新《海安法》下集装箱检验和监管对策研究

介绍了新修订的《海上交通安全法》以及国际公约和其他国内法律法规对集装箱检验和监管的要求,分析了外贸和内贸集装箱检验现状以及监管方面存在的问题,提出了相关对策和建议。     

A new solution for two-bag air suspension system with leaf spring for heavy-duty vehicle

The design problem of a two-bag air suspension system for heavy-duty vehicles is formulated as a two-level (suspension system level and component level) optimization problem. At the suspension system level, optimal stiffness matrix of leaf spring, characteristics of damper and upper rod layout are determined by solving a multi-objective constrained optimization problem with response surface. At the component level, shape and thickness of the leaf spring are formed using cubic-spline curves to make the stiffness matrix as close to the target values cascaded from suspension system level as possible. Simulations using a vehicle model described by multi-body model and FEM of the novel leaf spring validate the suspension system thus derived.     

旧水泥混凝土路面加铺沥青混凝土面层勘测设计

旧水泥混凝土路面加铺沥青混凝土面层，当没有路线设计资料时，需对旧有路线进行拟合，重新进行勘测设计，以获得与旧有路线一致的路线设计资料，为旧水泥混凝土路面加铺沥青混凝土面层提供设计依据。结合工程实践，介绍了拟合旧有路线时勘测设计的内容和方法。     

图形驱动式路线施工放样与控制系统的研究与实现

为提高路线施工测量计算的计算机应用水平,提出图形驱动式路线施工测量计算方法,并以自主研制的FunGra系统为图形环境,通过建立基于功能图形对象的路线施工测量计算对象模型,以及在系统中提供创建和操作这些功能图形对象的便捷机制,实现了一个图形驱动式路线施工测量计算系统。现场应用验证了该系统的可行性和高效率。     

基于闭环力反馈原理的非线性液压主动阻尼悬架模型的研究及优化设计

本文在理论上建立了一套基于主动力反馈原理的新型主动阻尼悬架的设计和优化方法。首先提出了该主动阻尼悬架的实现模型，该模型是在传统的液力减振器的基础上，应用半主动控制的思想，结合力反馈的原理建立起来的内部液压反馈阻尼网络模型。理论优化分析和计算机仿真表明，通过该液阻网络模型，即可以实现电控的主动阻尼悬架的功能，它可以根据汽车行驶路况的好坏，自适应地调节悬架阻尼大小以实现主动阻尼悬架的最优控制。     

Aggregate expenditure elasticity for transport and communication in Australia

For the purpose of estimating Engel elasticity, one needs to find the best functional form among various alternatives. In this paper, a new function, which is called the double semi-log Engel function turns out to be the best functional form for the transport and communication items in Australia on the basis of the distance function (D²) criterion, and the non-nested hypothesis testing procedure. This function is then used to estimate total expenditure elasticity, and the percentage change in consumer demand due to changes in total expenditure and total expenditure inequalities; using the 1975–76 Household Expenditure Survey data. The results of the analyses demonstrate that transport and communication is a necessary item in Australia on the basis of two criteria, viz., its elasticity is not significantly greater than unity, and the percentage change in demand increases with a decrease of the total expenditure inequality [emphasised by Iyengar (I960)]. Policy implication of the analyses has also been discussed.     

异地协同设计在勘察设计中的应用

本文以铁三院为例,对异地勘察设计作业模式从“现场设计”发展到“异地协同设计”的实践、存在的问题及解决方法进行了分析。文中提到的部分方法已经在铁三院生产、管理中得到应用,并取得了较好的效果;对需进一步改进的问题也提出了解决方案。     

用动态规划方法优化设计船舶车辆甲板结构

基于规范的车辆甲板结构优化设计在数学上是一个较大的非线性规划问题，而且为了满足实际需要，其中一些变量只能离散变化。本文将该问题处理为三阶段决策问题，因而能运用动态规划方法有效地求解。通过一个实例详细说明求解过程，从中看出应用动态规划方法解决基于规范的船舶结构优化设计问题的特色。     

铁路通过小型采空区的综合勘察与线路优化

在地形地质条件复杂地段,地质选线对铁路工程具有重要的意义。以某铁路线路通过一小型采空区为例,在线路无法绕避的情况下,采用综合手段对采空区进行探查。先在现场地质测绘调查的基础上针对性布置物探测线探查,再根据探查结果合理安排钻探对探查结果进一步修正。通过对资料的综合分析,详细绘制采空区范围和规模,对线路方案进行优化调整。现场施工表明综合勘察手段对线路优化具有良好效果。