Manpower and employment issues

Overmanning and restrictive labour practices are major causes of low productivity in Indian ports. Proposals are put forward for a programme of reforms to support investment in modern cargo handling systems.     

Using longitudinal methods for analysis of a short-term transportation demonstration project

This paper documents an application of panel, or longitudinal data collection in the evaluation of a TSM (Transportation Systems Management) demonstration project. The project was a four-week demonstration of staggered work hours in downtown Honolulu during February–March 1988. The 4 wave panel survey elicited commuting experiences of approximately 2,000 downtown employees at two week intervals before and during the project. The sample involved both employees who participated in the project by shifting their work hours, and those who did not. The panel survey was augmented by floating-car observations of travel times on major routes into downtown Honolulu on the same four dates.The purpose of the analysis was to determine whether employee commute times were affected, and if so, how these changes were distributed among various employee segments. Two methods were used. First, travel time changes were estimated using paired t-tests. Second, regression equations were used to estimate project time savings as a function of trip length, route, and location of residence. Results show that travel time savings due to the project were typically small, less than ten percent. Nonparticipants experienced greater savings than participants, and some segments of participants experienced longer travel times during the project. The panel method proved to be an effective way to measure project travel time impacts and shows that the method is appropriate in short time applications.Presented at the Annual Meeting of Transportation Research Board, January 7–11. 1990, Washington, D.C.     

功率循环测试中衬底焊接层的可靠性

基板与陶瓷衬底之间的焊层寿命通常利用IGBT模块的被动加热和冷却(热循环)来测试,但这种试验会引起焊层失效(分层)。实际应用中,IGBT和二极管芯片是主动被加热的,诸如焊线脱落等其它模式的失效也会限制使用寿命,通常可通过功率循环试验来评估这种应力的影响。本文通过功率循环试验来评估衬底焊层的失效,利用高循环周次的测试进行有效的衬底焊层热循环试验,其关键在于功率循环过程中焊层温度的预测。在温度波动不大的条件下,比较了被动热循环和主动功率循环时对焊接寿命的影响。     

Novel Electrically Stimulated Catalytic Converter Prototype for Replacement of Conventional Auto Exhaust Emission Converters

High voltage electrostatics and corona discharge are utilized for various applications in pollution and environmental control. The traditional applications have many flaws due to improper construction of electrode design and assembly that cause system failure, in particular when electrically stimulated devices are exposed to high humidity. A new innovative-patented design by Hamade, electrically stimulated catalytic converter(ESCC),eliminates such flaws and shows the wide practical applications of the new design. The new design utilized previous patented designs and work of the same inventor but retrofitted for catalytic auto exhaust emission control. The current and previous patents include: employing electrically stimulated filtration(ESF) to replace high efficiency particulate air(HEPA) filters, treatment of biological and infectious diseases, electret fabrication, and, most notably, the invention of a new electrically stimulated catalytic converter(ESCC). The electrically stimulated catalytic converter invention includes an exhaust conduit fed from the engine exhaust port with a housed corona charger apparatus. The opposite end is opened to the atmosphere outside of the vehicle or connected to a reduced-size catalytic converter. The corona charger is intrusively or non-intrusively associated with a main flow path defined by the exhaust conduit. The corona charger includes at least one electrode, which may be recessed away from, the main flow path. A plurality of corona chargers may be used in various combinations, optimally a two dimensional grid. The electrically stimulated catalytic converter is adapted to treat and eliminate auto exhaust pollution emission to air.     

International Symposium on the Ice Carrying Trade at Sea

Overmanning and restrictive labour practices are major causes of low productivity in Indian ports. Proposals are put forward for a programme of reforms to support investment in modern cargo handling systems.     

Lagrangian flow in the California Undercurrent, an observation and model comparison

During the period 1992–1998, 38 isobaric RAFOS floats were deployed to sample the subsurface flow of the California Undercurrent. The deployments, released over the California continental slope west of San Francisco, have sampled robust year-round poleward subsurface flow associated with the Undercurrent most seasons and the combined inshore current and Undercurrent in winter. Two other types of flow have been seen: a region of weak flow with little net displacement just west of the California Undercurrent, and an active westward propagating eddy field. This eddy field appears to be the primary mechanism for moving floats from the Undercurrent into the ocean interior. The observations and statistics from the RAFOS floats are compared with Lagrangian estimates of particles tracked in a global high resolution ocean simulation in order to evaluate the fidelity of the model along an eastern boundary. The results show that the model reproduces the general character of the flow reasonably well, but underestimates both the mean and eddy energies by a substantial amount.     

Variability of the Bohai Sea circulation based on model calculations

The circulation and the hydrography of the Bohai Sea are simulated with the Hamburg Shelf Ocean Model (HAMSOM). The model is three-dimensional, prognostic baroclinic and has a resolution of 5 min in latitude and longitude and 10 layers in the vertical. It is initialised and forced with the five main tidal constituents, temperature and salinity distributions taken from the Levitus database, monthly mean river run-off values and European Centre for Medium Range Weather Forecast (ECMWF) re-analysed data of air pressure, wind stress and of those parameters relevant for the calculation of heat fluxes. The simulation period covers 14 years from 1980 to 1993 due to the availability of the time-dependent ECMWF forcing.The results are analysed by means of time series and EOFs focussing on the interpretation of fluctuations with periods above the tidal cycle. Furthermore, tracer simulations are carried out and turnover times are calculated in order to evaluate the importance of these fluctuations on the renewal and transport of water masses in the Bohai Sea.One of the major outcomes of the investigation is the overall dominance of the annual cycle in all hydrographic parameters and the importance of stochastic weather fluctuations on the transport of water masses in the Bohai Sea.     

Egg production and associated losses of carbon, nitrogen and fatty acids from maternal biomass in Calanus finmarchicus before the spring bloom

We present concurrent data on ingestion, egg production and the loss of maternal biomass in pre-spring bloom female Calanus finmarchicus incubated under conditions representative of those in situ in the North Atlantic. A balanced metabolic budget was constructed and used to examine the relative importance of ingestion and biomass for fuelling egg production during the incubations. Ingested carbon was not sufficient to meet the observed demands for egg production. More than 80% of the carbon utilised by the females was instead derived from their biomass. Fatty acid analysis demonstrated that the storage reserves, 20:1 (n−9) and 22:1 (n−11), were virtually absent before experimentation began, and therefore could not have been used to supply the carbon required for egg production during the incubations. The C:N mass-specific ratio of the biomass utilised was 4.1, suggesting that the females had instead catabolised protein in order to meet their metabolic demands. These results suggest that C. finmarchicus adopts a sacrificial reproductive strategy when food availability is low.     

The structure of dissipation in the western Irish Sea front

We report on an intensive campaign in the summer of 2006 to observe turbulent energy dissipation in the vicinity of a tidal mixing front which separates well mixed and seasonally stratified regimes in the western Irish Sea. The rate of turbulent dissipation ε was observed on a section across the front by a combination of vertical profiles with the FLY dissipation profiler and horizontal profiles by shear sensors mounted on an AUV (Autosub). Mean flow conditions and stratification were obtained from a bed mounted ADCP and a vertical chain of thermistors on a mooring. During an Autosub mission of 60 h, the vehicle, moving at a speed of ~ 1.2 m s^− 1, completed 10 useable frontal crossings between end points which were allowed to move with the mean flow. The results were combined with parallel measurements of the vertical profile of ε which were made using FLY for periods of up to 13 h at positions along the Autosub track. The two data sets, which show a satisfactory degree of consistency, were combined to elucidate the space–time variation of dissipation in the frontal zone. Using harmonic analysis, the spatial structure of dissipation was separated from the strong time dependent signal at the M₄ tidal frequency to yield a picture of the cross-frontal distribution of energy dissipation. A complementary picture of the frontal velocity field was obtained from a moored ADCP and estimates of the mean velocity derived from the thermal wind using the observed density distribution. which indicated the presence of a strong (0.2 m s^− 1) jet-like flow in the high gradient region of the front. Under neap tidal conditions, mean dissipation varied across the section by 3 orders of magnitude exceeding 10^− 2 W m^− 3 near the seabed in the mixed regime and decreasing to 10^− 5 W m^− 3. in the strongly stratified interior regime. The spatial pattern of dissipation is consistent in general form with the predictions of models of tidal mixing and does not reflect any strong influence by the frontal jet.