融合可持续理念的交通规划方案比选方法——以亚特兰大大都市区为例

越来越多的机构开始为交通系统的可持续发展定义,并试图将这一概念融入区域交通规划过程.然而,只有极少数的区域规划机构意识到了交通系统和土地利用变化给经济、环境和社会生活质量(这三者通常被认为是可持续交通系统的三个基本方面)带来的广泛影响.首先,论述了使用多个可持续发展指标的多准则决策方法,并应用其评估亚特兰大大都市区的三...     

Experimental study on a model azimuthing podded propulsor in ice

The objective of this study was to investigate the performance of a model azimuthing podded propulsor in ice-covered water. Model tests were carried out with two different depths of cut into the ice (15 and 35 mm), two different ice conditions (presawn and pack ice conditions), and four different azimuthing angles. The depth of cut is the maximum penetration depth of the propeller blade into the ice block. The 0.3-m-diameter model propeller was operated in a continuous ice milling condition. Ice loads were measured by several sensors which were installed in various positions on the model. Six one-axis pancake-style load cells on the top of the model measured the global loads and two six-component dynamometers were installed on the shaft to measure the shaft loads. One six-component dynamometer was attached to the one of the propeller blades inside the hub to measure the blade loads. The pod unit and propeller performance in ice are presented. Ice-related loads, which were obtained when the blade was inside the ice block, are introduced and discussed. During the propeller–ice interaction, a blade can experience the path generated by the previous blade, which is called the shadowing effect. The effects of shadowing, depth of cut, azimuthing angle, and advance coefficient on propulsor performance are presented and discussed.     

Study of in-vehicle route guidance systems for improvement of right-side drivers in the Japanese traffic system

A country can adopt one of two standards for traffic flow — cars may travel on the left or right side of the road. When drivers who are accustomed to driving on the right side of the road drive on the left side, and vice versa, the mental workload is likely increased due to the driver’s unfamiliarity with a new language, the position of the driver’s seat, different driving directions, and other factors that differ from those of their home country. One method of doing this is to make sure that the in-vehicle route guidance information (RGI) is not overly complicated — thereby assisting drivers in improving their safety. Consequently, the aim of this study was to facilitate mobility and improve safety for natural right-side drivers driving temporarily in left-side traffic. In this study, driver behavior and workload — given various types of RGI — were evaluated in a driving simulator with a variety of prescribable test conditions. This research was composed of two experiments. In the first, various types of in-vehicle route guidance systems were tested and evaluated in terms of their characteristics and associated driver behaviors (while driving). In the second experiment, systemic factors and effectiveness were evaluated by two combined systems, arrow and map-type information, based on the results of the first experiment. In light of both experiments, the various types of route guidance systems were discussed in terms of their results. A navigation system was proposed to alleviate some of the secondary tasks such as route selection.     

A Trip Reconstruction Tool for GPS-based Personal Travel Surveys

ABSTRACT

This article reports on the development of a trip reconstruction software tool for use in GPS-based personal travel surveys. Specifically, the tool enables the automatic processing of GPS traces of individual survey respondents in order to identify the road links traveled and modes used by each respondent for individual trips. Identifying the links is based on a conventional GIS-based map-matching algorithm and identifying the modes is a rule-based algorithm using attributes of four modes (walk, bicycle, bus and passenger-car). The tool was evaluated using GPS travel data collected for the study and a multi-modal transportation network model of downtown Toronto. The results show that the tool correctly detected about 79% of all links traveled and 92% of all trip modes.     

The planning of aircraft routes and flight frequencies in an airline network operations

This research is aimed at developing a model that maximizes system profit when determining the aircraft routes and flight frequencies in a network. The model employs network flow techniques to effectively collect or deliver passenger flows from all origins to all destinations using non‐stop and multi‐stop flights in multi‐fleet operations. The model was formulated as a multi‐commodity network flow problem. A Lagrangian‐based algorithm was developed to solve the problem. To test the model in practice, a case study is presented.     

Development of a low-noise cooling fan for an alternator using numerical and doe methods

An alternator, which converts mechanical rotational energy into electrical energy, is an important component of a vehicle. Alternators operate over a broad range of rotational speeds, typically from 3,000 RPM to 18,000 RPM, which demands a cooling fan producing sufficient airflow, ideally with a minimum of noise. In the current study, an optimized alternator-cooling fan was developed through a linked DOE(Design OF Experiment) process and numerical analysis. The SC/Tetra and FlowNoise S/W programs were used to calculate flow rates and noise levels, respectively, for the newly developed fan. Compared with original model, the numerical results predicted a 3 dBA noise reduction; the measured reduction was 4 dBA.     

Effect on friction of engine oil seal with engine oil viscosity

Low viscosity engine oil can improve a vehicle’s fuel economy by decreasing the friction between the engine components. Frictional torque varies with the velocity change due to different viscosity characteristics of SAE grade 5W-20, 5W-30 and 5W-40 engine oils. The viscosity for each of these grades was measured to outline the effect low viscosity engine oils have on engine friction, which may lead to improved fuel economy. Engine oil seal frictional torque increases with the shaft rotational speed for all three engine oil grades. A decrease in engine oil seal frictional torque was confirmed when low viscosity engine oil was used. Also, the leak-free performance of the engine oil with the seal satisfied the life limit durability test criteria. Thus, low viscosity engine oil may be used to improve fuel economy by decreasing the frictional loss of the engine oil seal while having no negative impact on performance due to leak-free functioning.     

Motorway crash duration and its determinants: do durations vary across motorways?

Traffic congestion has been a growing issue in many metropolitan areas during recent years, which necessitates the identification of its key contributors and development of sustainable strategies to help decrease its adverse impacts on traffic networks. Road incidents generally and crashes specifically have been acknowledged as the cause of a large proportion of travel delays in urban areas and account for 25% to 60% of traffic congestion on motorways. Identifying the critical determinants of travel delays has been of significant importance to the incident management systems, which constantly collect and store the incident duration data. This study investigates the individual and simultaneous differential effects of the relevant determinants on motorway crash duration probabilities. In particular, it applies parametric Accelerated Failure Time (AFT) hazard‐based models to develop in‐depth insights into how the crash‐specific characteristic and the associated temporal and infrastructural determinants impact the duration. AFT models with both fixed and random parameters have been calibrated on one year of traffic crash records from two major Australian motorways in South East Queensland, and the differential effects of determinants on crash survival functions have been studied on these two motorways individually. A comprehensive spectrum of commonly used parametric fixed parameter AFT models, including generalized gamma and generalized F families, has been compared with random parameter AFT structures in terms of goodness of fit to the duration data, and as a result, the random parameter Weibull AFT model has been selected as the most appropriate model. Significant determinants of motorway crash duration included traffic diversion requirement, crash injury type, number and type of vehicles involved in a crash, day of week and time of day, towing support requirement and damage to the infrastructure. A major finding of this research is that the motorways under study are significantly different in terms of crash durations; such that motorway 1 exhibits durations that are on average 19% shorter compared with the durations on motorway 2. The differential effects of explanatory variables on crash durations are also different on the two motorways. The detailed presented analysis confirms that looking at the motorway network as a whole, neglecting the individual differences between roads, can lead to erroneous interpretations of duration and inefficient strategies for mitigating travel delays along a particular motorway.     

Clamping performance of fastener in windshield wiper assembly using theoretical and experimental methods

Improper clamping of wiper arms can cause problems in the operation of the wiper. An excessive clamping force can cause damage to the wiper arm head. On the other hand, an insufficient clamping force can cause self-loosening of the nut. Given the lack of direct research on the clamping force of the fastener in wiper assembly, this study verifies the existing clamping performance of the fastener in windshield wiper assembly by theoretical and experimental methods. The theoretical calculation results show that all the clamping performance are satisfied under the general snow load condition. However, under the critical load condition, maximum assembly preload and safety margin against slipping are in disagreement with the standard values. This problem is solved by increasing the strength grade of the bolt. The experimental results show a reducing tendency of the clamping force during the snow durability test. However, this reducing clamping force during the 60,000 test cycles is acceptable. In the case of nut reusing more than two times possibly cause a problem of its loosening because of insufficient clamping force. Therefore, it is recommended that the nut should not be reused more than two times.     

Real-time empirical NO<Subscript>x</Subscript> model based on In-cylinder pressure measurements for light-duty diesel engines

This paper proposes a real-time empirical model of NO_x emissions for diesel engines. The proposed model predicts the level of NO_x emissions using an empirical model developed based on the thermal NO formation mechanism, the extended Zeldovich mechanism. Since it is difficult to consider the exact physical NO formation phenomena in real-time applications, the proposed algorithm adapts the key factors of the NO formation mechanism from the extended Zeldovich mechanism: temperature of the burned gas, concentration of the gas species, and combustion duration where NO is generated. These factors are considered in a prediction model as four parameters: exhaust gas recirculation rate (EGR rate), crank angle location of 50 % of mass fraction burned (MFB50), exhaust lambda value, and combustion acceleration. The proposed prediction model is validated with various steady engine experiments that showed a high linear correlation with the NO_x emission measured by a NO_x sensor. Furthermore, it is also validated for transient experiments.