Estimating the value of risk reductions for car drivers when pedestrians are involved: a case study in Spain

We estimated the benefits associated with reducing fatal and severe injuries from traffic accidents using a stated choice experiment where choice situations were generated through a statistically efficient design. Specifically, the risk variables were defined as the expected annual number of vehicle car-users that suffered their death or were severely injured in a traffic accident. In addition, and differing from previous research, the number of pedestrians that died or were severely injured in traffic accidents per year was also included as a risk attribute in the choice experiment, to attempt at measuring drivers’ willingness to pay to reduce the risk of hitting pedestrians in a crash. The empirical setting was a choice of route for a particular trip that a sample of car drivers periodically undertakes in Tenerife, Spain. Models were estimated accounting for random taste heterogeneity and pseudo-panel data correlation. The median of the distribution of simulated parameters was used to obtain a representative measure for the monetary valuation of risk reductions. We found that the ratio between the values of reducing the risk of suffering a serious injury and that of reducing a fatality was approximately 18 %. Further, and quite novel, we also found that the value of reducing a pedestrian fatality was 39 % of the value of reducing a car occupant fatality.     

Value of travel time reliability: A review of current evidence

Travel time reliability is a fundamental factor in travel behavior. It represents the temporal uncertainty experienced by travelers in their movement between any two nodes in a network. The importance of the time reliability depends on the penalties incurred by the travelers. In road networks, travelers consider the existence of a trip travel time uncertainty in different choice situations (departure time, route, mode, and others). In this paper, a systematic review of the current state of research in travel time reliability, and more explicitly in the value of travel time reliability is presented. Moreover, a meta-analysis is performed in order to determine the reasons behind the discrepancy among the reliability estimates.     

Rapid first-stage tests of on-ship infection

Protection against on-ship infectious disease—whether due to mishap or to harmful purpose—faces special situational problems. Sometimes, when infection levels on board have reached threshold levels, emergency actions are required. Often, the most thorough strategies for responding to threat are not feasible. A rapid first-stage test (RFT) is a fast, minimally invasive procedure used to rule out from possible infection a large percentage of an infection-threatened group. Prevention and control of on-ship infection need to combine various interconnected tactics. When timely criterion tests are not possible, the medical team must adopt fast alternative measures. The methods used to summarize protection against on-ship infectious agents included a scientific literature review and a web search. The fields of the review were maritime, health, and technology sources. Special attention was paid to material dealing with risks and threats of on-ship penetration by infectious agents, on-ship infection prevalence thresholds, and rapid diagnostic screens. The Bayes rule and the law of large numbers were applied to the analysis, for large on-ship populations, of RFT indications of crossing of an infection prevalence threshold. The increasing risk of serious on-ship infection—either accidental or purposeful—calls for a multi-layered protection approach. RFTs are a key part of the outer layer of such a defense. Well-designed and well-administered RFTs provide several advantages for defense against on-ship infection: low-cost, non-invasive, fast, and focuses on a drastically smaller number of infection possibilities.     

Network representation,continuum approximations and a solution to the spatial aggregation problem of traffic assignment

This paper complements the preceding one, which showed how one could modify equilibrium traffic assignment algorithms for networks with many centroids. In this one it is shown how one can substitute centroids by zones with continuous population densities. The technique, which is mathematically guaranteed to approximate a flow pattern in accordance with Wardrop's user equilibrium criterion, requires some geometrical calculations which can be handled off-line. With the suggested approach, it is possible to represent the spatial distribution of trip ends more realistically and this allows traffic assignment models to capture the effects of short and intrazonal trips in a way previously impossible. The method is shown to be computationally feasible.     

Surface patterns of zooplankton spatial variability detected by high frequency sampling in the NW Mediterranean. Role of density fronts

High frequency sampling was performed in daylight hours along a 35 km transect in the Ligurian Sea to investigate the upper layer zooplankton distribution during the spring phytoplankton bloom. The results show detailed spatial structure and biomass of key zooplankton functional groups, copepods, salps and krill larvae, within the different water masses characterizing this region. Although observed values of total copepod biomass distribution were rather constant along the transect, species-specific patterns were observed in the copepod spatial distribution. The larger species Calanus helgolandicus, as well as Centropages typicus, Oithona spp., and Oncaea spp., were associated with the frontal zone. However, Acartia spp. had a scattered distribution, and Clausocalanus/Paracalanus did not have a clear pattern. In addition, krill larvae were concentrated in the frontal area and salps had a scattered pattern. The cross-shore zooplankton distribution appeared strongly influenced by both the Northern Ligurian current governing inshore waters, which acts as a major flushing forcing, and the Ligurian front, which governs offshore waters and may act as retention area for zooplankton.     

Vibrations Generated by Rail Vehicles: A Mathematical Model in the Frequency Domain

Movement of railway vehicles generates mechanical vibrations of a wide range of frequency. Depending on track materials, dissipation in form of viscous and hysteretic damping is present, and stiffness depends on strain-rate. In a previous paper (Castellani et al., 1998), a mathematical model to describe track materials has been developed in the frequency domain. The present paper applies this model, and attempts an analytical formulation of vehicle-track and soil interaction in the frequency domain. Rail vibrations during the passage of a vehicle are generated by three families of forces: a) the weight of the moving vehicle, b) the inertial reaction of the vehicle under the effect of corrugations over an undeformable rail, and, c) the vehicle inertial forces due to displacements of the rail. The first two groups of forces do not depend on the rail displacement, and the related mathematical formulation is a simple problem of forces at a mobile point of application. Formulation of the vehicle inertial forces, related to the rail vibration, requires reference to the acceleration of the rail, as seen by an observer in motion with the vehicle itself. Moreover, it is necessary to express the equilibrium equation of two dynamic systems, the vehicle and the track, at a the movable point of contact. There is no straight numerical procedure to solve this equation in the frequency domain. In the paper two theoretical propositions (Fryba, 1988; Grassie et al., 1982) are revisited with reference to the effect of the transit of a single wheel. Fryba infers that, in the absence of corrugations, the forces c) are null. Grassie et al. (1982) present a mathematical formulation of the interaction between wheel and rail, at mobile point of contact. At each position, the interaction force is of impulsive type. They presume that for a corrugation of harmonic type, of wavelength ?, the wheel is subject to a harmonic motion, of the frequency f = V/?, where V is the wheel velocity. All other frequency components, due to the impulse, are disregarded. Both these assumptions are shown to be inconsistent from a theoretical point of view, however they suggest suitable approaches to the solution.     

Clockwise hysteresis loops in the Macroscopic Fundamental Diagram: An effect of network instability

A recent study reported that the Macroscopic Fundamental Diagram of a medium size city exhibited a clockwise hysteresis loop on a day in which a major disturbance caused many drivers to use unfamiliar routes. It is shown below that, even in a perfectly symmetric network with uniform demand, clockwise loops are to be expected when there are disturbances, especially if the disturbances cause a significant fraction of the drivers to not change routes adaptively. It is also shown that when drivers are not adaptive networks are inherently more unstable as they recover from congestion than as they are loaded. In other words, during recovery congestion tends more strongly toward unevenness because very congested areas clear more slowly than less congested areas. Since it is known that uneven congestion distributions reduce network flows, it follows that lower network flows should arise during recovery, resulting in clockwise loops. Fortunately, the presence of a sufficient number of drivers that choose routes adaptively to avoid congested areas helps to even out congestion during recovery, increasing flow. Thus, clockwise loops are less likely to occur when driver adaptivity is high.     

Spatial impacts of road pricing: Accessibility, regional spillovers and territorial cohesion

Road pricing policies are gaining prominence in EU countries. These policies have positive impacts leading to mobility patterns which are socially and environmentally more desirable, but they also have negative impacts. One negative impact is to be found in regional accessibility, due to the increase in generalized transport costs. This study presents a methodology based on accessibility indicators and GIS to assess the accessibility impacts of a road pricing policy. The methodology was tested for the Spain’s road network considering two road pricing scenarios. It enables not only the more penalized regions to be identified but also negative road pricing spillover effects between regions. These effects are measured in terms of accessibility changes occurring in one region produced by charges implemented in another region. Finally, the study of accessibility disparities (by calculating inequality indexes for each of the scenarios considered), provides policymakers with useful information regarding the impact of road pricing policies from the point of view of territorial cohesion.     

A topological route choice model for metro

This article presents a route choice model for public transit networks that incorporates variables related to network topology, complementing those found in traditional models based on service levels (travel time, cost, transfers, etc.) and users’ socioeconomic and demographic characteristics (income level, trip purpose, etc.). The topological variables represent concepts such as the directness of the chosen route and user knowledge of the network. For both of these factors, the necessary data is endogenous to the modelling process and can be quantified without the need for information-gathering beyond what is normally required for building route choice models. Other novel variables in the proposed formulation capture notions of user comfort such as vehicle occupancy rates and certain physical characteristics of network stations. We conclude that these new variables significantly improve the explanatory and predictive ability of existing route choice specifications.