成昆线红层地区泥石流沟侵蚀程度量化分析

以成昆铁路红层地区的3个小流域为研究区,计算3个年份的地面割裂度及其年平均变化率,分析用地面割裂度表征泥石流沟侵蚀程度的不足及其原因。基于泥石流沟发育的物理模型,以原来的地面割裂度定义为基础,引入表述沟谷分布零散程度的异型度因子,导出新侵蚀系数公式。以3个小流域固体物质的年平均流失量作为侵蚀程度强弱的标准,采用非参数统计推断方法,将侵蚀系数、地面割裂度的年变化值和固体物质的年平均流失量作秩统计和次序统计。对秩统计参数和次序统计参数比较结果表明:在表征泥石流沟侵蚀程度方面,侵蚀系数优于地面割裂度。     

铁道车辆涂层抗石击性能试验方法

随着动车组运行速度的提高,车体表面涂层受石击损坏情况加重.根据高速铁路的特点,分析环境影响因素,比较汽车行业的主流石击试验方法标准.经过研究和试验比对,提出适用于铁道车辆涂层的抗石击性能试验方法.     

时间对复合地基桩间土承载力的影响研究

结合青藏铁路西格段增建二线工程碎石桩复合地基工程实例,通过重型动力触探试验和桩间土承载力计算分析,研究了复合地基桩间土承载力随软土固结时间提高的特性,得到了动力触探曲线随时间变化的规律;理论分析了地基处理后瞬时桩间土承载力与处理前地基承载力的关系,得到了时间对桩间土承载力影响的规律,给碎石桩复合地基的处理效果提供评价依据,为碎石桩复合地基上层的路基施工提供科学指导.     

紊流混摩区摩阻因数近似公式分析

根据对90号无铅汽油和0号柴油进行摩阻实验所取得的实测数据，对紊流混摩区的近似公式进行了误差的计算和比较，并分析了误差产生的主要原因。计算和分析结果表明：科尔布鲁克公式是紊流混摩区的较准确的计算公式，近似公式只适用于粗略的计算和数学分析。     

连云港海相软土基本特性与处理方法探讨

根据连云港地区多条高速公路工程的地质资料,并与我国部分沿海地区软土进行对比,分析连云港海相软土的基本物理力学指标统计特征、抗剪强度特性、固结变形特性以及蠕变特性,并介绍了适合于该海相软土的主要地基处理措施。     

Centrifuge modelling of pipe-soil interaction in clay with crust layer

Seabed in regions, such as the Gulf of Guinea and North West Shelf of Australia, may exhibit a crust layer where the undrained shear strength can be an order of magnitude higher than that of the immediately underlying sediment. This can complicate design of steel catenary risers, where fatigue depends on the cyclic vertical stiffness of the pipe-soil interaction. Potential punch-through of the riser into the underlying soft soil may invalidate design assumptions based on the pipe-soil stiffness within the crust layer. The long-term evolution of pipe-soil stiffness within the crust layer, which exhibits similar properties to an over-consolidated soil, is also poorly understood. This paper describes centrifuge model tests undertaken in a clay sample with a crust layer, simulating the punch-through process of a pipe under load control and investigating the pipe-soil stiffness during long-term cyclic loading tests under displacement control. Results confirm that the potential for punching-through the crust layer depends strongly on the relative ratio of pipe diameter to crust layer thickness. The long-term evolution of pipe-soil stiffness showed a steady increase after an initial remoulding stage in contractile soils (normally consolidated and lightly over-consolidated), but a steady reduction in the heavily over-consolidated, more dilatant, crust. The magnitude of pipe-soil stiffness changes (during both remoulding and reconsolidation) is governed by the over-consolidation ratio of the soil and the amplitude of the cyclic displacements. This study provides insights on the relevant cyclic stiffness to consider when assessing SCR fatigue life in over-consolidated soils and soils exhibiting a superficial crust layer.     

小型直喷式柴油机燃用生物质能燃料的性能研究

文章主要研究了生物质能混合燃料在柴油机上的应用,通过在一台小型直喷式柴油机上进行不同组分柴油-生物柴油-乙醇混合燃料的燃烧、油耗和排放性能对比试验,分析了乙醇含量的改变对混合燃料的发动机燃烧压力、滞燃期、放热规律、比油耗和排放的影响．     

Orana44双体帆船阻力计算与分析

Maxsurf软件是由澳大利亚Formation Design Systems公司为船舶设计和建造者开发的、适用于各种船舶设计、分析和建造的一套非常完整的计算机辅助船舶设计和建造软件。文章以Fountain Pajot公司的Orana44双体帆船为例,讨论了Maxsurf软件对双体帆船阻力计算是否依然适用,并将Maxsurf软件中的Hullspeed模块的计算结果与循环水池试验的结果进行了对比。同时,将计算出的不同速度下的所需动力值与已知的资料进行对比。通过对比分析发现,利用Maxsurf软件计算得到的阻力值较为合理的反映出了双体帆船的实际阻力性能,可以为双体帆船的阻力计算提供了有价值的参考。     

冷试技术在发动机装配线上的应用分析

冷试技术具有较多优势,为让该项技术可以在汽车行业获得更大的应用空间,文章重点分析了汽车发动机装配线上冷试技术中关键技术的具体运用。文章通过对机油压力、扭矩、进气真空度及排气压力、高速NVH检测与低速NVH、曲轴与凸轮轴正时以及传感器线速进行检测,对冷试技术在发动机装配线上的运用进行了分析。了解到发动机冷试技术可以全方位提高我国发动机质量,压缩发动机的质量检测成本,在汽车行业具有较好的应用前景。汽车发动机由于各项新技术的发展应用,其系统结构更加复杂,发动机中的外购件占成本比例随之增长,汽车制造企业必须对零部件系统加强检测。希望可以为相关从业人员具有一定的参考作用,并推进汽车行业更好的发展。     

On the numerical accuracy of the prediction of resistance coefficients in ship stern flow calculations

This article presents a study on the accuracy of the numerical determination of the friction and pressure resistance coefficients of ship hulls. The investigation was carried out for the KVLCC2 tanker at model- and full-scale Reynolds numbers. Gravity waves were neglected, i.e., we adopted the so-called double-model flow. Single-block grids with H–O topology were adopted for all the calculations. Three eddy viscosity models were employed: the one-equation eddy viscosity and the two-equation models proposed by Menter and the TNT version of the two-equation k-ω model. Verification exercises were performed in sets of nearly geometrically similar grids with different densities in the streamwise, normal, and girthwise directions. The friction and pressure resistance coefficients were calculated for different levels of the iterative error and for computational domains of different size. The results show that on the level of grid refinement used, it is possible to calculate the viscous resistance coefficients in H–O grids that do not match the ship contour with a numerical uncertainty of less than 1%. The differences between the predictions of different turbulence models were larger than the numerical uncertainty; however, these differences tended to decrease with increases in the Reynolds number. The pressure resistance was remarkably sensitive to domain size and far-field boundary conditions. Either a large domain or the application of a viscous–inviscid interaction procedure is needed for reliable results. This work was presented in part at the International Conference on Computational Methods in Marine Engineering—MARINE 2007, Barcelona, June 3–4, 2007.