涂层与阴极保护下的管道外腐蚀研究与控制

长期以来 ,一直认为管道在涂层和阴极保护协同保护下不会产生外壁腐蚀或腐蚀轻微。应用第三代高精度智能清管检测器对榕山—佛荫长为 2 5 4km的管线进行检测 ,发现了 455处外壁腐蚀 ,研究结果表明 :管道建设时 ,涂层施工的质量较差 ;使用维护过程中涂层材料老化严重、失修 ;管线上阴极保护系统长期故障使管道欠保护 ;执行了有严重缺陷的行业标准 ,至今不知管线上监测到的保护电位距真实的极化电位的差距有多大 ;管线的阴极保护度数据难以采集到。针对上述问题提出了控制腐蚀的方法。     

软岩边坡加固中锚索预应力变化影响因素分析

预应力锚索被广泛应用于边坡加固,并获得了良好的加固效果和经济效益,但针对锚索预应力的影响因素及变化规律的研究还不多见。本文简要分析了预应力锚索的受力形式,结合实际软岩边坡工程,比较分析施工期和雨季中大量的监测数据,详细探讨了边坡在最不利时期中影响预应力变化的主要因素及变化特点。主要包括锚索材料、施工影响及外部因素等,对进一步综合归纳预应力变化的规律及计算模型的确定有一定的参考价值。     

岩土锚固力的确定及应用

选定粤赣高速公路有代表性的6种岩层,对其全、强、弱风化层组成的路堑高边坡锚索加固工程进行了69次破坏性拉拔试验。试验中对每种不同风化程度的岩(土)层采用锚固长度为1m、2m、3m的现场拉拔试验,计算出锚索加固边坡的锚固力值,为验证高边坡工程设计提供了准确的力学参数,也为全线高边坡工程的施工工艺提供指导性意见。同时,节省了大量的试验费用和时间,获得了显著的经济效益。     

Local joint flexibility of tubular X-joints stiffened with external ring or external plates

In the present paper, the Local Joint Flexibility (LJF) of the ring-stiffened X-joints and plate-stiffened X-joints under compressive load is investigated. In the first phase, a finite element (FE) model was generated and verified with the results of available experimental tests and equations. In the next phase, a set number of 234 FE models were created to evaluate the role of the external ring size (β_r and τ_r), the external plate size (β_p and τ_p), and the connection geometry (γ, τ, and β) on the LJF factor (f_LJF). In these FE models, the weld connecting the chord and brace members was generated. The results indicated that the f_LJF of a plate stiffened joint can be down to 76% of the f_LJF of the corresponding un-stiffened joint. Also, the effect of the ring size on the f_LJF was more than the effect of the plate size on the f_LJF, because of the stiffener position. Despite the notable effect of the ring and the plate on the f_LJF, there is not any study or formula on tubular connections stiffened with ring or plate. Therefore, the FE results were used to propose two parametric formulas for determining the f_LJF in X-joints with external ring or external plate under brace compressive load. Moreover, the derived formulas were checked based on the UK DoE acceptance criteria.     

空心板梁预应力体外索加固技术应用

以具体的工程实例为背景,介绍采用法兰螺丝对空心板桥梁施加横向无粘接预应力,加固有纵向裂缝桥梁的基本工作程序及施工要点,为桥梁加固工程提供参考.     

Enhancing stated preference surveys in transportation research: the contribution of geographic information systems

In this paper we argue that visualization, data management and computational capabilities of geographic information systems (GIS) can assist transportation stated preference research in capturing the contextual complexity of many transportation decision environments by providing respondents with maps and other spatial and non-spatial information in graphical form that enhance respondents' understanding of decision scenarios. We explore the multiple inherent contributions of GIS to transportation stated preference data collection and propose a framework for a GIS-based stated preference survey instrument. We also present the design concepts of two survey prototypes and their GIS implementation for a sample travel mode choice problem.     

双壳船内外底结构强度探讨

文章利用“船舶结构力学”原理,对双壳船中的双层底结构进行受力分析,同时结合现行规范,提出较为切合实际的强度计算公式。     

车用减振器的外特性建模与仿真

针对某轿车的弹性阀片和弹簧结合型减振器的结构形式，建立了减振器复原行程开阀前、开阀后及压缩行程的阻尼力力学模型，推导出了减振器阻尼力的计算公式，并通过计算机仿真得出该轿车减振器的模拟工作特性。计算机仿真和生产实践证明，所建立的数学模型是正确的，计算方法也符合实际要求。     

Marginal costs of freeway traffic congestion with on-road pollution exposure externality

The health cost of on-road air pollution exposure is a component of traffic marginal costs that has not previously been assessed. The main objective of this paper is to introduce on-road pollution exposure as an externality of traffic, particularly important during traffic congestion when on-road pollution exposure is highest. Marginal private and external cost equations are developed that include on-road pollution exposure in addition to time, fuel, and pollution emissions components. The marginal external cost of on-road exposure includes terms for the marginal vehicle’s emissions, the increased emissions from all vehicles caused by additional congestion from the marginal vehicle, and the additional exposure duration for all travelers caused by additional congestion from the marginal vehicle. A sensitivity analysis shows that on-road pollution exposure can be a large portion (18%) of marginal social costs of traffic flow near freeway capacity, ranging from 4% to 38% with different exposure parameters. In an optimal pricing scenario, excluding the on-road exposure externality can lead to 6% residual welfare loss because of sub-optimal tolls. While regional pollution generates greater costs in uncongested conditions, on-road exposure comes to dominate health costs on congested freeways because of increased duration and intensity of exposure. The estimated marginal cost and benefit curves indicate a theoretical preference for price controls to address the externality problem. The inclusion of on-road exposure costs reduces the magnitudes of projects required to cover implementation costs for intelligent transportation system (ITS) improvements; the net benefits of road-pricing ITS systems are increased more than the net benefits of ITS traffic flow improvements. When considering distinct vehicle classes, inclusion of on-road exposure costs greatly increases heavy-duty vehicle marginal costs because of their higher emissions rates and greater roadway capacity utilization. Lastly, there are large uncertainties associated with the parameters utilized in the estimation of health outcomes that are a function of travel pollution intensity and duration. More research is needed to develop on-road exposure modeling tools that link repeated short-duration exposure and health outcomes.     

玻璃钢双体快艇艇体结构设计

对玻璃双体快艇艇体结构形式的选择及复合材料设计进行了论证，列出了单，双体双艇船型主要参数及其区别，叙述了艇体的受冲击力特点和纵，横向的分布情况，并介绍了双体快的适用范围及结构设计中需引起重视的问题。