浅析电喷汽车的宽量程氧传感器

，普通氧传感器的缺陷普通氧传感器一般有4根线，其中2根是加热线，第3根是信号线，另1根是接地线。它是在陶瓷体两侧附着二氧化错涂层，在350℃或更高的温度下能传导氧离子，传感器两侧氧气的浓度差使两个表面之间产生电位差，且工作曲线非常陡峭，混合气在接近理论空燃比时，     

有机醇盐Sol—Gel法纳米ZrO2粉体制备及性能研究

以自制的异丙醇锆为原料，采用Sol-Gel方法制备了氧化锆纳米粉体，通过TG－DTA、XRD及TEM等分析手段研究了粉体的性能与结构，研究结构表明：300℃前煅烧的粉体呈无定型结构，500℃煅烧后粉体呈四方晶型，800℃煅烧后四方态全部转化单斜态，氧化锆粉体形貌在热处理过程中经历了由胶团结构→球形结构→哑铃型结构→多边形结构的变化，纳米粉体的存在温度为800℃左右，高于此温度粉体发生烧结。     

La0.7Sr0.3Co0.3Fe0.7O3纳米纤维的合成及其NO气敏特性研究

用简单有效的静电纺丝法合成了La0.7Sr0.3Co0.3Fe0.7O3纳米纤维材料,并采用X-射线衍射和扫描电子显微镜对其晶体结构和形貌进行表征.结果显示,合成纤维的直径在150～ 300nm之间,长度达到几十个微米.以钇稳氧化锆为固体电解质,合成的La0.7Sr0.3Co0.3Fe0.7O3纳米纤维材料为感测电极,...     

浅析汽车氧传感器

一、氧传感器的作用上世纪90年代,汽车排放污染已日渐成为人们关注的热门话题。随着我国汽车排放法规的逐步规范和社会对汽车排放污染物控制的重视,电喷发动机在我国开始普及。经过近二十年的发展,电喷发动机技术已日益成熟,而汽车排放污染也得到了逐步控制,这都和发动机上一个重要的部件——氧传感器密不可分。确切地说,电喷发动机采用了混合气成分的闭环控制和三元催化反     

Fabrication and Interfacial Structure of Ni-YSZ-LSM Porous Scaffold for Solid Oxide Fuel Cells

A novel process route using tape casting and stacking for fabricating porous scaffold of solid oxide fuel cells (SOFC) was demonstrated. The linear shrinkages of anode (Ni-YSZ, YSZ stands for 3% Y_2O_3(mole fraction) stabilized ZrO_2) and cathode (LSM-YSZ, LSM stands for La_(0.8)Sr_(0.2)Mn0_3) were optimized to be uniform with that of electrolyte during sintering, by controlling the content of pore former. The micromorphology and interface microstructure of the cross-section of the porous scaffold were observed by optical microscope and scanning electron microscope, respectively. The element distribution and phase composition were analyzed by energy dispersive spectrometer and X-ray diffraction, respectively. The results showed that the porous scaffold with regular pore shape and high specific surface area was obtained after sintering at 1 350℃. The fabricated porous scaffold had defect free interfacial structures due to the uniform shrinkage of anode, cathode and electrolyte layers. In addition, it was shown that diffusions of Zr, Ni and La caused a progressive boundary between YSZ, Ni-YSZ and LSM-YSZ layers. The interface between anode and electrolyte (Ni-YSZ/YSZ) was mainly composed of Ni, YSZ and a small amount of NiO, and the interface between cathode and electrolyte (LSM-YSZ/YSZ) was mainly composed of YSZ, LSM and a small amount of La_2Zr_2O_7.     

宽量程氧传感器的应用

传统的氧化锆氧传感器(两状态)是在陶瓷体两侧附着二氧化锆涂层。一端开口，一端封闭。传感器的陶瓷材料在350℃或更高的温度下能传导氧离子，传感器两侧氧气的浓度差使两个表面之间产生电位差，这个电位差可作为传感器两侧氧浓度变化的指标。电极两侧的电压差可在100mv～950mv之间变化，其结构如图1所示。     

氧化锆氧探头原理及其在热处理炉中的应用

综述了氧化锆氧探头的材料、工作原理和在热处理炉气氛控制方面的应用，并介绍了国产氧探头的开发情况。     

ZrO2凝胶块的制备方法及影响因素

介绍了制备ＺｒＯ２凝胶块的两条途径：物理途径及化学途径，详细叙述了三种ＺｒＯ２凝胶块的制备方法，并对ＺｒＯ２凝胶块形成过程中主要影响因素水、醇盐摩尔比、酸的种类及ｐＨ值进行了综合评述。