液力变矩器泵轮流场数值分析

应用计算流体动力学(CFD)方法，采用非结构网格和稳态交互面技术，模拟了液力变矩器三维内流场，并与试验相对照，验证了数值模拟的正确性。分析了泵轮进口、中弦面、出口面速度场和压力场，以及泵轮流道流场形态及流场形成的机理。     

基于效率最优的四驱纯电动转矩分配仿真分析

文章针对前、后双电机动力分布式纯电动汽车,以优化能量消耗为目标,如何合理的动态分配前、后轴转矩的问题进行了研究。首先依照制动法规、驱动电机动态响应和车辆纵向平顺性等要求,提出切实可行的分配计算与优化方法,并且区分驱动和制动两种工况。之后采用循环工况仿真验证的方法,进行能耗分析。通过与固定分配方法结果的对比,验证了所提分配方法有效性。     

基于客户关联的纯电动轻卡驱动电机可靠性台架试验研究

为研究轻卡BEV驱动电机可靠性台架试验标准与实际客户的关联,文章基于整车CAN网络,采集实际客户日常行驶过程中的电机扭矩、转速等数据,通过Ncode软件计算出电机的扭矩谱。根据Miner准则,计算出电机20万公里的疲劳伪损伤。对比电机可靠性台架试验的电机伪损伤,确定电机台架试验标准是否满足客户需求。     

基于光纤光栅的扭矩传感器

为了实现恶劣条件下对扭矩的精确稳定测量,设计并实现了一种新型的基于光纤光栅的扭矩传感器。为克服扭矩测量系统易受外界影响的缺点,设计了光纤光栅全桥光路,实现了温度和弯矩的自动补偿。通过扭矩标准装置加载试验和水下环境加载试验分别测试了其测量精确度以及水下工作性能。结果表明,该光纤光栅扭矩传感器的最大非线性误差、重复性以及水下工作稳定性均达到0.1%以内,说明该传感器不但具有良好的测量精度,而且能够在船用环境等恶劣扭矩测量条件下较好地工作。研究结果为船用环境中扭矩测量的研究与应用提供了重要参考。     

正确使用挤压丝锥加工螺纹孔

利用挤压丝锥加工螺纹孔可提高产品质量，列举了在加工时因使用方法不当而存在的一些问题，介绍了利用挤压丝锥加工的前提条件。工艺参数的选择。以及怎样根据被加工螺纹孔的材质来选择不同形式的挤压丝锥及润滑方式。     

液力变矩器计算机辅助设计与制造

本文简述了液力变矩器设计与制造的研究和发展，以及计算机在液力变矩器设计与制造行业的应用，指出了存在的问题；建立了液力变矩器计算机辅助设计与制造的一体化系统；实现了液力变矩器性能预估、叶形判断与叶栅系统入，出口参数计算的有机统一。     

Performance estimation model of a torque converter part I: Correlation between the internal flow field and energy loss coefficient

The objective of this paper is to improve the performance estimation model of the internal flow field of a torque converter. Compared with performance experiment results, the converter based on the one-dimensional model does not satisfy the performance requirements demanded in practice. Therefore, we need to develop more predictable and reliable performance estimation models. In order to obtain shape information on three-dimensional blade geometry, a process of reverse engineering conducts a torque converter assembly, impeller, turbine and stator. In addition, a CFD simulation including mesh generation and post-processing was carried out to extract equivalent parameters from the internal flow field. The internal flow field can be explained by analyze the correlation between a performance estimation model and CFD analysis. The equivalent performance model adopts the variation of energy loss coefficients for a given operating condition according to the application of a changing energy loss coefficient by the least mean squares method. The estimated equivalent model improves the agreement in performance between experiments and the theoretical model. This model can reduce the error to within about 3 percent. Furthermore, this procedure for predicted performance achieves eminence in the estimation of the capacity factor.     

Effect of handling characteristics on minimum time cornering with torque vectoring

In this paper, the effect of both passive and actively-modified vehicle handling characteristics on minimum time manoeuvring for vehicles with 4-wheel torque vectoring (TV) capability is studied. First, a baseline optimal TV strategy is sought, independent of any causal control law. An optimal control problem (OCP) is initially formulated considering 4 independent wheel torque inputs, together with the steering angle rate, as the control variables. Using this formulation, the performance benefit using TV against an electric drive train with a fixed torque distribution, is demonstrated. The sensitivity of TV-controlled manoeuvre time to the passive understeer gradient of the vehicle is then studied. A second formulation of the OCP is introduced where a closed-loop TV controller is incorporated into the system dynamics of the OCP. This formulation allows the effect of actively modifying a vehicle's handling characteristic via TV on its minimum time cornering performance of the vehicle to be assessed. In particular, the effect of the target understeer gradient as the key tuning parameter of the literature-standard steady-state linear single-track model yaw rate reference is analysed.     

Open Server在铁路客票发售和预订系统中的应用

作者简要介绍了ＳＹＢＡＳＥ环境下有关Ｏｐｅｎ Ｓｅｒｖｅｒ编程中的一些基本概念、编程经验等，并以《铁路客票发售和预防系统》２．０版本软件为Ｏｐｅｎ Ｓｅｒｖｅｒ的应用实例。     

5kNm立式参考式扭矩标准装置研究

本文介绍了5kNm立式参考式扭矩标准装置的结构形式和组成，并详细描述了有关参考式装置的结构设计及有限元分析、扭矩加载系统以及装置的超限保护机构的研究过程和研究成果。通过不确定度评定，装置的扩展不确定度Urel=0.05%（包含因子k=2）。参考式扭矩标准装置以其高性价比和快速校准的特点，满足了广大计量机构扭矩传感器校准的需求。