精细时程积分法在液压仿真系统中的应用

为了有效避免液压系统仿真过程中的刚性问题，引人精细时程积分法，相对于以往的计算方法，它不仅使仿真结果精确，且可以较为有效的避免刚性问题，取得了令人满意的效果。     

汔车运行材料在现代电控汽油轿车上的使用分析

汽车使用的燃料、润滑剂、特种液和橡胶轮胎等统称为汽车运行材料。分析汽车运行材料在现代电控汽油轿车上的使用情况，给出相应的使用原则及注意事项，可为维修人员和驾驶员等提供参考。     

支持协同设计的船舶设计过程模型研究

船舶设计过程模型是在网络环境下开展船舶并行和协同设计系统的基础.本文根据船舶设计的特点,提出了将船舶设计过程按照项目、设计任务和设计活动三个层次进行分解的方法,并给出了船舶设计过程模型形式化定义.该模型明确了设计任务间的并行、顺序和协同关系,可以直接按设计任务构成活动网络图进行规划、分析、管理等工作,使设计过程具有良好的可变更性和可控性.     

多值非线性系统的自适应控制

提出了带有多值非线性环节的线性离散系统的自适应控制算法，仿真实验的结果表明：该算法简单易行具有明显的优点，跟踪误差比采用一般的自适应控制算法时要小得多，且能保证闭环系统大范围近收敛。     

BITBUS结构及其在电气化复线渡线开关监控系统中的应用

本文提出在电气化铁路远动系统中采用高性能，低价格，灵活易用的通讯网络ＢＩＴＢＵＳ构成分层的分布式网络系统，用网络结构代替常规的双机加切换器的结构。既简化了系统结构了又成功地解决了系统资源的共与分配，并为系统以后可能的扩展与联网打下了基础。运用软件工程学的有关技术和方法开发系统软件，使系统结构清晰，易于维护和扩充，本文针对电气化复线渡线开关监控系统的特点，给出了该系统采用的软，硬件方案及其实现过程。     

编组站驼峰车辆溜放速度控制系统的研究

以计算机和红外线传感器为主，研制了编组站驼峰车组溜放速度控制系统，系统通过检测车辆溜放的速度，计算出所需制动力的大小，通过缓器对车辆溜放进行速度控制，并具有对解体车辆自动计数，各种故障报警等功能。     

Impacts of motor vehicle operation on water quality in the US – Cleanup costs and policies

This paper investigates the costs of controlling some of the environmental impacts of motor vehicle transportation on groundwater and on surface waters. We estimate that annualized costs of cleaning-up leaking underground storage tanks range from $0.8 billion to $2.1 billion per year over 10 years. Annualized costs of controlling highway runoff from principal arterials in the US are much larger: they range from $2.9 billion to $15.6 billion per year over 20 years (1.6–8.3% of annualized highway transportation expenditures). Some causes of non-point source pollution were unintentionally created by regulations or could be addressed by simple design changes of motor vehicles. A review of applicable measures suggests that effective policies should combine economic incentives, information campaigns, and enforcement, coupled with preventive environmental measures. In general, preventing water pollution from motor vehicles would be much cheaper than cleaning it up.     

Multiphysic modelling of railway vehicles equipped with pneumatic suspensions

This article presents a multidisciplinary approach of railway pneumatic suspension modelling: both multibody and pneumatic aspects are taken into account. The work aims at obtaining a realistic model of the secondary suspension and coupling it with a multibody model of a train. Various components of the pneumatic circuit such as bellows, tanks, pipes and valves are taken into account. The article focuses on the bellow-pipe-tank subsystem for which several modelling approaches are presented and compared. Differences between differential and algebraic models are highlighted, and an application-dependent choice between them is suggested. A complete model of the pneumatic circuit is then obtained and coupled with a multibody model of the train. As a result, the behaviour of a suburban train equipped with a pneumatic secondary suspension is analysed, in particular undesired oscillating motions which affect the comfort. Topological modifications and improvements of the suspension are also investigated and discussed.     

ROV—遥控潜水器数据传输系统

本文介绍了系缆遥控潜水器（ROV）数据传输系统的信息容量、速率和水中运动载体的时间响应；分析了半双工传输系统与时钟节拍；交替使用8位、12位模拟量数字转换，保证了ROV运动控制精度．在实行水面、水下信息通信的数据传输系统中，由于用绞线对替代了诸多导线，缩小了脐带电缆直径，减少了脐带电缆水中运动时受到的阻力，因而提高了系缆遥控潜水器操纵机动性和下潜深度．