Economic and ecological optimization of electric bus charging considering variable electricity prices and CO2eq intensities

In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses.In this study, we present a new methodology for optimizing the vehicles’ charging time as a function of the parameters CO_2eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO_2eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle.In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6% compared to charging at a fixed electricity price. The savings potential of CO_2eq emissions is similar, at 14.9%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO_2eq intensity is also low in this period, but midday charging leads to the largest savings in CO_2eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5% CO_2eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.     

考虑高铁客运产品间交叉弹性的动态票价策略

将由特定高铁列车所提供的起讫点间的旅客运输服务定义为单个高铁客运产品。随着高速铁路越来越"公交化",同一起讫点间客运产品间的可替代性越来越强,票价的调整有了更精细化的要求。用经济学中的交叉弹性理论描述客运产品间的可替代程度,用指数需求函数描述客运产品的需求与票价的关系,构建并求解高铁动态票价优化模型,对客运产品间不同可替代程度下的最优动态票价策略进行研究。结果显示:高铁客运产品间的可替代性会影响票价策略的选择,且客运产品间可替代程度的增加是否有利于客票收益的提高与可行折扣票价集合的选取有关。     

多模式交通环境下上海居民职住选择行为

随着城市尺度不断扩张,由职住分离带来的长距离、长时间通勤交通问题日益严重。为研究多模式交通环境上海居民职住位置选择行为及其影响因素,基于网络问卷调查数据、上海市路网数据及房价数据,构建方式选择与目的地选择联合模型,按照选择次序,分析各出行方式的服务水平和房价等变量对居住地和工作地的选择影响。结果表明,居民倾向于选择通勤距离近、交通可达性良好、房价低和人文生活环境较好的小区工作生活,同时年长者和低收入群体对通勤距离和房价更敏感。     

O′ZBEKISTON型机车单元制动器的技术难点及解决方案

文章分析了装用抱轮缘铸铁闸瓦的O′ZBEKISTON型机车用单元制动器的研制技术难点,通过理论分析提出了解决方案。型式试验及线路运行实践证明该单元制动器能够满足O′ZBEKISTON型机车的运用要求。     

坞式舰船压载系统研究

对坞式舰船压载系统设计中需考虑的稳性、作业时间、注排水方式等问题进行了分析研究,可供有关设计人员参考.     

薄板激光填丝焊工艺研究

研究了一种新的焊接工艺方法——激光填丝焊，改进和设计了该工艺专用的送丝机及其位置精密调整机构，并对其主要工艺参数进行了初步试验与分析，提出了确定送丝速度的经验公式。激光填丝焊是对接焊缝存在较大间隙条件下直用激光焊的一种新工艺，它可以提高激光焊接件在实际生产中装配加工精度。     

地铁屏蔽门系统构成分析

文章较详细地介绍了广州地铁使用的屏蔽门系统,重点是它的机械和电气部分的组成和作用.     

从大莱龙铁路投标谈如何提高报价内涵质量

通过复核工程数量、合理计算运杂费和灵活编制补充单价,以及在认真检查计算过程中存在的问题等方面,简述提高报价内涵质量.     

舰船全电力推进系统模拟研究

介绍了舰船全电力推进系统的优点、典型国外电力推进系统和我校建 船舰电力推进模拟研究系统的组成及其工作原理。重点研究了螺旋奖负载模拟装置的硬件组成、相关的计算及控制方法。在此基础上，对采用电力推进舰船的运动进行了半物理仿真，取得了较好的效果。     

灌注桩深基坑的有限元计算及影响因素分析

对苏州市轨道交通2号线金民东路站深基坑使用灌注桩作为支挡结构的开挖、支护施工进行了有限元数值模拟,据此分析了灌注桩内力、水平侧移等随施工过程的变化以及主体结构的内力情况,并研究了灌注桩刚度、地基土刚度对支护结构侧移和弯矩的影响,对实际施工起到一定的指导作用。