Service design for public transportation to address the issue of females’ fear of crime

Transportation - In conjunction with their gender, how does the current design of public transport services affect female passengers’ feelings of safety and fear when using the service? This...     

IGCT及其门极驱动电路研究

IGCT作为一种新型大功率半导体开关器件,吸取了GTO和IGBT的优点,但其驱动则需要借助配套的门极驱动电路板才能实现.介绍了IGCT的基本工作原理,并根据驱动电路的要求分析设计原理,对1 100 A/4 500V逆导IGCT集成门极驱动电路的设计方法进行了具体分析和研究,实验结果验证了设计方法的可行性和正确性.     

安中机械(深圳)物流设备制造公司前行在汽车尾板制造业道路上

在国内尾板制造行业中,安中机械(深圳)物流设备制造公司(以下简称安中机械)称得上是元老级的企业。这个建于1965年的老厂,在2003年进行改制,可渭是“老树换新颜”,这棵经历改制之后的“老树”将如何发展?安中机械(深圳)公司总经理雷养民为记者讲述了该公司的发展足迹。     

浅谈集装箱货物发生残损、短缺的类型与责任归属

集装箱在运输装卸过程中货物时有残损、短缺发生。为了便于现场检验鉴定人员、理货人员、保险理赔人员以及收发货人判明货物的残损、短缺的类型,区分其原因,明确责任归属;同时也便于收发货人或代理人找到责任方,提出索赔、挽回损失,现就集装箱货物的残损、短缺的判别方法、类型、责任归属及其检验鉴定证书的作用作一探讨。     

A traffic flow simulator for short‐term travel time forecasting

This paper presents an off‐line forecasting system for short‐term travel time forecasting. These forecasts are based on the historical traffic count data provided by detectors installed on Annual Traffic Census (ATC) stations in Hong Kong. A traffic flow simulator (TFS) is developed for short‐term travel time forecasting (in terms of offline forecasting), in which the variation of perceived travel time error and the fluctuations of origin‐destination (O‐D) demand are considered explicitly. On the basis of prior O‐D demand and partial updated detector data, the TFS can estimate the link travel times and flows for the whole network together with their variances and covariances. The short‐term travel time forecasting by O‐D pair can also be assessed and the O‐D matrix can be updated simultaneously. The application of the proposed off‐line forecasting system is illustrated by a numerical example in Hong Kong.     

On the Design and Development of a Magneto-Rheological Mount

This paper evaluates the performance of a Magneto-Rheological (MR) mount. The mount incorporates MR fluid in a conventional fluid mount to open and close an inertia track between the fluid chambers of the mount. It is shown that such switching of the inertia track improves the mount's isolation effect by eliminating the large transmissibility peak that commonly exists at frequencies larger than the notch frequency for conventional fluid mounts. The switching frequencies of the MR mount are evaluated based on the parameters of the mount. A simple control scheme for switching the mount between the open and closed states is proposed, and the performance of the controlled mount is compared with conventional mounts. A sensitivity analysis is conducted to evaluate the effect of parameter errors in estimating the switching frequencies and mount performance. The results show that the switching frequencies can be accurately determined from mount parameters that are easily measured or estimated.     

The role of perceived environment,neighbourhood characteristics,and attitudes in walking behaviour: evidence from a rapidly developing city in China

Transportation - The associations between objective and subjective dimensions of the built environment and walking behaviour have been examined extensively in existing studies. However, the...     

Study on shaft alignment of propulsion shafting system depending on single reaction force supporting position of aft stern tube bearing

Journal of Marine Science and Technology - Trends of large-scale ships have seen propulsion shaft and propeller sizes increase. This has enabled shafts to have greater stiffness, yet has caused...     

Development of knowledge based body structure concept design model

The purpose of this study is to propose a concept design process for an automotive body structure using technical information on the major joints and members of vehicles. First, in order to collect the technical information on major joints and members, 17 vehicles were selected using benchmark data. The collected technical information for the selected vehicles was the cross sectional shapes of each joint and member which were used for the analysis of joint stiffness, crashworthiness and static stiffness of the member to make a database along with cross section properties. This study applied a ‘What If Study’ technique to perform a concept design of an automotive body using the analyzed information and selected cross section meeting the design objectives. The criteria for the selection of the cross section were defined by subdividing the defined design objectives of an automotive body structure and constraints into members and joints. In order to configure an analysis model of an automotive body structure using the selected cross section, a shape parametric model was used and static stiffness, dynamic stiffness and crashworthiness were assessed to evaluate the configured automotive body structure. The evaluation result showed that the crashworthiness and static/dynamic stiffness were improved compared to an existing body structure. In addition, the weight of the body structure was reduced. Through this study, the process that can rapidly and effectively derive and evaluate the concept design of an automotive body structure was defined. It is expected that, henceforth, this process will be helpful for the study of automotive body structures.