轮印载荷下I型夹层板架结构静强度力学性能试验研究

现代舰船的直升机起降时会通过轮胎将载荷作用于飞行甲板的板架上,这种载荷通常被称为轮印载荷。除此之外,相对于传统加筋板结构形式,I型夹层结构具有轻质、高比强度等优点,是一种可以应用于船舶飞行甲板的新型结构形式。本文针对轮印载荷局部重载和位置不确定的特点,设计了合理的试验贴片方案及加载程序,并将试验数据与理论值对比,分析误差原因,研究I型夹层板架结构的板格在四种典型位置轮印载荷作用下的静强度力学性能。试验结果表明,夹层板架结构在载荷附近测点的应力水平较大,同时其上面板沿船宽方向的弯曲应力大于沿船长方向的弯曲应力,而下面板2个方向的弯曲应力特性与上面板相反。这些结论对于I型夹层板架结构在轮印载荷下的力学性能研究具有重要意义。     

On the importance of mooring system parametrisation for accurate floating structure designs

This paper analyses the importance of mooring design parametrisation on the dynamic behaviour of mooring loads. An exhaustive sensitivity analysis is performed to evaluate the variability of mooring loads because of inaccuracies in the definition of model inputs, including physical and numerical parameters. Results show a relevant dependence on the length and significance in other parameters, such as the weight together with the hydrodynamic equivalent diameter and the drag forces. An inaccuracy below 1% in the mooring reference length can generate loads of up to twice the design, and an incorrect definition of the weight or the drag coefficient in the mooring design can lead to a design load variability of up to 30%. Stiffness plays a crucial role in snap events, reaching load differences of 19% depending on the stiffness selected.This research is based on a set of numerical models capable of predicting the mooring system response. A dynamic numerical model with two schemes of resolution is implemented and calibrated according to an experimental test campaign. Other sources of results provided by a quasi-static model and commercial software, Sesam (DNV-GL), are incorporated. In general, the dynamic numerical models show a good accuracy with an experimental database composed by a set of 2D prescribed movement tests at the fairlead of the mooring system.     

浅谈询问调查

询问调查与海事工作关系十分密切,水上交通事故和海事行政处罚案件的调查取证都离不开询问调查,本文从询问前、询问过程和询问后三个方面谈了询问调查的一些方法和技巧。     

铁路桥梁用超细粉煤灰高性能混凝土的试验研究

我国铁路桥梁工程建设中较少掺用粉煤灰,但粉煤灰混凝土在其他工程领域的应用已经证明其具有优良的耐久性能及长期性能。在本文研究中,突破现行规范,从材性试验的角度以30%左右的超细粉煤灰(UFA)等量取代水泥配制了铁路桥梁用的超细粉煤灰高性能混凝土,并对其力学性能、部分长期性能、水化产物以及水泥石形貌等进行了试验研究。试验结果表明,混凝土早期强度主要取决于W/C和UFA掺量,而后期则主要取决于W/B和UFA掺量;通过应力-应变全曲线分析可知,UFA高性能混凝土可采用现行规范设计;混凝土干缩、抗渗、抗裂性能等均优于基准混凝土;同时在微观测试分析基础上,综合考虑施工及养护条件等因素的变异,认为在实际应用中,UFA掺量以不超过30%为宜。     

梯形轨道系统动力特性及减振效果试验研究

采用锤击法,对梯形轨道系统(简称梯轨)进行动力特性试验。利用变时基传递函数细化分析方法,解决力信号时域波形精度与加速度信号频率分辨率之间的矛盾,提高低频脉冲频响分析精度。根据锤头材料的锤击特性和试验研究的频率范围,分别选择尼龙和钢制锤头进行梯轨模态和减振特性试验研究。结果表明:梯轨的低阶模态分布比较密集,基频为48.6Hz,前3阶模态的阻尼比较高,1阶阻尼比最大,达到6.64%;梯轨的工作频率约为50Hz,在梯轨工作频率之上1/3倍频程中心频率处,传递损失不随锤击力的大小而变化,梯轨的振动衰减系数为常数;梯轨具有较高的减振作用,在0～1000Hz频段传递损失在45dB左右。     

异形变截面多室曲线箱梁桥的试验研究及三维有限元分析

在对某异形变截面多室曲线箱梁桥试验研究的基础上,构造可以综合考虑拉压、弯扭、畸变、剪力滞及其耦合作用的三维虚拟层合单元法,并对该异形桥梁进行空间有限元分析。理论分析和试验研究表明,利用此法对这种复杂的异形桥梁结构进行空间分析,具有模型单元少、计算效率和精度高的特点,完全可以满足实际工程的需要,是一种简单方便的实用计算方法。最后,综合考虑在一期恒载和纵向预应力筋作用下其应力的空间分布情况。研究成果可供工程设计和施工参考。     

利用模态参数对轮胎纯侧偏特性建模

在轮胎静生趣特怀建模的基础上，探讨了利用轮胎模态参数对轮胎纯侧偏特性的建模。通过侧向激振试验提取了轮胎的侧向模态参数并计算了轮胎在不同载荷下的偏离特性，计算结果与以往轮胎的试验结果具有很好的一致性。计算结果转化为无量纲形式并与经验模型进行了比较，建模和计算结果充分说明了模型的合理并显示了建模方法的优越性。     

山区漫水桥梁水毁调查分析及重建设计

重点阐述在涞水县7.21灾后公路恢复重建中，对桥梁水毁状况的调查分析以及工程重建设计要点，可为相关工作提供借鉴。     

Detection of nonlinearity effects in structural integrity monitoring methods for offshore jacket-type structures based on principal component analysis

The detection of changes in the dynamic behavior of structures is an important issue in structural safety assessment. The development of detection methods assumes greater significance in the case of offshore platforms because the inherent problems are compounded by the harsh environment. Here, we describe an instrumented physical model for the structural health monitoring of an offshore jacket-type structure and the results of tests in several different damage scenarios. In a comparative investigation of two different methods, we discuss the difficulties of implementing damage detection techniques for complex structures, such as offshore platforms. The combined algorithm of a fuzzy logic system and a model updating method are briefly discussed, and a method based on stochastic autoregressive moving average with exogenous input is adopted for the structure. The consideration of uncertainties and the effects of nonlinearity were major objectives. So, the methods were also investigated based on the test scenarios consisting of the physical model with a geometric nonlinearity. The principal component analysis method was utilized for the detection of nonlinearity in the recorded data. The results show that the developed methods are suitable for damage classification, but the quality of the acquired signals must be considered an important factor influencing successful classification. The development of these methods may be extremely useful, as such technologies could be applied for offshore platforms in service, enabling damage detection with fewer false alarms.     

乌鲁木齐市中心城区常规公交乘客满意度研究

乌鲁木齐市中心城区交通日趋拥堵,优先发展公共交通是缓解城市交通拥堵,改善城市交通环境的主要措施。乌鲁木齐市的公共交通主要包括公共汽车和出租汽车,通过实地发放调查问卷、数据处理分析及结合乌鲁木齐市目前的实际情况,运用专家咨询法确定32个指标权重,构建基于综合模糊评价法的常规公交车乘客满意度总评价。获得不同评价结果,并提出改善对策,对乌鲁木齐市的未来常规公交发展起到参考作用。