迈腾B8电动后视镜控制系统的检测方法

鉴于现代轿电动后视镜控制系统功能繁多、结构复杂,故障排除难度较大。以迈腾B8电动后视镜控制系统为研究对象,通过分析其线路图工作原理,进而重点分析了后视镜转换开关EX11信号的检测信号和后视镜左右调节电动机V17控制电路的工作过程、常见故障与检测方法。结果表明:通过该检测方法能够有效地排查出该控制系统常见故障,并能够为其他车型控制系统提供规律性参考。     

水下航行体操纵性指数与频率特性计算

本文根据水下航行体的侧-滚运动方程组，经拉普拉斯变换，求解了运动参数的传递函数；并用时域分析法与频率分析法，给出了四阶系统的操纵性指数K，T计算方法与频率特性的计算方法及其算例，以判别航行体的侧向、横滚方向运动的稳定性与机动性。     

Driver steering and muscle activity during a lane-change manoeuvre

The article reports an experimental study of driver steering control behaviour in a lane-change manoeuvre. Eight test subjects were instrumented with electromyography to measure muscle activation and co-contraction. Each subject completed 30 lane-change manoeuvres with one vehicle on a fixed-base driving simulator. For each driver, the steering torque feedback characteristic was changed after every ten manoeuvres; the response of the vehicle to steering angle inputs was not changed. Drivers' control strategies were found to be robust to changes in steering torque feedback. Path-following errors, muscle activity and muscle co-contraction all reduce with the number of lane-changes performed by the driver, suggesting the existence of a learning process. Comparing the test subjects, there was some evidence that high levels of co-contraction were used to allow high-frequency steering inputs to be generated. The results contribute to the understanding of vehicle-driver (and more generally, human-machine) dynamic interaction.     

模糊控制变增益在曲柄箱油雾浓度检测系统中的应用

由于曲柄箱油雾浓度变化范围很大，在计算机控制系统中，必须根据油雾浓度变化而改变增益，以保证A／D转换精度，本文介绍了采用模糊算法控制增益的方法。     

Structural Characteristics and Mechanical Properties of Rock Mass in the Field of Tianwan Nuclear Power Plant, China

Introduction The project of Tianwan Nuclear Power Plant,located in Pashan, at the south foot of HouyuntaiMount, northeast of Lianyungang City, JiangsuProvince, is entitled State Key Project in collabo-ration with Russia. This project is carried out atthree phases, with two reactors to be built at eachphase. Important constructions such as the nuclearislets and the normal islets are all situated at thebedrock zone. With regard to the field study of thenuclear power plant, the authors have…     

舰船全电力推进系统模拟研究

介绍了舰船全电力推进系统的优点、典型国外电力推进系统和我校建 船舰电力推进模拟研究系统的组成及其工作原理。重点研究了螺旋奖负载模拟装置的硬件组成、相关的计算及控制方法。在此基础上，对采用电力推进舰船的运动进行了半物理仿真，取得了较好的效果。     

无刷直流推进电动机动态性能的仿真

建立无刷直流推进电动机的动态仿真数学模型,利用系统矩阵的特征值和特征向量,以及对称性边界条件确定初始状态,对起动等动态过程进行了仿真和分析。仿真结果对于船舶永磁同步推进系统的设计具有重要的指导意义。     

一种新型的主机调速系统

针对全回转舵桨汽车渡船，提出了一种新型的主机气控调速系统，并对其工作原理、调速方法及调压阀设计作了简要分析。     

202kW玻璃钢拖网渔船电气设计

简要介绍２０２ｋＷ玻璃钢拖网渔船的总体结构和主要技术参数，并就船电设计有关的电制、电站、配电、动力、报警装置、防无线电干扰措施、避雷、接地保护、电缆选用、无线电通信、导航、助渔设备配备等问题作了系统阐述。     

动力及环境集中监控系统建设的思考

简要分析了铁通城域网现状，提出城域网动力环监系统的建设原则，并针对采集、传输与组网技术以及后期的运用问题进行了分析与思考。