现代船舶动力定位系统设计

围绕现代动力定位系统的设计问题,讨论系统的构建、数学建模、控制器设计和推力器的推力分配,重点给出了基于扩展Kalman滤波的动力定位LQG控制器设计算法。     

养生作用对硫沥青性能影响分析

硫磺部分替代传统石油沥青用于道路工程建设可减少石油沥青用量,降低施工能源消耗,促进工业废渣中硫磺的回收利用,具有较高的经济和环保价值。为探究硫磺掺量（质量分数）及养生作用对硫沥青（SEA）性能的影响,采用差示扫描量热仪（DSC）验证硫沥青中硫磺的重结晶现象,对养生前后硫沥青的基本物理性能和黏度进行分析,并采用动态剪切流变仪（DSR）和弯曲梁流变仪（BBR）对养生前后硫沥青的流变特性和疲劳性能进行评价,最后借助荧光显微镜（FM）观察养生前、后硫磺在沥青中的微观分布特性。研究结果表明：养生后高硫磺掺量的硫沥青DSC曲线出现吸热峰,硫沥青（特别是高硫磺掺量下）的劲度有所增加,因此对硫沥青进行养生使其性能稳定后再进行相关性能评价更具现实意义;硫磺掺量较低（≤ 10%）时,硫磺主要以溶解硫的形式存在于沥青中起到软化沥青的作用,因此沥青的低温变形能力有所改善,但其高温抗变形能力有所降低;当硫磺掺量较高（≥ 35%）时,硫磺主要以重结晶的形式悬浮在沥青中使沥青变硬,在增加沥青高温抗变形能力的同时也牺牲了其低温抗裂能力;硫磺掺量较低时,硫沥青黏度随着硫磺掺量的增加而降低;硫磺掺量较高时,硫沥青90℃和105℃黏度随着硫磺掺量的增加而增加,但硫沥青120℃和135℃黏度相差不大,同时硫磺加入最高可降低沥青的施工温度达20℃;线性振幅扫描（LAS）试验结果表明,养生后的硫沥青疲劳寿命比基质沥青长,其中35%硫沥青疲劳性能最佳;硫磺掺量进一步增加,硫沥青疲劳寿命缩短至与基质沥青相近;FM分析表明,硫磺掺量不高于5%时,硫磺全部溶解于沥青中,且养生后硫磺未重结晶,相应硫沥青无荧光性;硫磺掺量高于5%时,硫磺在沥青中分布均匀,养生后10%硫沥青中硫晶斑尺寸和面积显著增大,高硫磺掺量硫沥青中硫晶斑面积仅略有增加。     

平行调试方法的应用及安全风险分析

为了避免综合监控系统延伸线接入主线时功能调试对主线运营造成的影响,通过在主线停运期间用增设的临时中央级设备进行调试,在主线运营期间则恢复至原有中央级设备,当调试已完成且相应问题已基本整改时将延伸线正式接入主线。将其中搭建的临时中央级设备、延伸线临时接入主线、开展平行调试、骨干网接入和设备升级等重要步骤进行归纳总结,并针对项目实施前的主线通信网络发生功能性损害的安全风险,以及项目实施过程中的系统数据库出现紊乱、临时设备上电后超载跳闸、非调试期间人员误操作等的安全风险提出相应管控措施,进一步提高后续类似项目的施工效率和安全性。     

Hub location with flow economies of scale

A characteristic feature of hub and spoke networks is the bundling of flows on the interhub links. This agglomeration of flows leads to reduced travel costs across the interhub links. Current models of hub location do not adequately model the scale economies of flow that accrue due to the agglomeration of flows. This paper shows that current hub location models, by assuming flow-independent costs, not only miscalculate total network cost, but may also erroneously select optimal hub locations and allocations. The model presented in this paper more explicitly models the scale economies that are generated on the interhub links and in doing so provides a more reliable model representation of the reality of hub and spoke networks.     

考虑横向漂移的船舶路径跟踪自抗扰控制

针对船舶运动系统中内部动态不确定和外部干扰等问题,进行了欠驱动船舶路径跟踪的自抗扰方法研究。利用Backstepping设计参考航向角,并通过线性扩张状态观测器对流干扰和横向运动引起的横向漂移进行估计。其次,根据自抗扰算法对航向进行控制,采用线性扩张状态观测器对外界干扰及内部不确定项进行估计。最后仿真结果表明,在风流干扰下所设计的控制器仍能使船准确地跟踪上参考路径,验证了所提控制方案的有效性。     

囊式空气弹簧机械阻抗特性研究

根据小幅振动的线性叠加原理将囊式空气弹簧分成几个简单的可解析计算的规则区域,结合线性空气波动理论求解出空气弹簧内部声压场的分布。根据弹性薄壳无矩理论推导出旋转壳体状态向量的一阶常微分矩阵方程,利用齐次扩容精细积分法推导出壳体的传递矩阵,结合动力平衡方程求出空气弹簧在位移谐波激励下所受到的激励力,进而得出其机械阻抗。算例结果表明该方法合理可行,为运用近似解析法分析空气弹簧的阻抗特性提供了一种新的思路。     

基于船模水池试验的船舶顺浪纯稳性损失计算扩展模式

船舶顺浪航行的纯稳性损失研究,已成为国际航海界和国际海事组织(IMO)关注的课题之一.在Ю.И.涅查耶夫根据28艘渔船和运输船船模水池试验的船舶顺浪纯稳性损失计算方法的基础上,提出了扩展模式,扩大了其适用范围,并给出了大长宽比(船长/船宽)舰艇纯稳性损失的算例,同时实现了该扩展模式的程序化,生成了实用化的软件.最后通过与CFD试验方法和一般理论计算法所得结果的对比,验证了该扩展模式计算结果的可信度.     

基于扩张观测器的船舶动力定位系统反演滑模变结构控制

针对海洋平台船舶动力定位控制系统,结合反演滑模控制与扩张观测器的优势,提出一种基于扩张观测器的船舶动力定位反演滑模控制方法.考虑到系统存在未知外部干扰以及船舶模型参数不确定性的问题,将系统分为内环观测器和外环控制器分别设计,首先利用扩张观测器估计系统的未知状态及不确定项,然后在外环的反演滑模控制器中进行补偿,最后用Lyapunov方法证明系统的稳定性.通过船舶定点控制仿真实验表明,基于扩张状态观测器的反演滑模控制器使得船舶纵荡和横荡的位置及首摇角度逐渐保持在期望值,具有较强的鲁棒性和控制性,能够有效抑制传统滑模控制的抖振问题,有益于船舶工程应用.     

Dual extended Kalman filter for vehicle state and parameter estimation

The article demonstrates the implementation of a model-based vehicle estimator, which can be used for combined estimation of vehicle states and parameters. The estimator is realised using the dual extended Kalman filter (DEKF) technique, which makes use of two Kalman filters running in parallel, thus 'splitting' the state and parameter estimation problems. Note that the two problems cannot be entirely separated due to their inherent interdependencies. This technique provides several advantages, such as the possibility to switch off the parameter estimator, once a sufficiently good set of estimates has been obtained. The estimator is based on a four-wheel vehicle model with four degrees of freedom, which accommodates the dominant modes only, and is designed to make use of several interchangeable tyre models. The paper demonstrates the appropriateness of the DEKF. Results to date indicate that this is an effective approach, which is considered to be of potential benefit to the automotive industry.     

Real-time traffic state estimation in urban corridors from heterogeneous data

In recent years, rapid advances in information technology have led to various data collection systems which are enriching the sources of empirical data for use in transport systems. Currently, traffic data are collected through various sensors including loop detectors, probe vehicles, cell-phones, Bluetooth, video cameras, remote sensing and public transport smart cards. It has been argued that combining the complementary information from multiple sources will generally result in better accuracy, increased robustness and reduced ambiguity. Despite the fact that there have been substantial advances in data assimilation techniques to reconstruct and predict the traffic state from multiple data sources, such methods are generally data-driven and do not fully utilize the power of traffic models. Furthermore, the existing methods are still limited to freeway networks and are not yet applicable in the urban context due to the enhanced complexity of the flow behavior. The main traffic phenomena on urban links are generally caused by the boundary conditions at intersections, un-signalized or signalized, at which the switching of the traffic lights and the turning maneuvers of the road users lead to shock-wave phenomena that propagate upstream of the intersections. This paper develops a new model-based methodology to build up a real-time traffic prediction model for arterial corridors using data from multiple sources, particularly from loop detectors and partial observations from Bluetooth and GPS devices.