智能汽车专业校企合作模式及人才培养方式的探究

智能汽车已经成为未来汽车领域的发展方向,且高校逐渐与企业合作,建立智能汽车人才培养模式。但是现阶段,校企合作深度以及人才培养方式仍然存在一定的不足,不利于为智能汽车领域输送更多的人才。基于此,本文主要探究智能汽车专业校企合作模式以及人才培养模式,详细阐述智能汽车专业校企合作模式及人才培养模式中存在的问题,进而提出针对性的建议。     

基于PSIM的磁力轴承用功率放大器仿真研究

本文阐述磁力轴承用PWM功率放大器的实现原理,推导传递函数,理论上分析了功放电流纹波特性并推导电流纹波的数学表达式,建立了基于PSIM的功放仿真模型,依据奈奎斯特稳定判据对PI参数进行设计并进行验证,在软件中对功放的纹波特性进行仿真,并与理论分析进行对比.仿真表明在相同母线电压下,三电平功放比两电平功放纹波小很多.     

燃料电池氢喷射器控制技术研究

为满足燃料电池功率需求,实现氢气侧压力平滑控制,提出了一种氢喷射器控制方案。通过周期性控制喷嘴数和peak-hold时间占空比,并采用了调节量屏蔽方法,以提高压力输出调节能力。建立实验系统,写入软件进行控制实验,表明了该方法的可行性。     

Development and prospects of initial alignment method for strap-down inertial navigation system北大核心CSCD

Initial alignment technology is directly related to the navigation accuracy and startup time of the strap-down inertial navigation system (SINS), and has always been regarded as a challenging focal point in the research field of inertial navigation. This paper makes a comprehensive survey of SINS initial alignment technology, briefly introduces the basic principles of initial alignment without latitude, coarse alignment with known latitude and precise alignment, and points out their advantages, disadvantages and applicable conditions. The research and effects of existing initial alignment error suppression techniques are then analyzed and discussed. Finally, according to the problems of existing initial alignment methods and the development requirements of the carrier, the future research direction of SINS initial alignment technology is predicted. © 2022 Journal of Clinical Hepatology. All rights reserved.     

Influence of initial heeling angle on ship roll motion response北大核心CSCD

[目的]系统地研究初始横倾角对随机横浪下船舶横摇运动响应的影响。[方法]以路径积分法为基础,通过数值求解控制横摇运动微分方程概率属性的Fokker-Planck方程,得到横摇运动响应的概率分布。[结果]结果显示,初始横倾角对船舶横摇运动响应谱的影响有限,但对横摇角概率分布以及横摇运动响应极值分布的影响十分明显,且会造成船舶安全性的显著恶化。[结论]路径积分法可作为研究随机海浪下船舶横摇运动特性的有效数值方法。     

Investigation of carriers’ ability to transfer toll increases: an empirical analysis of freight agents’ relative market power

Transportation - Design of effective freight policies requires a comprehensive understanding of freight agents’ interactions. A critical component of the interaction is the freight...     

专业力量齐发力 复工复产有实招——北海航海保障中心抗疫情保复工侧记

疫情阻击战到了最关键的阶段,保复工、稳发展迫在眉睫。北海航海保障中心(简称“中心”)主动作为,有效履职,积极加强与属地海事、引航、气象、港口等单位的协调沟通,针对辖区LNG、煤炭能源运输提供定制化优先服务,保障各类导助航设施、系统平稳正常运行。新冠肺炎疫情期间,共计为辖区1.7万余艘次船舶航行和13.5万人次旅客安全运送提供了及时、高效的航海保障服务。     

Toward using social media to support ridesharing services: challenges and opportunities

Ridesharing has been attracting increasing attention from both academia and industry. One of the challenges posed by the study of ridesharing is to identify the most valuable information for improving the ridesharing decisions taken by participants. Another challenge is to use harvesting techniques to extract specific types of travel-related information. Many methods have been developed by the community in order to solve these issues. However, due to a lack of information sharing between different transit authorities and the difficulty of identifying subjective perceptions of the experience of ridesharing, understanding and evaluating how social media data might support or obstruct goals for mobility, safety and environmental sustainability in ridesharing is a difficult task. In this survey, we first analyze the literature on ridesharing with a focus on the properties and model of service, and introduce a framework to describe the major components required for a ridesharing service. Then, we illustrate the potential value of information extracted from social media and present the rationale for harvesting travel-related data. Finally, we detail some possible directions and different approaches for using social media data, and highlight their assets and drawbacks.     

深海变径声阵缆布放回收装置研究

本文提出了基于深海工作站运搭载的变径缆海底布放回收方式，介绍了变径缆海底布放回收装置的主要工作原理和结构组成，完成了布放回收装置主要部套件的设计计算以及和电液控制系统的设计及计算。     

双电机混动车辆串并联模式切换过程设计与实现

针对双电机混动车辆在车辆运行过程中串并联驱动模式的切换需求,通过分析双电机混联构型结构特点,提出一种通过发动机、发电机和驱动电机协调控制实现无动力中断的切换控制方法.将串联到并联切换过程分为发动机工作点转移、离合器结合、动力源切换三个阶段,将并联到串联切换过程划分为动力源切换、离合器打开、发动机工作点转移三个阶段,能够实现串并联驱动模式的顺利切换,同时上述切换阶段划分也能较好的支持串并联切换过程中的切换意图改变操作.最后进行了控制策略的实车验证,切换过程中冲击度小于8.结果 表明,所提出的串并联切换控制方法能够完全支持车辆运行过程中的串并联切换.