列车通信网络研究现状及展望

介绍了列车通信网络的主要任务和列车通信网络的拓扑结构,阐述了列车通信网络(TCN)的发展历程及目前国内外列车通信网络的发展现状,并展望了列车通信网络技术的发展趋势。     

概述客车底盘管路技术

根据客车底盘总成的分类，简介客车底盘的管路及技术。     

Estimation of value of travel time reliability

In mode choice decision, travelers consider not only travel time but also reliability of its modes. In this paper, reliability was expressed in terms of standard deviation and maximum delay that were measured based on triangular distribution. In order to estimate value of time and value of reliability, the Multinomial and Nested Logit models were used. The analysis results revealed that reliability is an important factor affecting mode choice decisions. Elasticity is used to estimate the impacts of the different policies and system improvements for water transportation mode. Among these policies, decision maker can assess and select the best alternative by doing the benefit and cost analysis based on a new market share, the value of time, and the value of reliability. Finally, a set of promising policies and system improvement of the water transportation were proposed.     

机车空调逆变电源控制系统及其实现

根据机车空调电源的特点,设计了满足机车空调电源应用要求的逆变器控制系统,包括逆变器电路组成、工作原理、控制系统硬件及软件等,突出了系统变频运行、智能控制等特点.设计方案得到了试验证实,设计样机满足运用要求.     

旅游路网规划评价指标体系研究

在对旅游路网进行分析的基础上,从技术性能、社会效益、经济效益、环境效益4个方面进行研究,建立了旅游路网规划的评价指标体系,并对各项指标的含义进行探讨,分析了各指标值的确定方法,进而能方便地运用这些指标进行旅游路网规划的评价。     

尾气加热式水暖系统在城市客车上的应展

简述了城市客车尾气加热式水暖系统的特点、工作原理，提出在设计过程中的注意事项。     

The design of bus route systems — An interactive location-allocation approach

An interactive modelling approach is developed to solve the practical problem of bus route network design. Possible bus routes are identified with facilities which can be located. Zones or pairs of zones in the urban area are identified with customers who will be allocated to the established facilities. It is shown that the classical Set Covering Problem is useful under the assumption of fixed demand; the Simple Plant Location Problem is effective under the assumption of demand which is sensitive to the level of bus service provided.     

探讨客车不锈钢车身制造工艺

随着海外出口客车量的增加,海外车辆对于客车车身防腐的要求也越来越高。不锈钢材料在客车车身上应用技术日益成熟,为满足海外客车的防腐要求,不锈钢做为客车车身材料的应用也越来越广泛。本文主要阐述客车不锈钢材质选择、车身设计结构、车身制造工艺难点和控制。     

城市轨道交通新型车载信号设备以太网网关的设计

目前轨道车辆常用的串行控制总线面临总线阻塞和控制时间延迟等问题,以太网通信总线是未来发展方向。对车载信号设备与不同车载网络总线间的通信进行了阐述,分析MVB(多功能车辆总线)和以太网的报文,完成了MVB-TCP/IP通信模块的设计,实现以太网通信协议与MVB间的数据传输。     

悬挂式单轨车辆走行轮失效对曲线通过及运行平稳性影响的仿真分析

悬挂式单轨车辆走行轮在车辆运行中起到承载和传力的重要作用,其走行轮失效对悬挂式单轨车辆运行性能有重大影响。通过多刚体动力学理论建立悬挂式单轨车轨耦合动力学模型,仿真分析了不同工况下走行轮失效对单轨车辆曲线通过及运行平稳性的影响。仿真结果表明:空载状态下走行轮失效的悬挂式单轨车辆在曲线半径100 m的线路上限速为35 km/h,而满载状态下走行轮失效的车辆一直处于不安全状态,需要尽快行驶到就近站点疏散乘客;同侧走行轮失效对单轨车辆的影响趋势基本一致;在相同行车速度下,走行轮失效时竖向平稳性指标出现了部分数值超过3.0的情况,说明走行轮失效时车辆的运行平稳性会变差。仿真研究结果可为走行轮失效的悬挂式单轨车辆运行提供参考。