小额支付系统的实现与处理流程

本文参考某省移动公司小额支付电子商务平台的实际项目,从工程项目的角度描述了业务功能和系统结构,并详细叙述了其中一种代表性的业务处理流程,为移动小额支付业务提供了完整的概要设计方案.     

基于MPS的自动加工线在线监控系统的设计

以德国Festo公司的MPS模块加工系统为基础，设计了一种基于MPS（内含送料、检测、加工、取件及分拣5个单元）的零件自动加工控制实验系统。系统采用华光PLC作为主要控制设备，完成自动控制系统的硬件和软件设计，实现PLC与上位机之间的通信，并且利用工业组态软件完成了监控程序的开发，实现了对该系统的在线监控。     

Numerical simulation of wave-induced nonlinear motions of a two-dimensional floating body by the moving particle semi-implicit method

The moving particle semi-implicit (MPS) method was applied to compute nonlinear motions of a floating body influenced by the water on deck. To compute the motions of a rigid body, the fluid pressure at the position of each particle on the body surface was directly integrated in space and the equations of translational and rotational motions were integrated in time to determine the correct position of the rigid-body surface at each time step of the time-domain calculation. The performance of this method was validated through a comparison with measured results in an experiment that was newly conducted using a model of a box-shaped floating body with a small freeboard. Although the overall agreement was good, some discrepancies were observed for a shorter wave period, especially for the drift motion in sway. The effect of numerical resolution on the results was checked by changing the number of particles. With a higher number of particles, no obvious improvement was seen in the global body motions, but the resolution of the local free-surface profile, including the water on deck, was improved.     

数控车床仿真系统开发

根据数控车削加工的特点，提出一个基于构造单元的工件分解表达模型，利用此模型与刀具实体模型做布尔减运算，实时模拟工件材料的去除加工过程，并验证加工结果．在此基础上，根据切削力、切屑形成原理，提取几何仿真中的切削层参数和一些相关参数，将其应用于切削力计算和切屑仿真中，形成几何仿真和物理仿真集成的数控车床仿真系统．     

溃坝问题的数值仿真和实验(英文)

In this paper, two novel numerical computation methods are introduced which have been recently developed at Research Institute for Applied Mechanics ( RIAM ), Kyushu University, for strongly nonlinear wave-body interaction problems, such as ship motions in rough seas and resulting green-water impact on deck. The first method is the CIP-based Cartesian grid method, in which the free surface flow is treated as a multi-phase flow which is solved using a Cartesian grid. The second method is the MPS method, which is a so-called particle method and hence no grid is used. The features and calculation procedures of these numerical methods are described. One validation computation against a newly conducted experiment on a dam break problem, which is also described in this paper, is presented.     

基于改进MPS方法的三维时域水弹性计算模型

本文在作者已有的二维改进MPS(Moving Particle Semi-implicit)方法基础上进行了三维拓展(主要包括三维自由面粒子判断),并通过将计算得到的三维溃坝问题结果与文献中实验结果相对比,验证了所发展模型的准确性。在结构响应计算方面,将刚性和柔性模态耦合并计及相互影响。在此基础上,将流体和结构部分通过迭代方式耦合,从而实现强流固耦合计算。最后,应用上述模型对涉及大刚体位移叠加弹性变形的三维方梁的强非线性时域水弹性问题进行了计算,验证了模型对此类问题的有效性。     

Two-dimensional numerical simulation of water splash phenomena with and without surface tension

Two-dimensional numerical analyses were conducted and analyzed to simulate water splash produced by free falling object models starting from the resting position. The equilateral prism-shaped object models were allowed to fall onto the free surface of the water. The moving-particle semi-implicit (MPS) method was used to solve the unsteady Navier-Stokes equation for incompressible fluid flows with and without the surface tension effect. Froude numbers of 0.75, 1.0, and 1.25 were used with different model sizes for the entry velocity at the free surface. Splashes obtained by numerical computation closely agreed with the experimental results. The surface tension force, the Froude number, and the Weber number were found in these calculations to play major roles in determining various types of splash shapes. Model size was found to influence splash phenomena, even if the Froude number remained the same. The dependencies on these two nondimensional numbers and the fundamental law of similarity on water splash with and without the surface tension effect were thoroughly investigated in this research. Several two-dimensional numerical simulations are presented in this article to describe the hydrodynamic behaviors of water splash with and without the surface tension effect.     

Numerical simulation of viscous liquid sloshing by moving-particle semi-implicit method

A meshless numerical simulation method, the moving-particle semi-implicit method （MPS） is presented in this paper to study the sloshing phenomenon in ocean and naval engineering. As a meshless method, MPS uses particles to replace the mesh in traditional methods, the governing equations are discretized by virtue of the relationship of particles, and the Poisson equation of pressure is solved by incomplete Cholesky conjugate gradient method （ICCG）, the free surface is tracked by the change of numerical density. A numerical experiment of viscous liquid sloshing tank was presented and compared with the result got by the difference method with the VOF, and an additional modification step was added to make the simulation more stable. The results show that the MPS method is suitable for the simulation of viscous liquid sloshing, with the advantage in arranging the particles easily, especially on some complex curved surface.     

移动粒子半隐式法的大涡模拟研究与应用

研究了移动粒子半隐式法(MPS),结合Smagorinsky涡粘模型,实现了MPS的大涡模拟。针对MPS中原自由表面判别方法容易造成非自由表面粒子被误判这一缺陷,提出了一种新的基于邻居搜索的混合判别方法,该方法在原方法容易出错的阶段使用邻居搜索,搜索范围和MPS模型中梯度模型一致以减少计算量,使用表明该方法能够较准确地识别自由表面并显著地减少原自由表面判别法导致的误判现象。在压力震荡现象方面,使用了一种时间-面积混合平均法。最后模拟了溃坝模型和半满液箱模型,模拟的结果同实验值基本保持一致。     

基于Petri网的模块化生产系统建模

针对模块化生产系统是一种结构组成多样,事件触发频繁,控制对象多,控制信息量大,系统结构复杂的典型的离散型动态系统,基于Petri网对模块化生产系统总体工艺路线进行建模,验证了所设计的总体工艺路线的可行性.同时提出了一种直接利用Petri网编写PLC程序的方法.