掘进机黏性渣土结泥饼机制及聚合物改良研究

针对掘进机在黏性地层中施工刀盘结泥饼的问题，以无锡地铁4号线某矩形顶管工程为例，通过添加不同质量的聚合物对不同含水率的渣土进行改良，测试改良前后渣土的黏附强度、不排水抗剪强度及高温环境下渣土的保水能力，并通过液塑限变化分析渣土改良的机制，借助泥饼形成风险分区图评估泥饼形成的风险与改良效果。研究表明： 1）添加聚合物和水对渣土黏附强度有一定影响，增大含水率能显著降低渣土的黏附强度，当渣土含水率为35%~45%时，添加聚合物能有效降低渣土的黏附强度； 2）含水率的增大会降低渣土的不排水抗剪强度，而添加聚合物能有效增强渣土的不排水抗剪强度，当添胶比达到0.15%后增强效果显著； 3）聚合物能提高渣土的液限和保水能力，保证渣土的流塑性满足施工需要； 4）结合泥饼形成风险分区图，比较渣土-金属界面的黏附强度和渣土的不排水抗剪强度，可以综合判断黏性渣土结泥饼的风险和改良效果。     

Fluxes of dissolved inorganic carbon in three estuarine systems of the Cantabrian Sea (north of Spain)

The diffusive and in situ fluxes of dissolved inorganic carbon (DIC) and total alkalinity (TA) have been measured and an estimation has been made of the water–atmosphere fluxes of CO₂ in three estuarine systems of the Cantabrian Sea during the spring of 1998. Each of these systems undergoes a different anthropogenic influence. The diffusive fluxes of dissolved inorganic carbon and total alkalinity obtained present values ranging between 0.54–2.65 and 0.0–2.4 mmol m⁻² day⁻¹, respectively. These ranges are in agreement with those of other coastal systems. The in situ fluxes are high and extremely variable (35–284 mmol TA m⁻² day⁻¹, 43–554 mmol DIC m⁻² day⁻¹ and 22–261 mmol dissolved oxygen (DO) m⁻² day⁻¹), because the systems studied are very heterogeneous. The values of the ratio of the in situ fluxes of TA and DIC show on average that the rate of dissolution of CaCO₃ is 0.37 times that of organic carbon oxidation. Equally, the interval of variation of the relationship between the benthic fluxes of inorganic carbon and oxygen (F_DIC/F_DO) is very wide (0.3–13.9), which demonstrates the different contributions made by the processes of aerobic and anaerobic degradation of the organic matter, as well as by the dissolution–precipitation of CaCO₃. The water–atmosphere fluxes of CO₂ present a clear dependence on the salinity. The brackish water of these systems (salinity<20), where maximum fluxes of 989 mmol m⁻² day⁻¹ have been estimated, act as a source of CO₂ to the atmosphere. The more saline zones of the estuary (salinity>30) act as a sink of CO₂, with fluxes between −5 and −10 mmol m⁻² day⁻¹.     

福塔纤维沥青混凝土性能研究

福塔纤维（FORTA AR）是一种新型的聚合物有机纤维，它由聚丙烯（Pnlypropylene）和芳纶（Keylar）按照质量比3：1混合而成。对掺加0．045％福塔纤维、0．3％的德兰尼特纤维（Dolanit）以及不加纤维的沥青混合料的高温稳定性、低温抗裂性、以及水稳定性等路用性能进行了研究，结果表明福塔纤维沥青混合料具有优良的路用性能；继而对福塔纤维改善沥青混合料路用性能的机理进行了分析。     

生活小区管道直饮水的工艺及经济分析

分析了生活小区管道直饮水的净水工艺,对工艺流程各单元的原理和作用进行了阐述,并进行了经济分析,和桶装直饮水比较,管道直饮水的价格较低,表明生活小区管道直饮水系统有较大的发展空间。     

Organic carbon budget for the Gulf of Bothnia

We calculated input of organic carbon to the unproductive, brackish water basin of the Gulf of Bothnia from rivers, point sources and the atmosphere. We also calculated the net exchange of organic carbon between the Gulf of Bothnia and the adjacent marine system, the Baltic Proper. We compared the input with sinks for organic carbon; permanent incorporation in sediments and mineralization and subsequent evasion of CO₂ to the atmosphere. The major fluxes were riverine input (1500 Gg C year^− 1), exchange with the Baltic Proper (depending on which of several possible DOC concentration differences between the basins that was used in the calculation, the flux varied between an outflow of 466 and an input of 950 Gg C year^− 1), sediment burial (1100 Gg C year^− 1) and evasion to the atmosphere (3610 Gg C year^− 1). The largest single net flux was the emission of CO₂ to the atmosphere, mainly caused by bacterial mineralization of organic carbon. Input and output did not match in our budget which we ascribe uncertainties in the calculation of the exchange of organic carbon between the Gulf of Bothnia and the Baltic Proper, and the fact that CO₂ emission, which in our calculation represented 1 year (2002) may have been overestimated in comparison with long-term means. We conclude that net heterotrophy of the Gulf of Bothnia was due to input of organic carbon from both the catchment and from the Baltic Proper and that the future degree of net heterotrophy will be sensible to both catchment export of organic carbon and to the ongoing eutrophication of the Baltic Proper.     

聚合物改性水泥混凝土路面的施工工艺

结合实际施工经验，对聚合物改性水泥混凝土路面的施工准备，混合料拌和、运输、摊铺及养生等环节进行了论述，提出了在施工中应注意的事项和完整的施工工艺方案。实践证明，聚合物改性水泥混凝土路面性能良好．成本较低，符合环境友好、资源节约型路面的理念，具有良好的社会效益和经济效益。     

地铁限界问题探讨

分析地铁限界中抗侧滚扭杆对车辆动态包络线的影响及车辆与站台间隙问题,并提出在标准中增加相关内容的建议。     

CRH6型城际动车组抗侧滚扭杆装置的研制

介绍了抗侧滚扭杆装置工作原理,从抗侧滚扭杆设计方案、受力分析、刚度计算、强度分析等方面阐述CRH6型城际动车组抗侧滚扭杆装置。试验结果表明:该型抗侧滚扭杆装置的结构、刚度、强度及制造工艺等完全满足CRH6型城际动车组抗侧滚扭杆的运用要求,经过1000万次疲劳试验,该装置未发生任何问题。     

基于有限元的接触网下锚拉线设计方法

介绍了基于有限元的接触网下锚拉线设计计算方法,提出高速铁路用下锚拉线的解决方案。     

植筋技术加固原理及施工质量的控制

在工程施工过程中经常采用植筋这一后锚固方式,介绍了植筋技术的加固原理,总结了其施工质量关键控制点,提出了避免不利因素的几点建议和几个仍待解决的问题。