ROV attitude control based on multi-motor cooperative propulsion北大核心CSCD

[目的]为了提高遥控水下航行器(ROV)在复杂水下环境中的姿态控制性能,开展多电机协同推进的ROV姿态控制研究。[方法]首先,针对多电机系统的结构和算法,分别提出一种基于PID速度补偿器的偏差耦合结构和一种新型非奇异终端滑模控制(SMC)算法,并设计一种新颖的基于多电机协同推进的ROV姿态控制方法;然后,建立ROV的运动学和动力学模型,开展推进器组推力建模分析、解耦简化ROV动力学模型研究;最后,设计一种ROV滑模姿态控制器。[结果]仿真结果表明,所提的结构和算法可提高多电机系统的抗干扰性、同步性和快速响应能力,进而提高ROV姿态控制系统的稳定性与鲁棒性。[结论]所提方法可为ROV姿态控制提供一种新的可用方案。     

Influence of initial heeling angle on ship roll motion response北大核心CSCD

[目的]系统地研究初始横倾角对随机横浪下船舶横摇运动响应的影响。[方法]以路径积分法为基础,通过数值求解控制横摇运动微分方程概率属性的Fokker-Planck方程,得到横摇运动响应的概率分布。[结果]结果显示,初始横倾角对船舶横摇运动响应谱的影响有限,但对横摇角概率分布以及横摇运动响应极值分布的影响十分明显,且会造成船舶安全性的显著恶化。[结论]路径积分法可作为研究随机海浪下船舶横摇运动特性的有效数值方法。     

半刚性基层沥青路面反射裂缝足尺试验研究

通过反射裂缝足尺试验来评价纤维增强沥青混合料和玻璃纤维土工格栅对抑制反射裂缝的效果，对抑制机理作了分析。试验证明，在普通沥青混合料中加入聚酯纤维以及使用改性沥青可使脆化点温度降低，增强低温抗裂性，加入聚酯纤维和在基层与面层之间铺设玻璃纤维格栅可有效抑制反射裂缝。     

乍嘉苏高速公路改性沥青SMA-13面层试验段施工

通过在浙江省乍浦—嘉兴—苏州高速公路改性沥青SMA—13路面试验段施工,总结出一套较为成熟的施工工艺,作为大面积施工依据。     

Shape Optimization of Elliptical Road Containers Due to Liquid Load in Steady-State Turning

A numerical analysis of liquid load in elliptical road containers undergoing a steady-state turning manoeuvre is presented for containers of unrestricted size and for containers of fixed capacity. The liquid load is expressed in terms of the horizontal and vertical forces and the overturning moment created by these forces around the middle bottom point of the container. The moment is obtained by integrating the liquid free-surface equation and using numerical calculation of the resulting expressions. An optimization study with an objective to minimize the peak overturning moment is performed on containers of fixed capacity to identify the optimal height/width ratio of the container. The results of this investigation being of a general nature, i.e. with no restriction for an application, are particularly intended for road tankers under a steady turning manoeuvre, where they can be applied with high degree of accuracy.     

Active Roll Control for Passenger Cars

The development of a mathematical model of a limited bandwidth hydro-pneumatic suspension that is incorporated into a vehicle handling model is described. The combined model is used to evaluate a suitable control strategy for eliminating body roll during a cornering manoeuvre. The philosophy behind the roll control strategy has been to use feedback measurements of the body motions which do not compromise the ride control. A study of the influence of the position of the body motion feedback transducer on the effectiveness of the system to reduce the body roll is presented. Non-linear modelling of the suspension components for a 0.8g cornering manoeuvre has revealed performance limitations. Conclusions are drawn as to the effectiveness of the control scheme.     

双相化处理工艺对冷拔双相钢丝组织和性能的影响

研究了08Mn2Si钢不同工艺处理后双相组织的形态及冷拔中组织与性能的变化,结果得到:950℃预淬火后再经临界区加热淬火时可以得到细小均匀的纤维状双相组枳,这种组织在冷拔中转变为很细的平行于拔丝方向的纤维状组织,且具有最好的强度和韧性。     

强化胎盘因子对细胞因子产生的影响

在观察了强化胎盘因子对淋巴细胞增殖试验影响的基础上,应用CTLL-2和7TD_1两种细胞株对强化胎盘因子刺激后的小鼠脾脏细胞分泌白细胞介素-2(IL-2)和白细胞介素-6(IL-6)水平分别进行了实验研究。结果表明,强化胎盘因子促进T淋巴细胞增殖,使小鼠脾脏细胞分泌IL-2和IL-6水牛均明显提高,有增强机体免疫功能的作用。     

工程机械租赁业的现状及前景

“租赁”在中国实际上已经有很长的历史。然而，工程机械租赁业在中国大陆是20世纪90年代才兴起的，其发展也就是近20年的事情.     

Evasive manoeuvres with a steering robot

In the pursuit of an objective rating on vehicle stability performance, it is always desirable to reduce disturbances and inconsistencies during experimental evaluations, especially the ones introduced by human drivers. This paper presents the development of a steering robot designed for closed-loop steering tasks during evasive manoeuvres. It describes the controller structure and discusses experimental results, in addition to simulation/vehicle model verifications and theoretical control analysis.