ROV attitude control based on multi-motor cooperative propulsion北大核心CSCD

[目的]为了提高遥控水下航行器(ROV)在复杂水下环境中的姿态控制性能,开展多电机协同推进的ROV姿态控制研究。[方法]首先,针对多电机系统的结构和算法,分别提出一种基于PID速度补偿器的偏差耦合结构和一种新型非奇异终端滑模控制(SMC)算法,并设计一种新颖的基于多电机协同推进的ROV姿态控制方法;然后,建立ROV的运动学和动力学模型,开展推进器组推力建模分析、解耦简化ROV动力学模型研究;最后,设计一种ROV滑模姿态控制器。[结果]仿真结果表明,所提的结构和算法可提高多电机系统的抗干扰性、同步性和快速响应能力,进而提高ROV姿态控制系统的稳定性与鲁棒性。[结论]所提方法可为ROV姿态控制提供一种新的可用方案。     

Influence of initial heeling angle on ship roll motion response北大核心CSCD

[目的]系统地研究初始横倾角对随机横浪下船舶横摇运动响应的影响。[方法]以路径积分法为基础,通过数值求解控制横摇运动微分方程概率属性的Fokker-Planck方程,得到横摇运动响应的概率分布。[结果]结果显示,初始横倾角对船舶横摇运动响应谱的影响有限,但对横摇角概率分布以及横摇运动响应极值分布的影响十分明显,且会造成船舶安全性的显著恶化。[结论]路径积分法可作为研究随机海浪下船舶横摇运动特性的有效数值方法。     

Widening the Panama Canal and U.S. ports: historical and economic impact analyses

ABSTRACT

The economic history of the U.S. illustrates how the role of many cities has been changed by being seaports or located on navigable rivers or lakes. Based on the widening of the Panama Canal in 2016, the West Coast ports that include the west coast seaports of California, Oregon, and Washington were expected to become less important, while the freight shares of the East Coast and Gulf ports would increase. By how much it has been not easy to measure or predict so far, but this study attempted to define some of the key parameters in the measurement. As well as several relevant background topics, both the demand- and supply-side versions of the National Interstate Economic Model, have been applied for the measurement of economic impacts. U.S. port authorities and policy makers at the local and national levels who respond and develop plans for coping with the new realities of the Panama Canal are able to understand the extent to which changes in shippers’ and land-mode transporters’ behaviors would undermine the logistics and the costs of their activities. Therefore, this study is important for a diverse spectrum of port development strategies in the U.S. to respond to the Canal expansion.     

Effects of perceived safety,involvement and perceived service quality on loyalty intention among ride-sourcing passengers

Transportation - Ride-sourcing services are increasingly popular since they were first introduced in the last decade. Particularly in developing countries where public transport systems have...     

半约束模型试验--一种验证随浪和斜浪中波浪力计算的手段

本文采用半约束模型试验技术，对一条高速船在规则波中随浪和斜浪工况进行了流体动力系列试验，以探讨航运的安全性，验证作用于船体上波浪力的估算方法。对每次试验，以波动方程的形式采用数值估算方法确定环绕船模的波浪运动的时间历程。并用同样的方法从测量数据中提取垂荡和纵摇与模型测量运动，一阶波导纵荡、横荡作用力和首摇力矩。因此合理比较理论计算的波浪力与力矩的时间历程成为可能。这表明SSPA海事动力学的研究所(MDL)模型试验设施可以提供高质量的测量，与所述计算方法结合起来可用来验证理论计算和建立半经验方法。     

S^2 BHCA Multiple AUVs cooperation oriented control architecture

Oceanographic survey, or other similar applications should be the applications of multiple AUVs. In this paper, the skill ＆ simulation based hybrid control architecture （S^2BHCA） as the controller＇s design reference was proposed. It is a multi-robot cooperation oriented intelligent control architecture based on hybrid ideas. The S^2BHCA attempts to incorporate the virtues of the reactive controller and of the deliberative controller by introducing the concept of the ＂skill＂. The additional online task simulation ability for cooperation is supported, too. As an application, a multiple AUV control system was developed with three ＂skills＂ for the MCM mission including two different cooperative tasks. The simulation and the sea trials show that simple task expression, fast reaction and better cooperation support can be achieved by realizing the AUV controller based on the S^2BHCA.     

A continuous network design model in stochastic user equilibrium based on sensitivity analysis

The continuous network design problem (CNDP) is known to be difficult to solve due to the intrinsic properties of non‐convexity and nonlinearity. Such kinds of CNDP can be formulated as a bi‐level programme, in which the upper level represents the designer's decisions and the lower level the travellers' responses. Formulations of this kind can be classified as either Stackelberg approaches or Nash ones according to the relationship between the upper level and the lower level parts. This paper formulates the CNDP for road expansion based on Stackelberg game where leader and follower exist, and allows for variety of travellers' behaviour in choosing their routes. In order to solve the problem by the Stackelberg approach, we need a relation between link flows and design parameters. For this purpose, we use a logit route choice model, which provides this in an explicit closed‐form function. This model is applied to two example road networks to test and briefly compare the results between the Stackelberg and Nash approaches to explore the differences between them.     

Total oil spill costs and compensations

Although counteracting environmental programmes and policies have been strengthened, large oil spills still occur at irregular intervals. The total oil spill costs and their compensations have attracted much interest from various parties, such as local stakeholders, and state and federal governments. This paper addresses five major cost categories whose aggregations are expected to cover the overall direct and indirect costs after the release of an oil spill. Among them, research costs should not be neglected, since they tend to be high if public attention has been drawn to the case. Through an examination of the relationship between the total oil spill costs and their admissible claims, we found that:

1. admissible claims do not cover the overall costs of the oil spill, and
2. admissible claims cannot be compensated in full in the case of large spills.

Clearly, a sound oil spill contingency management aims to minimize both the environmental impacts of areas most at risk and the total oil spill costs. In this paper an economic model for measuring environmental damages following an oil spill is addressed and applied to the Prestige case which happened to be the worst oil pollution in the history of Spain. The model indicates how an ideally a priori economic evaluation may intuitively help managers to make informed as well as fast decisions in contingency cases.     

Shape Optimization of Elliptical Road Containers Due to Liquid Load in Steady-State Turning

A numerical analysis of liquid load in elliptical road containers undergoing a steady-state turning manoeuvre is presented for containers of unrestricted size and for containers of fixed capacity. The liquid load is expressed in terms of the horizontal and vertical forces and the overturning moment created by these forces around the middle bottom point of the container. The moment is obtained by integrating the liquid free-surface equation and using numerical calculation of the resulting expressions. An optimization study with an objective to minimize the peak overturning moment is performed on containers of fixed capacity to identify the optimal height/width ratio of the container. The results of this investigation being of a general nature, i.e. with no restriction for an application, are particularly intended for road tankers under a steady turning manoeuvre, where they can be applied with high degree of accuracy.     

Active Roll Control for Passenger Cars

The development of a mathematical model of a limited bandwidth hydro-pneumatic suspension that is incorporated into a vehicle handling model is described. The combined model is used to evaluate a suitable control strategy for eliminating body roll during a cornering manoeuvre. The philosophy behind the roll control strategy has been to use feedback measurements of the body motions which do not compromise the ride control. A study of the influence of the position of the body motion feedback transducer on the effectiveness of the system to reduce the body roll is presented. Non-linear modelling of the suspension components for a 0.8g cornering manoeuvre has revealed performance limitations. Conclusions are drawn as to the effectiveness of the control scheme.