Capacitated maximum covering location models: Formulations and solution procedures

This paper presents two formulations and two solution procedures for a capacitated maximum covering location problem. In the first formulation, the problem is presented as a mixed-interger linear programming model which maximizes covered demand. In the second model, the objective function maximizes the weighted covered demand while at the same time minimizing the average distance from the uncovered demands to the located facilities. The second formulation attempts to account for the assignment of the demand which is not “covered” to located facilities which have excess capacity. This assignment is very important, especially for locating emergency service facilities. Two heuristic procedures are proposed to solve these models. These are based on greedy adding technique and Lagrangian relaxation. At each iteration, the demands are allocated to the facilities using an out-of-kilter method. The performance of the solution techniques are compared to the optimal solutions in a variety of test problems.     

Occupant injury risk analysis at NASS/CDS database

Injury information for vehicle occupants from the body regions of the head, thorax, abdomen, and upper and lower extremities, due to the restraints and interior parts of the vehicle, were extracted from the 2009 ~ 2012 NASS/CDS database. For those cases with high occurrence frequency, a detailed and comprehensive data analysis was performed to find the relationship between the accident, occupant, vehicle, and injury data. A numerical frontal impact sled model with the Hybrid III dummy and the GHBMC human body model was constructed to simulate and identify those injury risks according to NASS/CDS. Among the 5,734 injuries to the aforementioned body regions from frontal crashes are, listed by frequency of occurrence, the lower extremity (27.8 %), upper extremity (21.3 %), thorax (15.1 %), face (10.9 %), spine (8.7 %), head (7.3 %), and abdomen (6.9 %). The main injury sources to the head were the windshield, side structure, and steering wheel. For the thorax and abdomen they were the seat belt and steering wheel. For the lower extremity it was the instrument panel. The main injury patterns for the head were the concussion and the contusion. For the thorax they were vessel laceration and lung contusion. For the abdomen they were laceration and contusion of the organs. For the lower extremity they were bone fracture and ligament rupture. The steering wheel and seat positions were main factors affecting head and thorax injury risks. From the sled impact simulation, high injury risks of the head and thorax were assessed respectively at conditions of steering column tilt down and rear most seat position, which correlated well with the findings from the NASS/CDS data analysis.     

The effectiveness of a European speed limit versus an international bunker-levy to reduce CO2 emissions from container shipping

In the fight to reduce CO₂ emissions from international shipping, a bunker-levy is currently under consideration at the International Maritime Organization (IMO). Faced with the inability of the IMO to reach an agreement in the short term, the European Commission is now contemplating a unilateral measure of a speed limit for all ships entering European Union (EU) ports. This paper argues that this measure is counterproductive for two reasons. Firstly, because it may ultimately generate more emissions and incur a cost per ton of CO₂ which is more than society is willing to pay. Secondly, because it is sub-optimal compared to results obtained if an international bunker-levy was to be implemented. These elements are illustrated using two direct transatlantic services operated in 2010.     

Modeling adoption timing of autonomous vehicles: innovation diffusion approach

Autonomous vehicles (AVs) are expected to act as an economically-disruptive transportation technology offering several benefits to the society and causing significant changes in travel behavior and network performance. However, one of the critical issues that policymakers are facing is the absence of a sound estimation of their market penetration. This study is an effort to quantify the effect of different drivers on the adoption timing of AVs. To this end, we develop an innovation diffusion model in which individuals’ propensities to adopt a new technology such as AVs takes influence from a desire to innovate and a need to imitate the rest of the society. It also captures various sources of inter-personal heterogeneity. We found that conditional on our assumptions regarding the changes in market price of AVs over time, their market penetration in our study region (Chicago metropolitan area) will eventually reach 71.3%. Further, model estimation results show that a wide range of socio-demographic factors, travel pattern indicators, technology awareness, and perceptions of AVs are influential in people’s AV adoption timing decision. For instance, frequent long-distance travelers are found to make the adoption decision more innovatively while those who have experienced an accident in their lifetime are found to be more influenced by word of mouth.     

Response spectrum method for extreme wave loading with higher order components of drag force

Response spectra of fixed offshore structures impacted by extreme waves are investigated based on the higher order components of the nonlinear drag force. In this way, steel jacket platforms are simplified as a mass attached to a light cantilever cylinder and their corresponding deformation response spectra are estimated by utilizing a generalized single degree of freedom system. Based on the wave data recorded in the Persian Gulf region, extreme wave loading conditions corresponding to different return periods are exerted on the offshore structures. Accordingly, the effect of the higher order components of the drag force is considered and compared to the linearized state for different sea surface levels. When the fundamental period of the offshore structure is about one third of the main period of wave loading, the results indicate the linearized drag term is not capable of achieving a reliable deformation response spectrum.     

Workspace analysis to generate a collision-free torch path for a ship welding robot

We propose a method to determine the optimal initial location and to generate torch paths for a ship welding robot with 6 degrees of freedom (DOF). The optimal initial location is determined using an objective function, which is set up by combining constraints on the torch posture, manipulability, and the range of each joint angle to avoid collisions. A genetic algorithm (GA) is used to optimize the objective function because it does not require additional derivatives. After the initial location is determined, torch paths are generated by interpolating the starting point, endpoints and torch postures using inverse kinematics. Our method can be applied to automate the welding job for each block during ship building, irrespective of the shape of the robots, by changing the objective function.     

A time‐staged multi‐objective network‐design model

A multi‐objective, time‐staged network‐design problem is formulated. Through transformation, the problem is decomposed into a set of single‐period, single‐objective problems. Lexicographic ordering is instrumental in effecting this transformation; it also allows a backward‐recursion algorithm to be applied using strong pruning criteria. Furthermore, monotonicity properties enable us to solve the problem using the familiar tree‐search algorithms. The solution method has several desirable properties — as shown by an example and a case study of Tripoli Province, Libya. First, the algorithm ensures continuity of project implementation over the multi time‐periods and provides optimality in later computational stages irrespective of the decision at an interim stage. Second, the algorithm tends to provide accessibility to unconnected regions in the study area at low user‐cost without employing weights to the two objective functions of accessibility and user‐cost efficiency. Such a property is deemed advantageous for suggesting transportation investments based purely on purchasing the greatest benefit for each dollar, with political neutrality strictly maintained.     

Impacts of freeway speed limit on operation speed of adjacent arterial roads

Speed limit is one of the essential factors associated with roadway safety. Spillover effect is the tendency of drivers to drive at a higher speed on relatively lower-speed non-freeway roadways after exiting higher-speed freeways. Speed studies were conducted on urban arterial roads with speed limits of 45 mph - all adjacent to freeways with speed limits of 55 mph and 70 mph. A comparison of speed differences between motorists who exited the freeway and those who were already driving on the arterial road was performed. Results showed that the mean speed and 85th percentile of passenger cars on arterials adjacent to 55 mph freeway were 47.3 and 51.1 mph, respectively, while the mean speed and 85th percentile of passenger cars on arterial adjacent to a higher speed 70 mph freeway were 49.5 and 53.4 mph, respectively. Differences in the mean speeds between vehicles exiting from freeways and vehicles already driving on the arterial road were observed at all four sites evaluated. This paper provides researchers, policymakers, and engineers with a better understanding of the effects of speed spillover on adjacent roads when determining whether to increase the speed limit on freeways.     

Deflection test and transmission error measurement to identify hypoid gear whine noise

T-Hypoid gears are commonly used in rear-drive and 4WD (4 Wheel Drive) vehicle axles. Investigating their sensitivity to deflections is one of the most important aspects of their design and optimization procedures. Therefore, a deflection test was performed in this study in the actual gear mounting using completely processed gear. This test covered the full operating range of gear loads from “no load” to “peak load”. Under peak load, the contact pattern extended to the tooth boundaries without showing a concentration of the contact pattern at any point on the tooth surface. The transmission error was tested under an axle assembly triaxial-real-car-load condition.     

Women’s mode and trip structure choices in daily activity-travel: a developing country perspective

ABSTRACT

In this paper, we analyze the travel patterns of Iranian women, where typical patriarchal views and specific social and cultural norms may differ from the patterns of those in western societies. In addition to inherent psycho-physical gender differences, women in Iran can face special constraints forcing them not to be involved in all activity-travel patterns that people in developed countries usually undertake. We pay special attention to the role of marital and employment status on women’s activity-travel patterns. To this end, we develop a joint mode and daily activity pattern (DAP) discrete choice model, which is a two-level mixed nested Logit. The upper nest of the proposed model embodies women’s DAP choices, and the lower nest belongs to the mode choices. In this paper, we try to show how different factors in a patriarchal Muslim society like Iran affect or restrict women’s type and structure of activity-travel patterns.