电力机车车轴热处理工艺的研究

分析了EA4T钢的性质特征以及传统调质处理工艺所存在的问题,系统地研究了正火、淬火及回火工艺对材料的组织及性能的影响规律。通过系统的实验,探索出了DJ4型机车车轴的最佳热处理工艺参数。     

强化胎盘因子对细胞因子产生的影响

在观察了强化胎盘因子对淋巴细胞增殖试验影响的基础上,应用CTLL-2和7TD_1两种细胞株对强化胎盘因子刺激后的小鼠脾脏细胞分泌白细胞介素-2(IL-2)和白细胞介素-6(IL-6)水平分别进行了实验研究。结果表明,强化胎盘因子促进T淋巴细胞增殖,使小鼠脾脏细胞分泌IL-2和IL-6水牛均明显提高,有增强机体免疫功能的作用。     

IPv4与IPv6的比较研究

文章主要描述了IPv4协议与 IPv6协议的不同之处,分别从首部格式、地址空间、地址分配、路由协议、域名解析、自动配置、安全性等方面对IPv6与IPv4进行了比较研究。指出了IPv6有别于IPv4的新的重要特征。     

中间轴驱动装置固定对弹性悬挂式机车动力学性能的影响

为防止弹性悬挂式机车中间轴驱动装置横向位移过大,发生碰撞,提出了端轴驱动装置弹性悬挂、中间轴驱动装置固定连接的方式。利用多体动力学软件SIMPACK建立整车动力学模型,对比分析驱动装置悬挂方式对机车动力学性能的影响,认为采用这种悬挂方式是合理可行的。     

30m预应力混凝土T型梁钢模板加工工艺

本文以预应力混凝土T型梁中梁模板的侧模板为例,介绍了30m大型钢模板的结构,加工所用设备,并详细介绍了中梁钢模板的加工工艺,提出了加工过程中应注意的几个技术问题并进行了经济效益分析,认为采用现场加工工艺是可行的.     

T_H1 AND T_H2 CELL ANTIGEN RECEPTORS IN EXPERIMENTAL LEISHMANIASIS

Ｔ_Ｈ１ＡＮＤＴ_Ｈ２ＣＥＬＬＡＮＴＩＧＥＮＲＥＣＥＰＴＯＲＳＩＮＥＸＰＥＲＩＭＥＮＴＡＬＬＥＩＳＨＭＡＮＩＡＳＩＳＳｔｅｖｅｎＬ．Ｒｅｉｎｅｒ，ＷａｎｇＺｈｉ＇ｅｎ；ＦａｒａｈＨａｔａｍ，ＰｈｉｌｌｉｐＳｃｏｔｔ，ＲｉｃｈａｒｄＭ．Ｌｏｃｋｓｌｅｙ（...     

青藏线格拉段5T综合预报关联TFDS信息的探讨

为提高车辆红外轴温探测系统THDS的兑现率,现以青藏线格尔木—拉萨段实施的5T系统预报为基础,关联TFDS信息,进行了热轴综合预报探讨。文中给出了关联TFDS信息的解决方案,应用效果良好。     

铁路工程T梁不同运架方式施工工艺及造价分析

目前,铁路建设的T型梁运输架设,一般采用“边铺边架”的施工组织方案,该方案存在架梁方向单一、工作面少的缺点。为了弥补这种单一运架方式的不足,达到增加工作面,赶工期的目的,出现了汽车吊架梁、公铁两用架桥机架梁方式。此文通过调研,阐述这2种运架梁方式的施工工序及工艺,并针对现行铁路工程定额体系中的缺项部分进行分析与补充,希望能为今后的类似工程设计施工起到借鉴作用。     

信号安全技术在DS6-60计算机联锁系统中的主要应用

计算机联锁系统因其应用领域的特殊性,在满足铁路运营需求的同时,必须保证铁路运输的安全。因此对计算机联锁系统的安全性有较严格的要求。广义的信号安全技术包含故障-安全技术、可靠性和易维护性等方面。DS6-60型计算机联锁系统是基于故障-安全技术研发的通过欧标认证的铁路信号安全控制系统。阐述了DS6-60型计算机联锁系统各个环节的主要安全技术应用。     

Full six degrees of freedom coupled dynamic simulation of ship collision and grounding accidents

By taking advantage of the user-defined load subroutine (loadud) and the user common subroutine (usercomm) in LS-DYNA, the authors proposed a new coupled approach for simultaneously calculating structural damage and the planar 3DOF ship motions in ship collisions. The coupled procedure aimed at predicting the detailed structural damage together with reasonable global ship motions. This paper extends the method to consider the full 6DOF ship motions; thus, ship collision as well as grounding accidents can be properly handled. This method is particularly useful for design purposes because the detailed ship hull profile is not needed.A traditional ship maneuvering model is used for the in-plane surge, sway and yaw degrees of freedom with a series of nondimensional coefficients determined from experiments. It is assumed that the out-of-plane degrees of freedom are not coupled with the in-plane ship motions, and there is no coupling among roll, pitch and heave motions. The implementation is verified through free decay tests, and the obtained natural periods show good agreement with theoretical results.Several collision and grounding cases are simulated in which a supply vessel crashes into rigid plates with different orientations. The effects of the roll motion, the heave and pitch motions and the full 6DOF motions are studied. The results are compared with those from a 6DOF decoupled method. Ship motions through the proposed method compare reasonably well with SIMO results. It is found that several consecutive impacts may occur in the simulation of one collision case due to the periodic motions. This is not taken into account in the decoupled method, which makes this method unconservative.