基于无人机的高层住宅最后“一百米”配送优化

针对城市高层住宅顾客对上门配送服务的需求，借助无人机停放平台，考虑包裹异质性以及无人机在不同配送阶段的精确能耗，构建以无人机飞行成本和能耗成本最小为目标，以无人机容量、电池组容量等为约束的高层住宅无人机上门配送模型，解决“垂直位置最后一百米配送”问题。基于此模型，设计带变邻域下降(VND)搜索的混合蚁群算法(HACO-VND)，引入4个算子进行变邻域下降搜索，为了提高算法的求解性能，提出两种局部搜索算子组合，根据顾客点数量使用不同的算子组合。实验结果表明，HACO-VND算法较CPLEX在求解精度与求解时间方面更优，特别是在大中型算例中表现出较佳性能。参数分析表明，高层住宅楼层数越多，无人机单次 飞行的能耗利用率越大，无人机容量与电池组容量共同对配送方案产生影响。为以后无人机送货上门服务方面的研究提供参考和思路。     

矩形顶管关键技术研究现状及发展趋势探讨

首先，对矩形顶管技术的发展历程及其国内外研究现状进行综述，介绍当前矩形顶管技术主要的应用场景，并结合顶推力预测、注浆减阻、背土效应演化机制和控制对策、顶进过程中的地层响应模式和沉降计算、工作面稳定性评估等关键技术问题，对矩形顶管的理论研究进展进行回顾和讨论。其次，根据矩形断面掘进机的结构形式和切削方式，对国内外矩形顶管掘进机的开发现状及其分类进行介绍。最后，归纳当前矩形顶管在装备及工程应用领域面临的技术挑战，探讨矩形顶管技术的发展趋势，对矩形顶管装备智能化，矩形曲线顶进，长距离、大断面及复合地层等复杂场景下的矩形顶管技术进行展望。     

基于精准供给教学团队建设的路径与成效--以广东生态工程职业学院林业技术专业群为例

教学团队的建设是职业教育的关键,高质量的师资力量能够明确人才培养目标、保证教学质量、推动专业建设、实现人才的精准供给。文中以广东生态工程职业学院林业技术专业群为例,基于精准供给的视角,总结了教学团队建设的路径:一是构建合理的团队结构;二是建立团队带头人管理机制;三是建立"传帮带"培养模式;四是推进校企合作机制;五是构建技能学习型团队;六是强化信息化教学。实践证明,加强教学团队的建设,对促进专业的发展、实现人才精准供给具有积极的作用。     

新型零航速矢量减摇系统研究

针对海洋科研平台、科考船等减摇系统的快速响应性工作需求,在螺旋桨推进器基础上开发了一种零航速矢量减摇系统。本文介绍系统机构设计及其工作原理,结合耐波性计算分析获取船舶横摇规律,采用滑台搭载重物往复移动方式,模拟船舶规则横摇以获得规则波实验条件,并通过船模实验验证该减摇装置作用下的船舶横摇减摇效果。零航速规则波模拟实验研究表明,该减摇装置具有可控性强、易改装的特点,能够大幅提高船舶的耐波性,为后续工程试验船舶上安装该减摇系统奠定理论与实验基础。     

引汉济渭工程岭北TBM无扩大洞室刀盘边块更换技术

本文以陕西省引汉济渭工程岭北TBM施工段为依托,为解决TBM在狭小空间内较大部件更换维修困难难题,开展大直径TBM刀盘边块在狭小空间内更换技术研究。通过大量研究,创新性提出新刀盘边块更换方法——基坑法,即通过专用设备配合TBM固有性能,在无扩大洞室工况下完成刀盘边块更换。经岭北TBM刀盘边块更换实例证明,此方法操作简单、适用性高,尤其在狭小空间内更具有优越性,且能节省大量维修时间,有效提高施工工效,可为同类TBM施工提供有益借鉴。     

突涌地质隧道TSP法弹性参数判识研究

结合云南4座在建高风险隧道典型突涌实例,对不同不良地质发生突涌的地质情况及突涌段落地震波反射法(TSP)的预报成果进行总结,分析各类突涌发生的工程地质条件和地震波反射法物理参数,归纳隧道突涌地质特征,得出大规模突涌时地震波反射法物理参数中纵波速度V_p、横波波速V_s、纵横波速比V_p/V_s和泊松比σ四项参数的判断标准:(1)富水时,V_p/V_s与σ都呈增长趋势,V_p/V_s变化率增长约5%以上,σ变化率增长约10%以上;(2)富水时,V_p/V_s由1.7→2.0变化,σ由0.25→0.3变化;(3)层状裂隙或构造破碎时,V_p均呈下降趋势;(4)存在裂隙及富水通道时,V_s均呈下降趋势;(5)V_p和V_s同时下降时,围岩破碎及地下水发育程度同步上升;(6)V_p上升、V_s下降时,围岩完整程度变化不大,地下水或裂隙发育程度上升。     

The uplift capacity of single-plate helical pile in shallow dense sand including the influence of installation

The helical pile has been used to resist the tension for a long time. However, the prediction of the uplift capacity of helical piles including the influence of installation is still a challenge in design. Based on the change in stress according to Mohr-Coulomb failure criterion, a simple theoretical method has been developed, which can calculate the uplift capacity of shallow pre-embedded circular plate anchors and the uplift capacity of helical piles installed by torque and compression. In order to analyse the influence of installation process of a single-plate helical pile on its uplift capacity and verify the theoretical model, a series of model tests have been conducted in dense saturated sand. The single-plate helical piles with different out diameters of helixes have been installed with different installation speeds, and then, the single-plate helical piles have been moved up monotonically. The test results show that the installation speed and the size of the out diameter of the helix have significant influence on the uplift capacity of the helical piles, and the results of the theoretical method have a good fit with the test results. Using this simple theoretical method, the designer can easily predict the uplift capacities of helical piles, which includes the influence of installation.     

基于可靠性方框图与蒙特卡洛仿真的船舶配电网可靠性分析方法

国船舶工业发展迅速,尤其在近几年迎来了跨越式的发展。船舶建设工业的发展能充分体现一个国家的经济和国防建设水平。但船舶配电网拓扑结构与陆上电网不尽相同,其运行环境非常恶劣,供电连续性和可靠性成为衡量船舶生命力的重要指标,同时也深刻影响大型船舶的平均寿命。因此,可靠性研究在船舶建设中发挥着越来越重要的作用。本研究以典型大型船舶中压配电网结构为研究对象,在全系统元件正常运行时相互独立的情况下,重点研究不可维修与可维修下的系统可靠度、MTBF、可用度、停运时间和失效数等,并进行详细的分析与讨论。首先,本文综合考察各种可靠性分析方法的适用性和准确性,选择利用可靠性框图、最小路集分析法计算并分析不可维修情况下系统的可靠度、平均故障间隔时间等可靠性指标；接着,本文简述了配电网的多种维修任务类型,并采用最小路集法与蒙特卡洛仿真法相结合的方法计算并分析可维修系统的可用度、停电时间、失效数等指标。本文研究结果对船舶配电网的设计、建造、运行和维修等具有积极的意义。     

考虑高铁客运产品间交叉弹性的动态票价策略

将由特定高铁列车所提供的起讫点间的旅客运输服务定义为单个高铁客运产品。随着高速铁路越来越"公交化",同一起讫点间客运产品间的可替代性越来越强,票价的调整有了更精细化的要求。用经济学中的交叉弹性理论描述客运产品间的可替代程度,用指数需求函数描述客运产品的需求与票价的关系,构建并求解高铁动态票价优化模型,对客运产品间不同可替代程度下的最优动态票价策略进行研究。结果显示:高铁客运产品间的可替代性会影响票价策略的选择,且客运产品间可替代程度的增加是否有利于客票收益的提高与可行折扣票价集合的选取有关。     

Costs of air pollutants from shipping: a meta-regression analysis

ABSTRACT

This study estimated the external cost of air pollution from shipping by means of a meta-regression analysis, which has not been made before. Three pollutants, which were included in most of the primary studies, were considered: nitrogen oxides (NO_x), sulphur dioxides (SO₂) and particulate matters with a diameter of max 2.5 micrometres (PM_2.5). All primary studies included damages of health and a majority added impacts on agriculture and estimated the cost of air pollutants by transferring cost estimates from studies on costs of air emissions from transports in Europe. Different regression models and estimators were used and robust results were found of statistically significant emission elasticities of below one, i.e. total external costs increase by less than 1% when emissions increase by 1%. There was a small variation between the pollutants, with the highest elasticity for PM_2.5 and lowest for NO_x. Calculations of the marginal external cost of the pollutants showed the same pattern, with this cost being approximately six times higher for PM_2.5 than for the other pollutants. Common to all pollutants was that the marginal external cost decreases when emission increases. Another robust result was a significant increase in the cost of studies published in journals compared with other publication outlets. These findings point out some caution when transferring constant external unit cost of air pollutant from shipping, which is much applied in the literature, and the cost functions estimated in this study could thus provide a complementary transfer mechanism.