杭州湾跨海大桥70 m预应力混凝土箱梁用海工耐久混凝土的试验研究

通过平板抗裂试验,研究了海工耐久混凝土的早期抗裂性,采用RCM法研究了海工耐久混凝土抗氯离子渗透的能力。结果表明,使用P.Ⅱ42.5(R)硅酸盐水泥、Ⅱ区中砂、5~25 mm碎石、Ⅰ级或Ⅱ级低钙粉煤灰、粒化高炉矿渣粉及新一代高性能高效减水剂,可以配制出C 50~C 60海工耐久混凝土。     

汽车系统单元化集成设计中相似性与复杂性

基于相似性科学和相似系统理论，研究了汽车系统中单元特征相似性分析方法，汽车系统相似性度量方法，相似单元设计和单元化系统集成设计中的相似性与差异性变化引起的复杂性。提出了以系统相似性度序列变化和差异性，集成设计系列化、多样化、个性化汽车产品系统新的理论方法。     

Theory of safety surrogates using vehicle trajectories in macroscopic and microscopic settings: Application to dynamic message signs controlled traffic at work zones

This paper presents a new mathematical framework for obtaining quantitative safety measure using macroscopic as well as microscopic traffic data. The safety surrogate obtained from the macroscopic data is in terms of analysis performed on vehicle trajectories obtained from the macroscopic data. This method of obtaining safety measure can be used for many different types of applications. The safety surrogate for the traffic dynamics are developed in terms of a new concept of Negative Speed Differentials (NSD) that involve a convolution of vehicle speed function obtained from vehicle trajectories and then performing the integration of the square of the output for its negative values. The framework is applicable to microscopic traffic dynamics as well where we can use car following models for microscopic dynamics or the LWR model for macroscopic dynamics. This paper then presents the use of this new safety surrogate on the development of a feedback control law for controlling traffic in work zones using Dynamic Message Signs. A hybrid dynamics model is used to represent the switching dynamics due to changing DMS messages. A feedback control design for choosing those messages is presented as well as a simple simulation example to show its application.     

Evaluating sustainability of supply chains by two-stage range directional measure in the presence of negative data

Assessing sustainability of supply chains is a critical and increasingly complex problem. In recent years sustainability has received more attention in supply chain management (SCM) literature with triple bottom lines including social, environmental, and economic factors. Conventional data envelopment analysis (DEA) models consider decision making units (DMUs) as black boxes that consume a set of inputs to produce a set of outputs and do not take into consideration internal interactions of DMUs. Two-stage DEA models deal with such DMUs. However, existing two-stage DEA models are applicable only in technologies characterized by positive inputs/outputs. This paper aims to build and present a new two-stage DEA model considering negative input-intermediate-output data. Some numerical examples along with some theorems and properties are given to show capability of proposed method. The proposed ideas are used in a case study where 29 Iranian supply chains producing equipment of expendable medical devices are evaluated in terms of sustainability.     

提高车用发动机活塞环摩擦学性能的试验研究

制备了直接离子渗氮环与超声滚压加工-离子渗氮环两类摩擦学试样。利用电子显微镜、硬度计、X射线衍射仪和能谱仪,对表面改性层进行了表征,分析了超声滚压预处理对316L不锈钢活塞环离子渗氮行为的影响;在润滑油条件下,使用往复式摩擦磨损试验机,对比考察了直接渗氮环和超声滚压-渗氮环的摩擦学性能。结果表明,超声滚压-渗氮环相对于直接渗氮环渗氮层的氮含量增加了2.9倍,显微硬度提高了1.1倍,摩擦因数降低了0.04,耐磨性提高了2.8倍。发动机台架试验表明,超声滚压-渗氮环与硼铸铁氮化气缸套的匹配性最好。     

Sm0.8Ca0.2AlO3-δ固体电解质的合成及其导电性能

为了改善SmAl O3体系的导电性能,提高其离子电导率,在固相反应条件下,用Ca对SmAl O3中的A位进行了部分替代,成功合成了具有四方钙钛矿结构的固体电解质Sm0.8Ca0.2Al O3-δ。以该材料作为电解质隔膜,Pt作电极组成了氢-空气燃料电池,并测定了该燃料电池在800℃~1000℃范围内的电动势。氧离子迁移数通过实测电动势与利用Nernst方程导出的理论电动势的比值来确定,在测量温度范围内氧离子迁移数都大于0.96,样品以离子导电为主。阻抗谱测量结果表明:Ca的掺杂大大提高了样品的电导率,Sm0.8Ca0.2Al O3-δ在800℃时电导率为0.035 S/cm,与钇稳定的二氧化锆(YSZ)的电导率相当。Ca掺杂的SmAl O3是一种性能较为优良的固体电解质。     

信号过完备稀疏表示的唯一解及其边界条件

在探讨应用冗余字典寻找信号稀疏表示算法的基础上,简介信号过完备表示产生的背景和发展过程,认为信号表示的稀疏性与冗余字典的非相干性存在某种必然联系;结合正在进行的信号过完备稀疏表示理论与应用研究的专项课题,理论上讨论了满足基追踪算法和匹配追踪算法精确重构条件以及多个正变基级联字典的非相干系数与精确重构条件的某些研究进展,并提出对于非正交基联合而成的级联字典有待进一步研究的相关问题．     

轨道交通车载智能应急电源系统

作为在紧急情况下为轨道交通列车辅助系统供电的应急电源,铅酸或镍铬电池被普遍使用;随着技术的不断发展,锂离子电池的应用也越来越广泛.介绍了GJCL-A型锂离子轨道交通车载智能应急电源系统的组成、工作原理、设计方案及试点应用情况.GJCL-A型锂离子轨道交通车载智能应急电源系统的试验应用结果表明,用于车厢的110V应急供电4 300 s后,其剩余电量仍有40％以上.     

引气粉煤灰混凝土的氯离子扩散系数

基于盐碱寒冷地区的工程环境与混凝土的配制特点,模拟配制了SA溶液,采用正交方案试验研究了水灰比、含气量和粉煤灰掺量3个参数对引气粉煤灰混凝土氯离子扩散系数的影响,建立了氯离子扩散系数计算模型,并采用游程检验法对计算模型进行了检验,结果表明该模型表征的相关关系显著,预测值与实测值无显著差异。     

大掺量磨细矿渣粉高性能混凝土的试验研究

论述了大掺量磨细矿渣粉对混凝土性能的影响,研究结果表明:用S95磨细矿渣粉和少量粉煤灰可以配制出早期抗裂性和耐久性均好的C50~C70高性能混凝土,84 d氯离子扩散系数均小于1.50×10-12m2/s;大掺量磨细矿渣粉高性能混凝土的收缩徐变较普通混凝土小。