基于无人机的高层住宅最后“一百米”配送优化

针对城市高层住宅顾客对上门配送服务的需求，借助无人机停放平台，考虑包裹异质性以及无人机在不同配送阶段的精确能耗，构建以无人机飞行成本和能耗成本最小为目标，以无人机容量、电池组容量等为约束的高层住宅无人机上门配送模型，解决“垂直位置最后一百米配送”问题。基于此模型，设计带变邻域下降(VND)搜索的混合蚁群算法(HACO-VND)，引入4个算子进行变邻域下降搜索，为了提高算法的求解性能，提出两种局部搜索算子组合，根据顾客点数量使用不同的算子组合。实验结果表明，HACO-VND算法较CPLEX在求解精度与求解时间方面更优，特别是在大中型算例中表现出较佳性能。参数分析表明，高层住宅楼层数越多，无人机单次 飞行的能耗利用率越大，无人机容量与电池组容量共同对配送方案产生影响。为以后无人机送货上门服务方面的研究提供参考和思路。     

Economic and ecological optimization of electric bus charging considering variable electricity prices and CO2eq intensities

In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses.In this study, we present a new methodology for optimizing the vehicles’ charging time as a function of the parameters CO_2eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO_2eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle.In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6% compared to charging at a fixed electricity price. The savings potential of CO_2eq emissions is similar, at 14.9%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO_2eq intensity is also low in this period, but midday charging leads to the largest savings in CO_2eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5% CO_2eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.     

PHEV能量管理策略研究

针对一款串联型插电式混合动力公交车,文章基于MTLALB建立整车和各部件数值模型。在中国典型城市公交工况下,建立基于全局优化的DP策略,并与CD-CS策略和PMP策略进行能耗对比分析。结果表明:(1)基于CD-CS策略的后期SOC在一定范围内波动,DP策略与PMP策略的SOC轨迹近似呈线性变化。(2)CD-CS策略较DP策略的能耗成本高22.68%,PMP策略比DP策略的能耗成本高0.30%。DP策略与PMP策略可以合理分配能量源,实现全局最优,但DP策略相比PMP策略计算量大。     

比例先行数字PID控制器的仿真

主要描述了通过比例先行的PID控制器,使用采样控制系统对惯性热工对象进行控制这一过程的仿真,并对仿真结果进行了简单的分析.     

汽车车身计算机辅助设计系统的集成环境

本文分析了计算机辅助车身设计的特点，指出必须集成的观战构建车身ＣＡＤ系统，并给出了一车身身ＣＡＤ系统集成环境的组织结构。     

机车车辆动力学研究及发展

机车车辆动力学在最近10年得到迅速发展,考虑车辆—轨道耦合作用的耦合模型得到广泛应用。随着大跨距跨江铁路桥的建设,车和桥的耦合振动会引起接触网的振动,进而影响弓网的耦合振动。因此十分有必要开展接触网—受电弓—机车车辆—线路—桥梁耦合大系统动力学的研究。进行机车车辆动力学性能优化,必须首先确定机车车辆动力学三要素的优先关系,即运行的稳定性—安全性—平稳性,建立以列车为研究对象的模型,同时在模型中考虑机车车辆结构弹性和频变特征悬挂参数以及气流扰动的影响,进而进行灵敏度分析和参数优化。给出考虑频变特性的钢弹簧等效计算方法以及基于循环变量的列车系统动力学建模和计算方法,并验证了计算方法的有效性。     

单频GPS进行高精度线路测量和有轨车辆定位的有效方法

轨道线路测量和有轨车辆的定位常采用GPS定位技术。利用GPS单频接收机实现高精度快速定位的关键是提高GPS单频相位模糊度解算的效率和成功率。基于轨道线路垂直方向变化不大和有轨车辆沿一定线路行驶的特点,提出一种有效的单频相位模糊度解算方法。对GPS单频接收机提供的定位观测值进行粗差探测、修正和剔除等数据预处理,用低噪声和低多路径效应的载波相位观测值对码伪距观测值进行平滑处理,再用附加约束的方法估计双差模糊度实数解,以此为基础进行模糊度搜索固定。算例显示,该方法可提高模糊度实数解估计的精度和可靠性,缩小模糊度的搜索空间,使模糊度解算效率和成功率得到提高,有利于单频GPS接收机在高精度的线路测量和有轨车辆的定位中得到更广泛的应用。     

边际油田-WZ11—1N开发的工程策略

讨论了北部湾边际油田-WZ11-1N油田开发的工程策略，通过技术和经济上的综合分析，WZ11-1N油田采用了“三一”模式依托开发的成果，在应用涠洲地区成熟的、较先进的工程技术和开发经验的基础上，对依托平台／管线的处理工艺和寿命进行了详细的优化和校核，同时采用了电力组网新技术，达到了降低工程投资，提高油田收益的目的。另外在总体布置上为未来油田的依托开发预留了空间。     

船舶电站物理仿真实验装置典型故障分析

阐述了最新研制开发的船舶电站物理仿真实验装置的仿真原理,分析并排除了该装置调试运行过程中出现的典型故障,为电站操作人员提供参考。     

船舶锅炉水位控制仿真设计

从锅炉水位操纵模型进行建模，在WindowsNT环境下，利用VisualC＋＋编程对系统模型进行仿真，通过局域网下实时传递的数据实现锅炉水位模拟操纵的实时显示。