电缆铝护套连续包覆生产线协调运行控制系统的研究

分析了由活套形式构成的协高运行控制系统中因产品伸长和收线或放线半径变化对系统偏差调节过程的影响。论述了系统待定参数的合理值，并设计出能适应无法在是取半径收排系统电动机转速环与活套之间的配合电路。     

新一代分布式入侵检测系统机制

目前一些网络攻击技术已能突破防火墙系统，而入侵检测系统可以弥补防火墙的不足，因而得到了很快发展。介绍了新一代入侵检测技术，研究了分布式入侵检测系统的体系结构，并分析了协同在入侵检测中发挥的重要作用。最后展望了当前入侵检测系统的研究内容和发展方向。     

异地协同设计在勘察设计中的应用

本文以铁三院为例,对异地勘察设计作业模式从“现场设计”发展到“异地协同设计”的实践、存在的问题及解决方法进行了分析。文中提到的部分方法已经在铁三院生产、管理中得到应用,并取得了较好的效果;对需进一步改进的问题也提出了解决方案。     

编组站系统能力协调度的计算分析

以编组站实际作业过程为研究背景,基于编组站车流到达的不均衡性,将每一时段[ti-1,ti)的车流输入强度划分为3种不同的到达状态,结合对车流状态及编组站各系统能力的分析,得出编组站系统作业能力的协调度计算公式,最后,根据某编组站的实际车流量,计算出该编组站车流密集到达状态下的系统协调度。实例计算分析表明:所得出的协调度计算结果能够反映出编组站系统能力协调的薄弱环节,为提高编组站整体作业能力提供了一种新的方法。     

The symmetric intersection design and traffic control optimization

It is well recognized that the left-turning movement reduces the intersection capacity significantly, because exclusive left turn phases are needed to discharge left turn vehicles only. This paper proposes the concept of Left-Hand Traffic (LHT) arterial, on where vehicles follow left-hand traffic rules as in England and India. The unconventional intersection where a LHT arterial intersects with a Right-Hand Traffic (RHT) arterial is named as symmetric intersection. It is only need three basic signal phases to separate all conflicts at symmetric intersection, while it at least need four signal phases at a conventional intersection. So, compared with the conventional intersection, the symmetric intersection can provide longer green time for the left-turning and the through movement, which can increase the capacity significantly. Through-movement waiting areas (TWAs) can be set at the symmetric intersection effectively, which can increase the capacity and short the cycle length furthermore. And the symmetric intersection is Channelized to improve the safety of TWAs. The Binary-Mixed-Integer-Linear-Programming (BMILP) model is employed to formulate the capacity maximization problem and signal cycle length minimization problem of the symmetric intersection. The BMILP model can be solved by standard branch-and-bound algorithms efficiently and outputs the lane allocation, signal timing decisions, and other decisions. Experiments analysis shows that the symmetric intersection with TWAs can increase the capacity and short the signal cycle length.     

A copula-based approach for estimating the travel time reliability of urban arterial

Estimating the travel time reliability (TTR) of urban arterial is critical for real-time and reliable route guidance and provides theoretical bases and technical support for sophisticated traffic management and control. The state-of-art procedures for arterial TTR estimation usually assume that path travel time follows a certain distribution, with less consideration about segment correlations. However, the conventional approach is usually unrealistic because an important feature of urban arterial is the dependent structure of travel times on continuous segments. In this study, a copula-based approach that incorporates the stochastic characteristics of segments travel time is proposed to model arterial travel time distribution (TTD), which serves as a basis for TTR quantification. First, segments correlation is empirically analyzed and different types of copula models are examined. Then, fitting marginal distributions for segment TTD is conducted by parametric and non-parametric regression analysis, respectively. Based on the estimated parameters of the models, the best-fitting copula is determined in terms of the goodness-of-fit tests. Last, the model is examined at two study sites with AVI data and NGSIM trajectory data, respectively. The results of path TTD estimation demonstrate the advantage of the proposed copula-based approach, compared with the convolution model without capturing segments correlation and the empirical distribution fitting methods. Furthermore, when considering the segments correlation effect, it was found that the estimated path TTR is more accurate than that by the convolution model.     

Estimation of delay variability at signalized intersections for urban arterial performance evaluation

Urban arterial performance evaluation has been broadly studied, with the major focus on average travel time estimation. However, in view of the stochastic nature of interrupted flow, the ability to capture the characteristics of travel time variability has become a critical step in determining arterial level of service (LOS). This article first presents a stochastic approach that integrates classic cumulative curves and probability theories in order to investigate delay variability at signalized intersections, as a dominant part of the link travel time variability. This serves as a basis for arterial travel time estimation, which can be obtained through a convolution of individual link travel time distributions. The proposed approach is then applied in the estimation of travel time along one arterial in Shanghai, China, with abundant automatic vehicle identification (AVI) data sources. The travel time variability is evaluated thoroughly at 30-min intervals, with promising results achieved in comparison to the field measurements. In addition, the estimated travel time distributions are utilized to illustrate the probability of multiple LOS ranges, namely, reliability LOS. The results provide insights into how we might achieve a more reliable and informative understanding of arterial performance.     

基于交通信息的电动汽车制动策略及仿真

为了提高滑行能量回收经济性和踏板制动安全性、舒适性,基于交通信息,提出了电动汽车(EV)制动协调策略。分析了滑行制动的经济性,由交通信息和汽车行驶状态确定滑行制动强度;由道路信息和前方车辆信息建立汽车安全距离模型和碰撞预警策略,利用预警信息对滑行制动和踏板制动强度进行协调。对本策略进行仿真验证。结果表明:利用交通信息的滑行策略,在通行良好工况下综合能耗减少1.1%,拥堵工况下减轻驾驶员的制动疲劳;预警和协调策略避免了频繁预警,减小了紧急避撞触发几率。因此,利用交通信息能够辅助驾驶员进行更加合理的制动。     

重庆市国省干线公路灾害分析及防治措施

基于对重庆市国省干线公路灾害特性、类型、空间分布、原因机理进行研究,得出重庆市国省干线公路灾害发育,并且具有十分明显的分区发育特征的结论,分析了灾害发生的诱因,提出了充分重视地质勘查工作,合理规划和控制人类工程活动,严格控制工程质量,强化灾害分布预测,改进灾害时间预报的防治措施.     

公路隧道新设计规范中几个问题的探讨

设计规范作为行业强制性设计要求为依据,应是严谨、严肃的,但它同时又有一个不断发展和完善的过程.通过对新《公路隧道设计规范》(JTG D70—2004)使用中发现的与其它相关标准、规范的协调性、隧道建筑限界与内轮廓、钢纤维喷射砼等几个问题的探讨,起到抛砖引玉的作用,供同行研讨、参考.