries. Design involves the capability to vary simple parameters such as entrance angles, length-breadth ratios, and radii to define local and general surface geometries. Hydrostatic calculations are included for analysis; results are referred to an advisory system for evaluation and the determination of the acceptability of parameters and analysis results. The advisory system includes a knowledge bases consisting of hull form databases, results of the statistical analysis of data, design parameter constraints, and expert knowledge acquired from designers, reference materials, and technical reports. Use of the design tool with the advisory system results in the rapid generation of hull forms and associated design evaluations. Flexibility in decision making results from the separation of the design system from the advisory system. The independence of the two systems allows for a wide range of user experience with experts using the design tool with minimal reference to the advisory system. On the other hand, the expertise and knowledge stored in the advisory system is fully available to inexperienced designers and users.     

An analysis of time allocation to in-home and out-of-home discretionary activities across working days and non- working days

The behavior of time allocation to two types of discretionary activities is formulated as a doubly-censored Tobit model. The model is capable of incorporating cases where the entire amount of time available for discretionary activity is allocated to one type of activity and the other type of activity is not engaged at all. The model is applied to examine individuals' allocation of time to in-home and out-of-home discretionary activities on working days and non-working days, using a weekly time-use data set from the Netherlands. Workers' daily activity patterns vary significantly between working days and non-working days, while it can be expected that patterns of time allocation are correlated between working days and non-working days. A set of error components is introduced into the model to represent this correlation, adopting a mass point approach which requires no assumption about the distribution of the error components. The validity of the model is examined statistically.     

Productive efficiency of public and private solid waste logistics and its implications for waste management policy

This paper measures the productive efficiency of municipal solid waste (MSW) logistics by applying data envelopment analysis (DEA) to cross-sectional data of prefectures in Japan. Either through public operations or by outsourcing to private waste collection operators, prefectural governments possess the fundamental authority over waste processing operations in Japan. Therefore, we estimate a multi-input multi-output production efficiency at the prefectural level via DEA, employing several different model settings. Our data classify the MSW into household solid waste (HSW) and business solid waste (BSW) collected by both private and public operators as separate outputs, while the numbers of trucks and workers used by private and public operators are used as inputs. The results consistently show that geographical characteristics, such as the number of inhabited remote islands, are relatively more dominant factors for determining inefficiency. While the implication that a minimum efficient scale is not achieved in these small islands is in line with the literature suggesting that waste logistics has increasing returns at the municipal level, our results indicate that waste collection efficiency in Japan is well described by CRS technology at the prefectural level. The results also show that prefectures with higher private-sector participation, measured in terms of HSW collection, are more efficient, whereas a higher private–labor ratio negatively affects efficiency. We also provide evidence that prefectures with inefficient MSW logistics have a higher tendency of suffering from the illegal dumping of industrial waste.     

Effect of pitting corrosion on the ultimate strength of steel plates subjected to in-plane compression and bending

Corrosion pits with a circular cone shape are typically observed on coated hold frames of aged bulk carriers which carry exclusively coal and iron ore. In order to ensure the safety of these types of bulk carrier, it is necessary to understand the effect of pitting corrosion on the local strength of hold frames. In order to investigate this effect, a series of nonlinear finite-element (FE) analyses has been performed with pitted plates subjected to in-plane compressive loads and bending moments. It has been shown that the ultimate compression load or bending moment of pitted plates is smaller than that of uniformly corroded plates in terms of average thickness loss, and that predictions of the ultimate strength using the average thickness loss at the minimum cross section would be conservative. In order to establish a method of evaluating strength reduction due to pitting corrosion, it is important to identify the failure mode that would be most detrimentally affected by pitting corrosion. It was found that the reduction of the ultimate compressive load or bending moment due to pitting corrosion is smaller than that of the tensile strength in terms of equivalent thickness.