Development and prospects of initial alignment method for strap-down inertial navigation system北大核心CSCD

Initial alignment technology is directly related to the navigation accuracy and startup time of the strap-down inertial navigation system (SINS), and has always been regarded as a challenging focal point in the research field of inertial navigation. This paper makes a comprehensive survey of SINS initial alignment technology, briefly introduces the basic principles of initial alignment without latitude, coarse alignment with known latitude and precise alignment, and points out their advantages, disadvantages and applicable conditions. The research and effects of existing initial alignment error suppression techniques are then analyzed and discussed. Finally, according to the problems of existing initial alignment methods and the development requirements of the carrier, the future research direction of SINS initial alignment technology is predicted. © 2022 Journal of Clinical Hepatology. All rights reserved.     

Influence of initial heeling angle on ship roll motion response北大核心CSCD

[目的]系统地研究初始横倾角对随机横浪下船舶横摇运动响应的影响。[方法]以路径积分法为基础,通过数值求解控制横摇运动微分方程概率属性的Fokker-Planck方程,得到横摇运动响应的概率分布。[结果]结果显示,初始横倾角对船舶横摇运动响应谱的影响有限,但对横摇角概率分布以及横摇运动响应极值分布的影响十分明显,且会造成船舶安全性的显著恶化。[结论]路径积分法可作为研究随机海浪下船舶横摇运动特性的有效数值方法。     

基于核磁共振与无侧限抗压试验对纤维加固红黏土的宏微观特性研究

红黏土因其具有孔隙比大、易压缩等不良工程特性,常在工程建设中引起一列工程问题.为此,采用聚丙烯纤维对红黏土进行加固,并采用核磁共振(NMR)技术和无侧限抗压强度试验对不同含量纤维加固后土体的宏微观特性进行测试,得到以下结论:1)不同含量纤维加固后红黏土的T2谱形态基本保持一致,均在弛豫时间为1 ms附近出现峰值,且纤维含量为0.2％时,试样内部信号最强;不同含量纤维加筋土内部的孔径主要分布在0.01μm到0.05μm之间,且0.02μm孔径所占比例最大;试样的孔隙度和T2谱峰值面积随纤维含量的增加表现出先增加后减小的趋势,且均在纤维含量为0.2％时到达最大值;2)纤维能够明显增加红黏土的抗压强度,加筋土的抗压强度与纤维含量保持良好的线性增加关系;且随着纤维含量的增加,试样由脆性破坏逐渐表现为韧性破坏特征.3)纤维在土体中起到加筋作用,显著增加了土体间的连接力,且纤维相互交叉连接形成了空间网状结构,限制了土体的变形,使得加筋土抗压强度增加并表现出韧性破坏特征.     

Growth of urban transportation: Peoples republic of China

The Peoples Republic of China, with its great urban populations, is finding it necessary to develop a range of strategies to deal with increasing demand for goods and people movement, increasing motorization and the increasing congestion that results from the increasing travel demand. This paper discusses strategies being adopted in two northern cities, Changchun and Shenyang. Both transit and roadway programs are examined for Changchun. Problems and successes of a new toll road are examined for Shenyang. Sustained infrastructure investment is essential to assure the necessary mobility for economic growth.     

Shape Optimization of Elliptical Road Containers Due to Liquid Load in Steady-State Turning

A numerical analysis of liquid load in elliptical road containers undergoing a steady-state turning manoeuvre is presented for containers of unrestricted size and for containers of fixed capacity. The liquid load is expressed in terms of the horizontal and vertical forces and the overturning moment created by these forces around the middle bottom point of the container. The moment is obtained by integrating the liquid free-surface equation and using numerical calculation of the resulting expressions. An optimization study with an objective to minimize the peak overturning moment is performed on containers of fixed capacity to identify the optimal height/width ratio of the container. The results of this investigation being of a general nature, i.e. with no restriction for an application, are particularly intended for road tankers under a steady turning manoeuvre, where they can be applied with high degree of accuracy.     

A stated preference examination of time of travel choice for a recreational trip: An addendum

A paper was published in the immediately previous issue of this journal describing a stated preference experiment examining how people are influenced in the selection of a departure time for a hypothetical trip to see a movie. The title was ‘A stated preference examination of time of travel choice for a recreational trip’, Volume 30(3):17–44. Numbers were used to indicate references in the text of the paper and in Table 1 accompanying the text, but these numbers were omitted from the list of references at the end of the paper - making it very difficult to identify specific citations. The list of references from the paper is reprinted below with the reference numbers included. This provides a listing that can be used in conjunction with the text of the paper and Table 1 as published to identify specific citations as intended.     

Dynamics of Tracked Vehicles

This paper provides a brief review of the state-of-the-art of tracked vehicle dynamics, including mobility over soft terrain, ride dynamics over rough surfaces and manoeuvrability. It is found that considerable progress has been made in the development of analytical frameworks for evaluating and predicting tracked vehicle mobility over soft terrain, taking into account the characteristics of terrain response to normal and shear loading. Certain computer simulation models for tracked vehicle mobility have been gaining increasingly wide acceptance by industry and governmental agencies in product development and in procurement. It is also found that most of the research on tracked vehicle ride dynamics and manoeuvrability is confined to operations on rigid surfaces. To achieve a realistic evaluation and prediction of the dynamic behaviour of tracked vehicles in the field, the key is to have a better understanding of terrain response to dynamic vehicular loading, including its dynamic stiffness and damping. Challenges that face vehicle dynamicists in this emerging field are identified.     

Active Roll Control for Passenger Cars

The development of a mathematical model of a limited bandwidth hydro-pneumatic suspension that is incorporated into a vehicle handling model is described. The combined model is used to evaluate a suitable control strategy for eliminating body roll during a cornering manoeuvre. The philosophy behind the roll control strategy has been to use feedback measurements of the body motions which do not compromise the ride control. A study of the influence of the position of the body motion feedback transducer on the effectiveness of the system to reduce the body roll is presented. Non-linear modelling of the suspension components for a 0.8g cornering manoeuvre has revealed performance limitations. Conclusions are drawn as to the effectiveness of the control scheme.     

Basic Analytical Study of Pantograph-catenary System Dynamics

For a high speed electrical rail system, good dynamic performance of the pantograph-catenary system is vital for smooth and continuous current collection. It has been known for many years that to achieve this the head of the pantograph should be made as light as possible and the average stiffness of the catenary should be high. These conclusions, however, have been reached by numerical modelling and operational experience. In this paper the pantograph-catenary system is modelled as a time-varying, single degree-of-freedom system to facilitate an analytical investigation of the system dynamics. Although the model is very simple, it allows physical insight into the dynamic behaviour of the system, and because the excitation is parametric it also allows the stability of the system to be investigated. The finite element method is used to determine the catenary characteristics and Floquet theory is used to analyse the behaviour of the coupled system.