新型DC 600 V列车供电系统输出电压振荡解决方案

新一代复兴号动力集中动车组列车供电柜,首次采用二电平PWM整流器输出DC 600 V为客车供电。由于负载前端串联EMI滤波器,在负载投入时供电柜的滤波电感和EMI电容发生振荡,引起输出电压振荡。文章为抑制输出电压振荡,对输出端并联RC吸收电路和滤波电感并联RC两种方案分别进行讨论和验证,通过对主电路结构分析,认为滤波电感并联吸收电阻方案为最优。最后通过仿真和试验验证所提方案的可行性和有效性。     

Economic and ecological optimization of electric bus charging considering variable electricity prices and CO2eq intensities

In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses.In this study, we present a new methodology for optimizing the vehicles’ charging time as a function of the parameters CO_2eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO_2eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle.In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6% compared to charging at a fixed electricity price. The savings potential of CO_2eq emissions is similar, at 14.9%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO_2eq intensity is also low in this period, but midday charging leads to the largest savings in CO_2eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5% CO_2eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.     

地铁临时支援供电中压环网方案研究

因征地拆迁等原因,地铁主变电所及电缆通道常因工期滞后而需临时支援供电。针对临时支援供电问题研究其中压环网方案,提出了系统运行方式及可靠性、压降要求、倒接可行性和经济性4方面评价标准。以武汉地铁2号线南延线为例,提出3种临时支援供电方案。分别阐述了每种方案的运行方式,计算了环网压降,研究倒接方案的可行性和经济性。通过综合比较,总结出各方案的优缺点,提出注意事项,为后续工程提供思路。     

某款商用汽车电堆散热系统方案设计

从商用汽车电堆散热系统设计要求的实际角度出发设计系统原理图,从而进行计算匹配及选型零部件,对所选零部件进行仿真校核是否满足最初的设计要求,保证商用汽车电堆散热系统的正常工作。     

船舶动力设备退化基线计算及预测方法

船舶动力设备在自身性能退化过程中的相当长一段时间内仍能完成规定功能,对具有重要特征参数或性能指标的船舶动力设备而言,若使用定基线进行健康状态评估会导致评估值连续较低甚至误报警问题。为了解决这一问题,以目标设备按性能退化时间序列采集的特征参数为研究对象,首先建立退化基线计算方法,利用滑动概率神经网络和性能可靠度与基线值间的转换函数获得目标设备的动态退化基线;然后建立ARMA预测模型获得预测参数,并与退化基线计算方法结合对退化基线发生动态变化的时间节点进行预测;最后利用海水泵对建立的方法可行性进行验证。结果表明,本文建立的退化基线计算方法能够获得动态基线,退化基线预测方法能够对动态基线的变化时间节点进行准确预测。     

地铁专用回流轨牵引供电系统应用方案

分析了常规地铁牵引供电系统采用走行轨兼做回流轨存在的问题,以及杂散电流腐蚀问题带来的严重危害。针对目前专用回流轨技术方案发展现状,推荐采用网轨混合牵引供电系统的应用方案。通过对该方案中重点问题的分析,推荐采用专用回流轨和接触网同位置设置电气分段的方案,在牵引供电上网点和回流点处设双极隔离开关;推荐在负极对地之间设置单向导通装置作为漏电保护装置;推荐设置绝缘监测装置对各区段的专用回流轨对地绝缘状况进行定期监测,以便及早发现绝缘薄弱点并清查处理。     

准比例谐振控制算法在三相逆变电源中的应用研究

非线性负载会在三相车载逆变电源系统中引入谐波,损伤用电设备。为了降低逆变电源输出电压谐波含量,文章研究了基于准比例谐振控制算法的谐波抑制方法 ,主要抑制电源输出的5次和7次谐波。通过仿真模型和实物试验,测试了传统瞬时控制方法和准比例谐振控制方法的差别。结果表明,准比例谐振控制方法既能消除输出电压中的特定次谐波,又可满足系统动态响应性能和稳态精度要求,具有良好的谐波抑制效果。     

Online channel strategies under different offline channel power structures for the Belt and Road of China

ABSTRACT

This paper explores the online channel strategies adopted by Chinese manufacturers with regard to the Belt and Road. It also investigates the effect of offline channel power structures and maritime transportation costs on online channel mode selection and pricing strategies. The offline channel power structures are classified into three types, namely, Chinese manufacturer Stackelberg (MS) structure, vertical Nash (VN) structure, and foreign retailer Stackelberg (RS) structure. Furthermore, a game model is developed among the Chinese manufacturer, foreign retailer, and cross-border e-tailer to investigate the interactions among offline channel power structures, maritime transportation costs, and Chinese manufacturers’ online channel mode selection. The results show that Chinese manufacturers’ preferences for the online agency selling mode increases correspondingly with the decrease in their market position and bargaining power. Moreover, foreign retailers can obtain higher profits in the online agency selling mode under the VN structure. However, the level of profit for foreign retailers depends on the intensity of their competition with cross-border e-tailers under the MS and RS structures. Finally, consumers in countries along the Belt and Road can obtain a higher surplus in the online agency selling mode under all of the structures.     

海上大直径超长HDPE管段沉放工艺

HDPE管段的沉放工艺直接影响管段水下对接的效率以及成功率,是HDPE管段水下安装工程中的重要环节。针对大直径超长HDPE管段的灌水沉放工艺进行系统研究,将理论分析与现场试验相结合,首次提出采用气囊配合"牺牲绳"控制管段灌水沉放的方法,并得出确定气囊数量的方法与原则,进而提出满足变水深条件下的大直径超长HDPE管的灌水沉放工艺。该工艺已成功应用于沙特吉赞JIGCC取排水工程大直径超长HDPE管段安装工程中,为今后类似工程的建设提供参考。     

我国电力机车及动力车通风系统

简要地说明了我国电力机车及动力车通风系统的发展情况，尤其是交流传动技术对我国电力机车及动力车通风系统的发展的重要影响，同时，还详细分析了各种通风方式的特点，为电力机车及动力车通风系统简统化设计提供了多种选择模式。