A study on collision buffer characteristic of sharp entrance angle bow structure

SEA-Arrow (sharp entrance angle bow like an arrow) has no protrusion of the bulbous bow to reduce bow waves and has a transverse stiffening system in the narrow bow space to apply the buffer bow concept. This system has lower longitudinal stiffness than a conventional longitudinal stiffening system and therefore has buffer characteristic in ship-to-ship collision. A comparative collision study of SEA-Arrow and the conventional bulbous bow was conducted using elasto-plastic finite element analysis. A collision scenario where the striking ship hits the side shell of tanker midship perpendicularly was selected. The results showed that the buffer bow characteristic of SEA-Arrow is superior to that of the conventional bulbous bow, since much more energy is dissipated by the plastic deformation of striking and struck ships until the inner shell of struck ship ruptures.     

Policy Simulation for New BRT and Area Pricing Alternatives Using an Opinion Survey in Jakarta

Abstract

An area pricing scheme for Jakarta, Indonesia, is currently under review as a transportation control measure along with the operation of new bus rapid transit (BRT) system. While this scheme may be effective for congestion reduction in the central business district (CBD), provision of alternative means of transportation for auto users that are ‘pushed-out’ is of great importance to obtain public acceptance. Hence, it is necessary to simulate simultaneously the area pricing scheme and the BRT development which may serve as an alternative for assumed ‘pushed-out’ auto users. Utilizing data from an opinion survey, this paper studies how BRT and auto ridership are likely to vary as a function of traveler and system attributes. Additionally, the study attempts to evaluate the way this new travel mode is distinguished from other existing conventional transportation alternatives in Jakarta. The survey data contains socioeconomic information of over 1000 respondents as well as details of to-work/school trips to the CBD including mode, travel cost, time, etc. Respondents were asked about their willingness to shift from their current mode to BRT to make the same travel for different BRT fare levels. Modeling efforts suggest that a mixed logit model performs better in explaining choice behavior. Therefore, this model was used for policy simulation. The simulation results brought about many implications as to the tested policies. While the developed models may be applied only to future BRT corridors in which the survey was conducted, they capture the key variables that are significant in explaining mode choice behavior and present great potential for practical use in policy simulation and analysis in a large metropolitan area of the developing world.     

Traffic problems in Southeast Asia featuring the case of Cambodia's traffic accidents involving motorcycles

This article provides the background to the special issue by reviewing the status of traffic problems in South East Asian countries, and in particular, the case of Cambodia. The “Make Roads Safe” report by the Commission for Global Road Safety (2011) confirms traffic accidents as the primary cause of youth mortality worldwide. Thus, the United Nations declared the decade from 2011 to 2020 as the “UN Decade of Action for Road Safety 2011-2020”, promoting road safety and to reduce the number of deaths in road accidents by 2020. Furthermore, the “Sustainable Development Goals” adopted in 2015 highlight the important role of sustainable transport in tackling the exclusion of vulnerable groups. On the other hand, the World Health Organization in 2015 indicate an increase in the death rate due to traffic accidents in low-income countries since 2000. Traffic accidents were already recognized as a social problem before the 2000s in countries such as Thailand and the Philippines. At the same time, other ASEAN member states such as Vietnam and Cambodia which have experienced rapid economic growth since the 2000s are now experiencing the seriousness of traffic problems. It is said that 70% of road accidents in Thailand, Cambodia and Laos involve motorcycles and three-wheelers, but despite this situation, the regulatory framework for motorcycles remains undeveloped. In the case of Cambodia, speeding by young people remains the major cause of road deaths and this can be explained by the fact that people can now travel at a higher speed because of road developments but remaining challenges related to underdeveloped traffic legislation, and limited public awareness and knowledge of road safety are overlooked. In 2010, the Cambodian National Road Safety Action Plan 2010–2020 was drafted, aiming to halve the number of deaths in traffic accidents in 2020. However, in reality, the number of road deaths did not decrease to the level anticipated in the action plan until 2016. In this article, the authors emphasize the importance of implementing the “three Es” namely Engineering, Enforcement and Education in developing countries such as Cambodia. In particular, the authors claim that the role of education to increase people's road safety awareness is neglected compared to the other two dimensions and thus, it is highly important to raise people's road safety awareness through education among the young people.     

Simulation and Visualisation of the Dynamic Behaviour of an Overhead Power System with Contact Breaking

For high speed rail traffic it is necessary to design overhead power systems which minimize the contact loss between pantograph head and contact wire. To predict how different design solutions will behave it is favourable to model and simulate the dynamic behaviour. In this paper a model of an overhead power system is specified and used in simulation. The model is suitable for simulation with contact loss since it includes specifications of impact conditions between pantograph head and contact wire. Two sets of equations of motion are specified, one for the contact case and one for the non-contact case. The model also includes lateral movement of the wire due to the zigzag span and friction between the pantograph head and the contact wire. It is shown how to make animations of the system behaviour using a MCAE-system. The animations are made using a geometrical model of the system together with results from numerical simulations.

Through the examples provided, use of the mathematical model and the geometrical model is presented. The response is visualised as time histories and phase plane diagrams of different coordinates and as animations of the total system response. The different types of visualisations make an excellent combination when studying the system behaviour of different design solutions.

In one example, simulation using the linearised set of equations gives the same results as simulation using the set of fully nonlinear equations, due to periodic response and the simple alternation of contact conditions. It is shown that the situation when any of the parameters vary suddenly is possible to simulate using the fully nonlinear equations of motion.