High-strain-rate fracture of adhesively bonded composite joints in DCB and TDCB specimens

Double-cantilever beam (DCB) and tapered double-cantilever beam (TDCB) specimens are the test configurations most commonly used to measure the fracture toughness of composites and adhesive joints. Strain rates of 1 to 18.47 m/s were applied to the test specimens via high-speed hydraulic test equipment. Because the fracture occurs through the adhesively bonded joints and the cracks grow rapidly, the crack length and beam displacement were recorded by a high-speed camera. An energy range from 0 to 10 J was often observed in the high-strain-rate fracture experiments for nonlinear plastic behavior of the dynamically loaded adhesively bonded DCB and TDCB specimens. The range of energy release rates (fracture energy) for TDCB specimen was 2 to 3 times higher than that of a DCB specimen for all high strain rates. The fracture energy of automotive adhesive joints can be estimated using the experimental results in this study for the fracture toughness (G_IC) under high rates of loading. The crack grows as the applied fracture energy exceeds the value of the critical energy release rate (G_IC) at the crack tip. The energy release rate was calculated using the fracture mechanics formula. The key fracture mechanics parameter, the fracture energy GIC, was ascertained as a function of the test rate and can be used to assess and model the overall joint performance.     

Climate Change and Tourist Comfort on Europe's Beaches in Summer: A Reassessment

Major impacts of climate change have been projected for tourism in Europe. Typically, these projections took general tourism activities such as sight-seeing and their climate requirements as their point of reference. The purpose of this study is to reassess the impact of climate change, by looking specifically at beach tourism in summer, a crucial market segment in Europe and more specifically in the Mediterranean. As beach tourism requires relatively high temperatures, relatively modest shifts in attractiveness are found. With respect to climate, the Mediterranean is likely to remain Europe's prime region for summer-time beach tourism for at least the next 50 years. Coastal managers in Mediterranean destinations are advised to focus some of their attention on other climate change impacts such as sea-level rise or water availability, and include environmental quality and diversification of activities in their deliberations. In non-Mediterranean regions, a promising strategy may be to focus on short- and medium-distance visitors who can take advantage of the new opportunities for beach tourism, and to explore the merits of seasonal climate forecasting.     

Introducing shared life experience metric in urban planning

Transportation - Historically cities are formed to provide interaction and communication opportunities for communities. As cities become smarter, new forms of interactions are formed and the...     

The biogeochemical cycling of methane in Ria de Vigo, NW Spain: Sediment processing and sea–air exchange

Methane (CH₄) concentrations were measured in the water column, in sediment porewaters, and in atmospheric air, in the Ría de Vigo, NW Spain, during both the onset (April 2003) and at the end of (September 2004) seasonal upwelling. In addition, CH₄ concentration and stable isotopic signatures (δ¹³CH₄) were measured in porewaters, and sediment methanogenesis and aerobic oxidation of CH₄ were determined in sediment incubations. Surface water column CH₄ (2 m depth) was in the range 3–180 nmol l^− 1 (110–8500% saturation) and followed a generally landward increase but with localised maxima in both the inner and middle Ría. These maxima were consistent with CH₄ inputs from underlying porewaters in which CH₄ concentrations were up to 3 orders of magnitude higher (maximum 350 μmol l^− 1). Surface water CH₄ concentrations were approximately three times higher in September than in April, consistent with a significant benthic CH₄ flux driven by enhanced sediment methanogenesis following the summer productivity maximum. CH₄ and δ¹³CH₄ in sediment porewaters and in incubated sediment slurries (20 °C) revealed significant sediment CH₄ oxidation, with an apparent isotopic fractionation factor (r_c) of  1.004. Using turbulent diffusion models of air–sea exchange we estimate an annual emission of atmospheric CH₄ from the Ría de Vigo of 18–44 × 10⁶ g (1.1–2.7 × 10⁶ mol). This estimate is approximately 1–2 orders of magnitude lower than a previous estimate based on a bubble transport model.     

Increase of metro line capacity by optimisation of track circuit length and location: In a distance to go system

The signalling system affects the type of service that can be provided on any particular railway line. The aims set when it comes to designing these systems to operate a railway line are: to ensure safety of operation and to ensure flexible and efficient running. When building a line capacity optimisation algorithm, it must reach a compromise solution between two parameters: minimise the interval between trains and keep journey time as low as possible. This paper aims to describe the algorithm developed between METRO DE MADRID and CITEF (Railway Technology Research Centre of the Universidad Politécnica de Madrid – UPM) that allows the capacity of an underground line equipped with ATP Distance To Go systems to be studied and optimised. This algorithm facilitates the tasks of signalling design and optimisation. Copyright © 2010 John Wiley & Sons, Ltd.     

Origins,Management, and Measurement of Stress on the Coast of Southern Spain

A series of boater compliance studies was performed between 1995 and 1998 in order to assess the effectiveness of existing speed zones designed to protect manatees in two Florida counties (Sarasota County and Lee County). Surveys involved teams of boat- or land-based observers positioned along speed-restricted waterways. Vessel characteristics were recorded along with observed speed. Multiple survey sites were sampled within each county. A total of 26,000 vessels was observed and evaluated. Overall boater compliance was 63% in Sarasota County and 58% in Lee County. Compliance varied significantly with vessel type and size. Differences in compliance among survey sites were also significant and were related to travel patterns, traffic volume, vessel composition, sign placement, level of speed restriction, and law enforcement presence. From a management perspective, it is recommended that speed zones for the protection of manatees be evaluated on a site-by-site basis to identify specific areas of concern.     

Automotive steering system preferences evaluated using a driving simulator

The automotive steering system is the primary channel through which road and vehicle behavior feedback is transmitted to the driver. While the driver provides directional platform control through the steering wheel, perceptions of the vehicle’s handling responsiveness are simultaneously transmitted back to the driver allowing for correction of any instabilities the vehicle may encounter. Based on these factors, drivers often pay special attention to the steering system when deciding what vehicle to purchase. Therefore, a significant amount of effort and time is invested in attempting to determine the optimal design of steering system components and configurations. In this study, the determination of an optimal steering configuration was attempted based on responses obtained from questionnaires that subjects answered. The questions were designed to evaluate the degree of satisfaction regarding the “control”, “ease of operation”, and “fun” participants experienced after each driving run. During the study, human subjects drove a driving simulator for 15 combinations of 3 different roadway environments and 5 different steering configurations, filling out a questionnaire after each scenario. The subjects were also classified as a type of driver (“utility”, “enthusiast”, and/or “performance”). The study attempted to determine if the mean values of questionnaire responses for “control”, “ease”, and “fun” type of questions changed as the scenario and/or driver type changed. Analysis of Variance (ANOVA) was used to determine if the mean values of the three types of questions were statistically different. The overall results suggest that the average responses for vehicle “control”, “ease”, and the “fun” type of questions were dependent on the type of roadway environment; however, only the responses for “fun” type of questions were influenced by the given steering configurations. Indeed, the steering system can impact the driver’s perceptions of the vehicle’s operational experience.     

Uncertainty quantification of Delft catamaran resistance,sinkage and trim for variable Froude number and geometry using metamodels,quadrature and Karhunen–Loève expansion

A framework for assessing convergence and validation of non-intrusive uncertainty quantification (UQ) methods is studied and applied to a complex industrial problem in ship design, namely the high-speed Delft Catamaran advancing in calm water, with variable Froude number and geometry. Relationship between UQ studies and deterministic verification and validation is discussed. Computations are performed using high- (URANS) and low- (potential flow) fidelity simulations. Froude number has expected value and standard deviation equal to 0.5 and 0.05, respectively, on a truncated normal distribution. Geometric uncertainty is related to the research space of a simulation-based design optimization, and assessed through the Karhunen–Loève expansion (KLE). Monte Carlo method with Latin hypercube sampling (MC-LHS) is used to compute expected value, standard deviation, distribution and uncertainty intervals for resistance, sinkage and trim. MC-LHS with CFD is used as a benchmark for validating less costly UQ methods, including MC-LHS with metamodels and standard quadrature formulas. Gaussian quadrature is found the most efficient method; however, MC-LHS with metamodels is preferred since provides with confidence intervals and distributions in a straightforward way and at reasonably small computational cost. UQ results are compared to earlier deterministic single- and multi-objective optimization; reduced-dimensional KLE studies for geometric variability indicate that stochastic optimization would not be of great benefit for the present problem.