铁路局集团有限公司技术规章管理平台设计方案研究

为科学、安全、有效地管理铁路生产的各技术环节,国铁集团、集团公司与各站段出台了涉及行车组织、客运组织、货运组织和铁路技术设备的运用、管理、维修等方面的技术规章,它是铁路运营和维护安全生产的基本保障。技术规章管理系统作为技术规章管理的信息化平台,是技术规章高效管理和高效运用的关键,是铁路基础管理工作的重要组成部分。本文在研究国内外情况和其他行业规章、文件管理系统后,依据集团公司实际工作需要,对集团公司技术规章管理平台方案进行研究,提出了一个更加方便、快捷、功能齐全且整体上相互协调的技术规章管理系统功能模块方案,作为指导集团公司技术规章系统建设的理论支撑。     

Economic and ecological optimization of electric bus charging considering variable electricity prices and CO2eq intensities

In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses.In this study, we present a new methodology for optimizing the vehicles’ charging time as a function of the parameters CO_2eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO_2eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle.In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6% compared to charging at a fixed electricity price. The savings potential of CO_2eq emissions is similar, at 14.9%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO_2eq intensity is also low in this period, but midday charging leads to the largest savings in CO_2eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5% CO_2eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.     

重载铁路四线高墩连续梁桥的设计

神瓦(神木—瓦塘)铁路冯家川车站大桥为重载铁路四线桥,主桥采用4线(65+100+65)m连续梁,最大墩高85 m.桥上线间距大,上下部结构横向尺寸较大,利用有限元分析软件BSAS,MIDAS/FEA对结构受力进行了计算分析.结果表明:在主梁梁高相同的情况下,采用单箱三室截面能更好地减小主应力,采用单箱双室截面增加腹板厚度对主应力的改善有限;多线桥桥墩横向尺寸较大,空心截面设置纵肋板能很好地提高高墩的局部稳定性;主梁及桥墩各项计算指标均满足规范要求.     

某款商用汽车电堆散热系统方案设计

从商用汽车电堆散热系统设计要求的实际角度出发设计系统原理图,从而进行计算匹配及选型零部件,对所选零部件进行仿真校核是否满足最初的设计要求,保证商用汽车电堆散热系统的正常工作。     

PHEV能量管理策略研究

针对一款串联型插电式混合动力公交车,文章基于MTLALB建立整车和各部件数值模型。在中国典型城市公交工况下,建立基于全局优化的DP策略,并与CD-CS策略和PMP策略进行能耗对比分析。结果表明:(1)基于CD-CS策略的后期SOC在一定范围内波动,DP策略与PMP策略的SOC轨迹近似呈线性变化。(2)CD-CS策略较DP策略的能耗成本高22.68%,PMP策略比DP策略的能耗成本高0.30%。DP策略与PMP策略可以合理分配能量源,实现全局最优,但DP策略相比PMP策略计算量大。     

福州东(樟林)车辆段工艺设计实践与创新

随着铁路建设的发展,福建省境内货车保有量大幅度增长,货车检修任务量增加迅速。樟林编组站位于福州枢纽,具备良好的扣车条件,在此新建1处货车车辆段将解决整个福建省货车的定期检修工作,而且能保障列车的运行安全,节约运输成本以及货车周转时间。福州东车辆段出入段线下穿既有温福铁路,有利于行车组织、运营安全。总图因地制宜全创新提出存车线(预检预修)与修车库贯通布置方案。充分梳理预检预修与架落车工艺,提出独立设置预检预修设施。论述抛丸除锈设备独立设置、转向架单臂悬挂检修流水线等修车库与联合车库创新设计,福州东(樟林)车辆段设计实现了创新理念和工程实际的协调统一。     

A new solution for two-bag air suspension system with leaf spring for heavy-duty vehicle

The design problem of a two-bag air suspension system for heavy-duty vehicles is formulated as a two-level (suspension system level and component level) optimization problem. At the suspension system level, optimal stiffness matrix of leaf spring, characteristics of damper and upper rod layout are determined by solving a multi-objective constrained optimization problem with response surface. At the component level, shape and thickness of the leaf spring are formed using cubic-spline curves to make the stiffness matrix as close to the target values cascaded from suspension system level as possible. Simulations using a vehicle model described by multi-body model and FEM of the novel leaf spring validate the suspension system thus derived.     

旧水泥混凝土路面加铺沥青混凝土面层勘测设计

旧水泥混凝土路面加铺沥青混凝土面层，当没有路线设计资料时，需对旧有路线进行拟合，重新进行勘测设计，以获得与旧有路线一致的路线设计资料，为旧水泥混凝土路面加铺沥青混凝土面层提供设计依据。结合工程实践，介绍了拟合旧有路线时勘测设计的内容和方法。     

柴油机曲轴的三维形状优化

采用序列线性规划算法对16V240ZJ柴油机锻钢曲轴圆角进行了形状优化设计。优化的目标函数是最大应力最小,设计变量是圆角附近设计单元控制节点的坐标。优化结果完全满足曲轴设计与制造工艺的要求。     

减振降噪技术的应用设计

本文针对某型号测量船主要噪声振动源采取相应技术措施进行减振降噪综合治理研究，其中主机采用低频大载荷隔振器的单层隔振、辅机采用浮筏隔振装置、机座采用局部阻尼处理等措施。由于该船采用了先进的浮筏技术及其他隔振措施，在提高船上测量系统读取数值精度的同时，大大改善了船上水声设备测绘工作环境和船员的生活环境，提高了该船的设备使用寿命和船员体力极限。本船自噪声在低航速时已淹没在海洋背景噪声之中。特别是该船减振降噪装置在系统的声学匹配设计方面取得了进展，经实船验证，效果良好，证明该设计方法可行，对减振降噪技术在各型舰船上的工程应用开发研究有一定借鉴作用。