铁路桥梁施工中冲击钻灌注桩质量控制分析

在铁路桥梁工程不断发展的过程中,冲击钻灌注桩技术的运用越来越广泛,是一项关键的工程桩基技术,在实际施工过程中技术工艺相对烦琐,存在很多干扰因素,很容易出现成桩质量差的问题,影响整体工程质量。以某铁路桥梁施工项目为例,对冲击钻灌注桩施工工艺流程进行分析,研究铁路桥梁施工中冲击钻灌注桩质量控制要点,以有效改善冲击钻灌注桩成桩质量,提高铁路桥梁工程质量。     

叉峰特长隧道快速施工技术

浙江省诸永高速公路双峰特长隧道进口通过优化通风方案、改善通讯条件,采用常规机械及传统钻爆法快速施工,取得了较好成效。对隧道施工中所采取的施工组织管理、施工方案及技术措施等进行介绍,可为特长隧道快速施工积累一些方法和经验。     

铁路通信信号电源视频监控技术的应用及分析

结合工程实际,对铁路通信信号电源视频监控系统进行了全面介绍和分析,对工程中存在的问题通过试验分析得出针对性的解决方案,并就铁路电力视频监控技术的发展进行有益的探讨。     

Investigation of tailpipe and evaporative emissions from China IV and Tier 2 passenger vehicles with different gasolines

The limited understanding of vehicular emissions in China, especially evaporative emissions, is one obstacle to establishing tighter standards. To evaluate tailpipe and evaporative emissions, two typical China IV vehicles and one Tier 2 vehicle with an onboard refuelling vapour recovery (ORVR) system were selected and tested. One of the China IV vehicles was fuelled with gasoline, E10 and M15, respectively, to investigate the effect of fuel properties on vehicular emissions. For each vehicle, cold-start tailpipe emission tests were conducted first, followed by an evaporation test. Based on the emission factors and real-world vehicle activity data, the annual tailpipe and evaporative hydrocarbon (HC) emissions of each vehicle were calculated and compared. The results show that E10 and M15 significantly reduced the tailpipe CO and particle number (PN) emissions but seriously aggravated the NOx emissions, especially for M15. The hot soak losses (HSLs) and diurnal breathing losses (DBLs) were slightly impacted by the fuel properties. The annual evaporative emissions with E10 and M15 were higher than that with gasoline. The ORVR system effectively controlled the evaporative emissions, especially for DBLs. Evaporative emissions from the China IV vehicles were 1.1–1.4 times the tailpipe HC emissions. Additionally, the evaporative emission factors of the China IV vehicles were almost 50% lower than the standard (2.0 g/test), whereas their annual evaporative emissions were almost 1.8–2.8 times higher than those from the Tier 2 vehicle. Therefore, controlling evaporative emissions currently remains a great need in China, and the ORVR might be a recommended evaporative control technology.     

Estimation of extreme significant wave heights and the associated uncertainties: A case study using NORA10 hindcast data for the Barents Sea

The reliability of an offshore structure is dependent on its response to the extreme wave climate; therefore, an adequate knowledge of the wave climate at a location is a prerequisite during design as well as in marine operations. This study aims to contribute to the knowledge of the extreme wave climate in the Norwegian Sector of the Barents Sea, using wave hindcast datasets from the Norwegian Reanalysis 10 km (NORA10) database for four locations.We have considered three commonly used methods for the estimation of extreme wave heights, that is, the initial distribution method, the peak over threshold method, and the annual maxima method. The parametric bootstrap concept is considered in the estimation of the epistemic uncertainty related to sample size. The estimated 100-year significant wave heights obtained from the three methods differ, and the degree of variability in the estimates varies, depending on the dataset. The epistemic uncertainty due to sample size is wider when considering the annual maxima method.The estimates obtained from the three methods show the importance of considering different methods and their associated uncertainties when estimating extreme wave values for design. While it is difficult to single out the best method among the three, the estimated values give knowledge of the possible range of the extreme significant wave heights at the locations. Generally, the datasets considered in this study suggest that the wave climate is less harsh further north compared to the southern region of the Barents Sea. The datasets do not suggest any temporal trends in the historical significant wave heights at any of the locations.     

大鼠弥漫性轴索损伤后大脑皮层rab10的表达及意义

目的研究大鼠弥漫性轴索损伤(diffuse axonal injury,DAI)后小G蛋白rab10在大脑皮层的表达变化规律,探讨DAI后rab10在神经修复中的作用及意义。方法采用头颅瞬间旋转损伤装置建立大鼠DAI模型,随机分为1d、3d、7d组及对照组。采用Gless嗜银染色和TUNEL染色分别观察DAI后神经轴索形态和凋亡变化;采用Western blot、免疫组化等方法检测大鼠大脑皮层rab10的分布及表达,并采用免疫荧光双标染色分析大脑皮层神经元内rab10的表达变化。结果嗜银染色显示DAI后1d神经轴索形态损伤最严重,3~7d时损伤逐渐减轻;TUNEL染色显示DAI后1d凋亡细胞数开始升高,3~7d时凋亡数量更高,呈迟发性改变。Western blot及免疫组化结果均提示DAI后1d大脑皮层rab10的表达显著增加,3d后稍降低,7d后明显降低,但仍高于正常(P<0.05);免疫荧光双标染色提示正常神经元内几乎不表达rab10,DAI后神经元内rab10表达在1~3d较高,7d时较前降低。结论大鼠DAI后大脑皮层rab10表达水平先增加,随后降低;神经元内rab10的表达变化可能与DAI后神经轴索修复有关。     

弥漫性轴索损伤后CD4~+/CD8~+ T细胞比值、IL-6、IL-10水平变化及预后相关危险因素的Logistic回归分析

目的研究弥漫性轴索损伤(DAI)后患者外周血CD4+/CD8+T细胞比值及炎症因子IL-6、IL-10水平的变化,探讨影响DAI患者预后的相关危险因素及可能的预测因子。方法收集115例DAI患者的相关临床资料及伤后至少6个月的随访结果,并将采集的患者外周血采用流式细胞仪检测CD4+、CD8+T细胞及其比值,ELISA法检测IL-6、IL-10水平,对免疫炎症指标及临床资料进行单因素和多因素分析,多因素分析采用Logistic回归分析。结果DAI后合并其他脑损伤、瞳孔改变、伤后昏迷时间及入院时GCS评分是影响患者预后的危险因素,而其他因素则与预后不相关。CD4+/CD8+T淋巴细胞比值降低是DAI后发生ARDS/ALI的危险因素,CD4+/CD8+T淋巴细胞比值与患者预后关系不大,而ARDS/ALI的发生则是影响DAI患者预后的重要危险因素。IL-6增加与DAI后ARDS/ALI密切相关,可作为ARDS/ALI发生的预测因子,其水平是患者预后的危险因素,而IL-10则在此过程中与ARDS/ALI不相关,且与患者预后无关。结论 CD4+/CD8+T淋巴细胞比值降低是DAI后发生ARDS/ALI的危险因素,IL-6可作为ARDS/ALI发生的预测因子。DAI后与患者预后相关的危险因素包括合并其他脑损伤、瞳孔改变、伤后昏迷时间、入院时GCS评分、IL-6水平及并发ARDS/ALI。     

α-干扰素对慢性粒细胞白血病来源的树突状细胞的免疫调节作用(Ⅰ)

目的　于慢性粒细胞白血病 (CML)来源的树突状细胞 (DCs)无血清培养基中 ,加入α 干扰素 (IFN α) ,以探讨IFN α对CML DCs表达共刺激分子及分泌IL 10、IL 12P70的影响。方法　在诱导CML DCs的培养基中 ,除加入SCF、GM CSF、TNF α及IL 4外 ,还加入不同浓度IFN α。培养 10～ 14d后 ,流式细胞仪检测细胞免疫表型 ;G显带法显示Ph1染色体 ;噻唑蓝 (MTT)法检测CML DCs刺激正常人外周血淋巴细胞增殖状况 ;ELISA法检测培养上清IL 10及IL 12P70含量。结果　IFN α(30 0U·mL-1)组较无IFN α组 ,CML DCs的CD4 0、CD83、CD86及MHC I类抗原的表达均升高一倍 ;异体混合淋巴细胞反应 (MLR)中OD值增加一倍 ;Ph1染色体阳性比例、IL 10及IL 12P70浓度均减低。结论　IFN α能够部分纠正CML DCs免疫表型及功能缺陷 ,同其解除了CML血清中IL 10对CML DCs分化的抑制有关     

STCW78/10公约对航海技术专业人才培养的影响及对策

在概述STCW78/10公约对航海技术专业人才培养产生较大影响的基础上,本文介绍了我国履约的准备情况,提出航海技术专业人才培养应从培养模式、培养途径、培养规格、课程体系和教学手段与方法五个方面进行调整和改革的措施,以应对公约修改对航海人才培养的影响.     

铁路隧道使用凿岩台车与风钻钻爆的比较研究

为进一步分析研究高铁隧道凿岩台车与风钻钻爆的优劣及适用性问题,以郑万高铁小三峡隧道工程为依托,介绍风钻钻爆 的施工应用情况及凿岩台车钻爆在施工应用方面的制约因素,并从施工工效、人员配置、安全性、超欠挖控制、成本投入等方面对比 分析。 主要研究结论如下: 1)采用凿岩台车钻爆,在硬岩条件下钻爆速度较快,Ⅲ、Ⅳ级围岩可通过工法调整来提高凿岩台车的施 工效率,遇软弱围岩时应慎重选用; 2)凿岩台车钻爆与风钻钻爆相比,劳动强度低、节省劳动力、安全风险小等方面具有突出成效; 3)理论分析凿岩台车钻爆较风钻钻爆平均线性超挖小,但实际施工过程中却反之,可通过加强管理来缩小与人工钻爆之间的超挖 差距; 4)凿岩台车对风钻钻爆的优势显而易见,随着隧道施工机械化进程不断地发展,将来一段时间凿岩台车钻爆替代风钻钻爆 施工是未来地下工程开挖的发展方向之一。