A combined assessment of air and noise pollution on the High Line,New York City

The High Line is an elevated public park in New York City, transformed from an unused freight rail line. Pedestrians walking through Manhattan’s West Side can walk either on the High Line or on a footpath below. Using Manhattan as a laboratory, this paper offers a combined assessment of noise and particulate matter pollution for its pedestrians. Noise and PM_2.5 levels were recorded simultaneously for two cases (i) pedestrians walking on a footpath alongside road traffic and (ii) pedestrians walking on the elevated High Line. Testing took places over three days in autumn 2014. Results were analysed to investigate if pedestrians using the High Line would have a lower pollution exposure to those using the footpath below. Results showed statistically significant differences between the upper and lower levels in exposure to both pollution types. In order to quantify the overall impact, results are expressed through a combined air–noise pollution index. This index indicates that the average reduction in PM_2.5 and noise pollution along the High Line compared to the footpath below is approximately 37%.     

Preliminary investigation of PM1, PM2.5, PM10 and its metal elemental composition in tunnels at a subway station in Shanghai,China

In this study, real-time monitoring campaigns were conducted in two tunnels (Line A and Line B) at a subway station in Shanghai, including temperature, relative humidity, PM₁, PM_2.5 and PM₁₀, in order to understand the climate and PM characteristics in the transportation microenvironment. In addition, collected floor dust particles in the tunnel were analyzed by ICP for their metal elemental composition. Strong correlations occurred between all PM levels and meteorological parameters in the tunnel of Line A (with platform screen doors), in comparison with the weak correlations between such parameters in the tunnel of Line B (without platform screen doors). PM_2.5 and PM₁₀ between peak hours and off-peak hours for both lines presented significant differences (p < 0.05), respectively. Nevertheless, PM₁ showed a different pattern, with p > 0.05 for Line A and p < 0.05 for Line B, respectively. In addition, statistical results concluded that PM had an evident weekly variation for both lines. Friday was the highest day of all particulate matters in monitoring periods for both lines. Ratios of PM₁/PM₁₀ and PM_2.5/PM₁₀ were high when trains were out of service and low when trains were in service. Relative abundance of metal elements detected from floor dust particles proved that floor dust particles in tunnels might be a major source of airborne PM in the subway microenvironments, with Fe as the most abundant metal element, followed by Ca, Al, Mg, Mn, Zn, Cu, Cr, Ni, Pb and Hg.     

Spatial distribution of cadmium over a cyclonic eddy in the southern East China Sea

Eddy systems are a unique ecosystem, usually having high biological masses and primary production in the sea. In this study, both particulate and dissolved phases of cadmium in the water column of 15 stations over a cyclonic eddy in the southern East China Sea were determined to obtain their spatial distributions. This allows us to confirm that cyclonic eddy systems play the role of a Cd pump in the sea.Results showed that particulate Cd (PCd) and dissolved Cd (DCd) concentrations in water varied greatly, ranging over two orders and one order of magnitude, respectively. Large spatial variability was found not only for PCd but also for DCd in the upper water, apparently due to the effects of the cyclonic eddy system on the Cd distributions over the study area. DCd accounts for about 99% of the total Cd. For the surface water, DCd concentration at the eddy center was about five times the average of the water surrounding the eddy center. The depth distributions of DCd exhibited a typical surface depletion and a subsequent increase with depth; however, the PCd distribution showed the opposite, i.e. a surface maximum and a subsequent decline with depth. In general, the DCd maxima were found at depths of 600–1000 m, agreeing well with the literature. It reflected the internal biogeochemical cycling of Cd in the water column, which was driven by the utilization of Cd by plankton in the euphotic zone and by the regeneration of Cd at depth. In addition, a remarkably high DCd concentration existed in near-bottom water around the cyclonic eddy center.The horizontal distributions of both PCd and DCd in the upper water shared a common feature with elevated concentrations centering around the eddy center and a decline in concentration with distance from the eddy center. This shows that the cyclonic eddy could bring up the Cd-rich deep water to the surface water around the eddy center and could then expand toward eddy's vicinity via advection–diffusion. It is thus likely that it produces ample biological masses over the eddy system. Hence, this work can demonstrate that the ascending nutrient-rich water driven by the cyclonic eddies can serve as an important source not only for many nutrients but also for Cd in the sea.     

柴油发动机颗粒物测试方法及影响因素（续1）

颗粒物是柴油发动机的主要排放物之一。目前在试验室内主要的测试方法是全流稀释采样系统和部分流稀释采样系统。文章介绍了全流和部分流采样的原理,分析了选择采样方法的原则;分别描述了全流和部分流颗粒采样过程中各参数对颗粒物的影响,特别是目前国内可以进行型式核准的部分流颗粒物采样系统;着重阐述了提高2种采样方法的相关性措施。分析认为,应着重关注部分流和全流的颗粒物采样条件对测试结果一致性的影响,以提高我国内燃机颗粒物排放测试的整体水平。     

A new approach for evaluating regional exposure to particulate matter emissions from motor vehicles

Exposure to fine particulate matter from vehicle exhaust is associated with increased health risk. This study develops a new approach for creating spatially detailed regional maps of fine particulate matter concentration from vehicle exhaust using a dispersion model to better evaluate these risks. The spatial extent, diurnal, and seasonal patterns of concentration fields across Los Angeles County, California are evaluated and population exposure and exposure equity by race and income are investigated. The results demonstrate how this modeling approach can create new knowledge about vehicle emissions exposure. This approach also provides a method for proactively screening out regional plans, or specific projects within these plans, that are likely to cause air quality concerns. A proactive and regional air quality assessment can identify potential problems earlier in the planning process and a wider range of solutions, saving time, money and protecting public health. The detailed concentration maps can also be used to improve the siting of regulatory air quality monitors and provide more accurate exposure data for epidemiology studies.     

Inhalable railroad particles at ground level and subterranean stations - Physical and chemical properties and relation to train traffic

The paper compares PM10 concentrations in railroad environments with EU air quality standards and characterizes particle concentrations and particle properties in relation to train traffic. The results show that PM10 concentrations in ground-level railroad environments do not exceed the EU directive 24-h limit value, while on the platforms of the two subterranean stations PM10 concentrations were far above the outdoor limit value. Diurnal and weekly patterns in PM10 concentration could be identified, co-varying with train traffic intensity. The particle mass size distribution peaked at around 2-6 μm. The elemental composition of PM10 at the subterranean stations was dominated by Fe.     

Particulate matter in marine diesel engines exhausts: Emissions and control strategies

Marine diesel engines emit particles that have a complex nature, being composed by carbonaceous particles, with size spanning from few nanometres to less than one micron, and inorganic particles of micron size mainly made by ashes and sulphates.On a global scale, international shipping is responsible for few percentages of the particulate matter emissions, which also affect climate, but the regional distribution of naval traffic suggests the insurgence of significant exposure risk for population living along the coastal areas, due to chronic exposure effects. Specific strategies should be implemented to reduce the emissions of all the components of particulate matter. This paper aims to present a survey on the current and innovative strategies to remove particles from marine diesel engine exhausts, along with a critical review of the most recent findings on ships emitted particles. Evidences on physical–chemical properties, toxicology and emission factors of the particles were reported. This survey indicates that several strategies can provide a significant reduction of particulate matter emissions from ships and integration between innovative after-treatment systems, ships design and operation procedures can potentially lead to overall reduction of more than 99% even with parallel fuel savings.     

Characteristics of particulate matter (PM) concentrations influenced by piston wind and train door opening in the Shanghai subway system

More than 9 million passengers take Shanghai’s subway system every work day. The system’s air quality has caused widespread concern because of the potential harm to passengers’ health. We measured the particulate matter (PM) concentrations at three kinds of typical underground platform (side-type, island-type, and stacked-type platforms) and inside the trains in Shanghai’s metro during 7 days of measurements in April and July 2015. Our results demonstrated that the patterns of air quality variation and PM concentrations were similar at the side-type and island-type platforms. We also found that the PM concentrations were higher on the platforms than inside the train and that the PM concentrations in the subway system were positively correlated with those in the ambient air. Piston wind generated by vehicle motion pushes air from the tunnel to the platform, so platform PM concentrations increase when trains approach the platform. However, the piston wind effect varies greatly between locations on the platform. In general, the effect of the piston wind is weaker at the middle of the platform than at both ends. PM concentrations inside the train increase after the doors open, during which time dirty platform air floods into the compartments. PM_1.0 and PM_2.5 were significantly correlated both inside the train and on the platforms. PM_1.0 accounted for 71.9% of PM_2.5 inside the train, which is higher than the corresponding platform values. Based on these results, we propose some practical suggestions to minimize air pollution damage to passengers and staff from the subway system.     

On particulate emissions from moving trains in a tunnel environment

Increasing attention is being paid to airborne particles in railway environments because of their potential to adversely affect health. In this study, we investigate the contribution of moving trains to both the concentration and size distribution of particles in tunnel environments. Real-time measurements were taken with high time-resolution instruments at a railway station platform in a tunnel in Stockholm in January 2013. The results show that individual trains stopping and starting at the platform substantially elevate the particulate concentrations with a mobility diameter greater than 100 nm. Two size modes of the particulate number concentrations were obtained. A mode of around 170 nm occurs when a train moves, while the other mode peaks at about 30 nm when there is no train in the station. By using principal component analysis (PCA), three contributing sources were identified on the basis of the classification of the sizes of the particles, namely railway-related mechanical wear, suspension due to the movement of trains and sparking of electric-powered components. It is concluded that the particulate matter released by individual moving trains is a key contributor to fine particles (100–500 nm) on the railway platform in a tunnel.