新型零航速矢量减摇系统研究

针对海洋科研平台、科考船等减摇系统的快速响应性工作需求,在螺旋桨推进器基础上开发了一种零航速矢量减摇系统。本文介绍系统机构设计及其工作原理,结合耐波性计算分析获取船舶横摇规律,采用滑台搭载重物往复移动方式,模拟船舶规则横摇以获得规则波实验条件,并通过船模实验验证该减摇装置作用下的船舶横摇减摇效果。零航速规则波模拟实验研究表明,该减摇装置具有可控性强、易改装的特点,能够大幅提高船舶的耐波性,为后续工程试验船舶上安装该减摇系统奠定理论与实验基础。     

ROV attitude control based on multi-motor cooperative propulsion北大核心CSCD

[目的]为了提高遥控水下航行器(ROV)在复杂水下环境中的姿态控制性能,开展多电机协同推进的ROV姿态控制研究。[方法]首先,针对多电机系统的结构和算法,分别提出一种基于PID速度补偿器的偏差耦合结构和一种新型非奇异终端滑模控制(SMC)算法,并设计一种新颖的基于多电机协同推进的ROV姿态控制方法;然后,建立ROV的运动学和动力学模型,开展推进器组推力建模分析、解耦简化ROV动力学模型研究;最后,设计一种ROV滑模姿态控制器。[结果]仿真结果表明,所提的结构和算法可提高多电机系统的抗干扰性、同步性和快速响应能力,进而提高ROV姿态控制系统的稳定性与鲁棒性。[结论]所提方法可为ROV姿态控制提供一种新的可用方案。     

基于可靠性方框图与蒙特卡洛仿真的船舶配电网可靠性分析方法

国船舶工业发展迅速,尤其在近几年迎来了跨越式的发展。船舶建设工业的发展能充分体现一个国家的经济和国防建设水平。但船舶配电网拓扑结构与陆上电网不尽相同,其运行环境非常恶劣,供电连续性和可靠性成为衡量船舶生命力的重要指标,同时也深刻影响大型船舶的平均寿命。因此,可靠性研究在船舶建设中发挥着越来越重要的作用。本研究以典型大型船舶中压配电网结构为研究对象,在全系统元件正常运行时相互独立的情况下,重点研究不可维修与可维修下的系统可靠度、MTBF、可用度、停运时间和失效数等,并进行详细的分析与讨论。首先,本文综合考察各种可靠性分析方法的适用性和准确性,选择利用可靠性框图、最小路集分析法计算并分析不可维修情况下系统的可靠度、平均故障间隔时间等可靠性指标；接着,本文简述了配电网的多种维修任务类型,并采用最小路集法与蒙特卡洛仿真法相结合的方法计算并分析可维修系统的可用度、停电时间、失效数等指标。本文研究结果对船舶配电网的设计、建造、运行和维修等具有积极的意义。     

Economic and ecological optimization of electric bus charging considering variable electricity prices and CO2eq intensities

In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses.In this study, we present a new methodology for optimizing the vehicles’ charging time as a function of the parameters CO_2eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO_2eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle.In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6% compared to charging at a fixed electricity price. The savings potential of CO_2eq emissions is similar, at 14.9%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO_2eq intensity is also low in this period, but midday charging leads to the largest savings in CO_2eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5% CO_2eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.     

Costs of air pollutants from shipping: a meta-regression analysis

ABSTRACT

This study estimated the external cost of air pollution from shipping by means of a meta-regression analysis, which has not been made before. Three pollutants, which were included in most of the primary studies, were considered: nitrogen oxides (NO_x), sulphur dioxides (SO₂) and particulate matters with a diameter of max 2.5 micrometres (PM_2.5). All primary studies included damages of health and a majority added impacts on agriculture and estimated the cost of air pollutants by transferring cost estimates from studies on costs of air emissions from transports in Europe. Different regression models and estimators were used and robust results were found of statistically significant emission elasticities of below one, i.e. total external costs increase by less than 1% when emissions increase by 1%. There was a small variation between the pollutants, with the highest elasticity for PM_2.5 and lowest for NO_x. Calculations of the marginal external cost of the pollutants showed the same pattern, with this cost being approximately six times higher for PM_2.5 than for the other pollutants. Common to all pollutants was that the marginal external cost decreases when emission increases. Another robust result was a significant increase in the cost of studies published in journals compared with other publication outlets. These findings point out some caution when transferring constant external unit cost of air pollutant from shipping, which is much applied in the literature, and the cost functions estimated in this study could thus provide a complementary transfer mechanism.     

兰新高铁甘青段路基冻胀自动监测及分析研究

为查明兰新高铁甘青段路基冻胀变形原因和影响因素,提出相应的冻胀处理措施,将路基冻胀变形控制在允许范围之内,采用自动监测系统,对路肩以下5 m范围内路基的冻结深度、水分、冻胀变形等进行监测,并对监测结果进行统计分析和深入研究。研究结果表明:路基冻结深度的发展主要受气温的影响,基床表层以下填料含水量随着冻结深度增加缓慢增加;基床表层及基床底层上部1.0 m范围冻胀量占总冻胀量的80%以上;低路堤地段冻胀最严重。为减少路基冻胀量,设计及施工时应采用全冻结深度防冻胀方案,以填料防冻胀为主,辅以防水、疏水和隔热等综合措施;低路堤地段防冻胀措施应适当加强。     

面向新型混合交通流的智能交叉口网络布局优化

考虑网联自动驾驶车辆(Connected Autonomous Vehicle, CAV)应用先进的车联网与自动驾驶技术，可以采用智能交叉口的组织形式，大幅提升交叉口的通行效率，为降低CAV与人工驾驶车辆(Human-driven Vehicle, HV)混行条件下城市交通系统的整体出行成本，提出智能交叉口在城 市交通网络中的布局优化问题，建立数学优化模型并求解。首先，基于对两类车辆行驶特性的分析，建立混合用户均衡模型，描述CAV与HV的路径选择行为；其次，从交通规划者的角度，以系统最优为目标，整合混合用户均衡模型，建立面向新型混合交通流的智能交叉口网络布局优化模型，并利用改进的遗传算法求解；最后，选取Sioux-Falls交通网络作为案例分析，验证模型与算法的有效性，并研究CAV渗透率变化对优化结果的影响。研究表明，智能交叉口在城市路网中的合理规划极大地提高了新型混行场景下城市交通系统的出行效率，同时，大幅降低了由于网联自动 驾驶单方面技术优势带来的CAV与HV的出行效率差距，增进了出行公平性。     

预制综合管廊接头抗剪性能与等效模拟方法

预制管廊接头力学性能及设计方法研究尚属于起步阶段,理论尚不成熟,对接头受力性能的认识尚不清晰。为研究预制管廊接头的抗剪性能及影响因素,基于福建省平潭预制拼装综合管廊工程,以典型的双舱和三舱预制拼装综合管廊结构为例,采用PLAXIS 3D岩土有限元程序建立预制管廊接头精细化三维数值模型,深入分析管廊接头的抗剪性能及影响因素,并提出合理实用的管廊接头等效模拟方法。研究结果表明,不设置剪力键时接头的极限总剪力降低了11.1%,设置剪力键能够明显地改善接头的抗剪性能;接头剪切强度和剪切刚度均与预应力基本呈线性关系;采用等效界面模型可以比较合理地模拟剪力键接头的抗剪力学行为。     

云南省民航客运发展预测

民航运输是云南省在进行综合交通运输建设的重点之一,也是该省在未来"十四五"(2021-2025年)和"十五五"(2026-2030年)规划期间的研究热点。本文以云南省为研究范围,以省内民航客运为研究对象,选取省内主要的社会经济因素为影响因子,运用主成分分析法(PCA)、反向传播神经网络算法(BP神经网络算法)和回归分析法,构建了省内民航客运的预测模型,得出省内各主要机场在"十四五"末和"十五五"末的预计旅客吞吐量,对省政府在进行机场改扩建上有一定的指导意义。