Use of localized necking and fracture as a failure criterion in ship collision analysis

This study explores the use of localized necking for failure modeling in maritime crash analysis, using large shell elements. The assumption that the failure of a large shell element occurs simultaneously with the onset of localized necking is revisited. This study particularly investigates the numerical implementation of the localized necking condition and its implications on the results of ship collision analysis involving not only plate rupture but also various failure mechanisms such as the crushing and tearing of web girders, stringers, and their intersections. Through a series of large-scale collision simulations, the effects of bending deformation on the initiation of necking, non-proportional loading paths, and ductile fractures not preceded by localized necking, are investigated. It is demonstrated that a localized necking-based fracture model provides a reasonable, relatively mesh-insensitive estimate of the onset of fracture in the outer hull panels; however, fracture propagation is very sensitive to the numerical implementation of the necking and fracture model, especially for the cases involving the crushing of web frames and stringers.     

微机控制的船用发电机继电保护实验装置

由于微机控制的继电保护与常规保护比较起来有许多优点,因此微机控制的船用发电机继电保护实验装置有其取代原有实验装置的必要性。本文就微机控制的船用发电机继电保护实验装置的硬件结构、软件算法和软件抗干扰技术进行了探讨。     

牙周炎患者红细胞免疫功能及发病机理研究

采用酵母菌花环试验对31例牙周炎患者红细胞免疫粘附功能、循环免疫复合物、补体C_3含量进行了检测,并与正常组进行了比较。结果显示:牙周炎患者红细胞膜免疫复合物及循环免疫复合物均升高,补体C_3含量降低,且皆与正常组有显著性差异。作者认为:免疫复合物在牙周炎发病机理中有一定的意义,牙周炎患者红细胞免疫对清除循环免疫复合物起着重要作用。     

Experimental ivnestigation on flow fields of viscous fluid around two-dimensional wings and comparison with computational results

To examine the flow field of a viscous fluid around the trailing edge of a wing with respect to the Kutta condition or the Joukowski hypothesis, an experimental investigation into the velocity fields around two-dimensional (2D) wings NACA0012 and NACA4412 was carried out using an X-type hot-wire anemometer in a wind tunnel and the method of colored milk injection in a circulating water channel. The results of these investigations revealed that the flow of a viscous fluid at the trailing edge of a 2D wing is tangential to the face on the pressure side, and that the flow is very slow or reversed on the suction side due to separation when the angle of attack is greater than 7.5°. By flow visualization, a Kármán vortex street was found in the wake of both wings (NACA0012 and NACA4412) when the angle of attack was 5°. These results show that the ordinary Kutta condition with respect to the direction of outflow at the trailing edge is not necessarily satisfied in a viscous fluid, but the Kutta condition with respect to the pressure at the trailing edge is satisfied as usual. Numerical results, which have been obtained as the solution of Reynolds-averaged Navier-Stokes equations, show good agreement with above-mentioned experimental results. Therefore, CFD (Computational Fluid Dynamics) simulation has proved to be very effective for studying steady viscous flow around the trailing edge of a 2D wing.     

直流牵引变电所在供电系统运行仿真中的建模

讨论了直流牵引变电所在供电系统运行仿真中的建模问题。直流牵引变电所主要由整流变压器和硅整流器构成。在进行直流牵引供电系统的运行仿真时,将其按戴维南电路建模,其等效内电阻和理想电压源由交流电源和整流机组的参数以及负载情况决定。本文给出了12脉波整流机组的计算实例。     

VANTAGE PDMS在WZ11—1平台详细设计中的应用

主要介绍中国海洋石油西部分公司WZ11．1平台的特点及VANTAGE PDMS三维设计软件在该平台详细设计中的成功应用。     

转臂轴箱定位节点位置对机车动力学性能影响分析

利用SIMPACK建立某出口2B0机车动力学模型,分析了转臂轴箱定位节点的纵向位置对机车动力学性能的影响.研究表明节点纵向位置对机车横向稳定性有较显著影响,而对机车直线和曲线通过性能影响不大.得出了在动力学模型中,需要把转臂作为一个单独元件考虑,以减小计算误差的结论.     

远洋轮机模拟器生活冷库建模技术

通过对远洋轮机模拟器生活冷库建模过程，介绍了实时仿真建模技术的概念，说明了实时仿真建模的方法和特点。     

超高速实验车驱动方案设计及优化

研究速度在400-1000km／h的超高速实验车重接式电磁驱动方案,讨论重接式电磁驱动的电路结构和运动方程。在Maxwell3D瞬态场中搭建了驱动系统仿真模型,分析不同初始速度下,三级驱动系统受力特性和加速规律。针对系统运动特性和效率问题,提出驱动电路优化方案,使得发射体运动特性改善、效率提高。仿真结果表明：通过合理分配驱动单元,应用重接式电磁驱动的超高速实验车,可在短时间内被加速达到超高速的目标。     

CRH_3型高速动车组整流器预测电流控制仿真研究

对CRH3型高速动车组牵引传动系统采用的四象限整流器,在分析了其基本原理及其控制策略的基础上,利用Matlab/Simulink建立了一种基于预测电流控制方法的四象限脉冲整流器的仿真模型。仿真结果表明,预测电流控制方法可以保持中间直流环节电压的稳定输出,实现调压稳压的功能,并且网侧功率因数近似等于1,谐波含量较小。