Development and prospects of initial alignment method for strap-down inertial navigation system北大核心CSCD

Initial alignment technology is directly related to the navigation accuracy and startup time of the strap-down inertial navigation system (SINS), and has always been regarded as a challenging focal point in the research field of inertial navigation. This paper makes a comprehensive survey of SINS initial alignment technology, briefly introduces the basic principles of initial alignment without latitude, coarse alignment with known latitude and precise alignment, and points out their advantages, disadvantages and applicable conditions. The research and effects of existing initial alignment error suppression techniques are then analyzed and discussed. Finally, according to the problems of existing initial alignment methods and the development requirements of the carrier, the future research direction of SINS initial alignment technology is predicted. © 2022 Journal of Clinical Hepatology. All rights reserved.     

Influence of initial heeling angle on ship roll motion response北大核心CSCD

[目的]系统地研究初始横倾角对随机横浪下船舶横摇运动响应的影响。[方法]以路径积分法为基础,通过数值求解控制横摇运动微分方程概率属性的Fokker-Planck方程,得到横摇运动响应的概率分布。[结果]结果显示,初始横倾角对船舶横摇运动响应谱的影响有限,但对横摇角概率分布以及横摇运动响应极值分布的影响十分明显,且会造成船舶安全性的显著恶化。[结论]路径积分法可作为研究随机海浪下船舶横摇运动特性的有效数值方法。     

面向新型混合交通流的智能交叉口网络布局优化

考虑网联自动驾驶车辆(Connected Autonomous Vehicle, CAV)应用先进的车联网与自动驾驶技术，可以采用智能交叉口的组织形式，大幅提升交叉口的通行效率，为降低CAV与人工驾驶车辆(Human-driven Vehicle, HV)混行条件下城市交通系统的整体出行成本，提出智能交叉口在城 市交通网络中的布局优化问题，建立数学优化模型并求解。首先，基于对两类车辆行驶特性的分析，建立混合用户均衡模型，描述CAV与HV的路径选择行为；其次，从交通规划者的角度，以系统最优为目标，整合混合用户均衡模型，建立面向新型混合交通流的智能交叉口网络布局优化模型，并利用改进的遗传算法求解；最后，选取Sioux-Falls交通网络作为案例分析，验证模型与算法的有效性，并研究CAV渗透率变化对优化结果的影响。研究表明，智能交叉口在城市路网中的合理规划极大地提高了新型混行场景下城市交通系统的出行效率，同时，大幅降低了由于网联自动 驾驶单方面技术优势带来的CAV与HV的出行效率差距，增进了出行公平性。     

基于分段单孔反演的隧址区多断层地应力分布特征

目前，针对具有多个原位地应力测试钻孔的隧址区初始地应力场反演，往往一次性将全部实测值用以计算值的回归反分析，没有考虑到隧道纵向长度远超其他方向且钻孔分布较远的特点，单个钻孔表征的临近区域地应力分布特征或反演精度被其余钻孔实测值“拉低”，导致整体反演结果容易陷入局部优解。依托拉林铁路桑珠岭隧道、叙毕铁路斑竹林隧道、沿江高速火山隧道、木寨岭公路隧道等工程，采用多元线性回归法结合最小二乘法寻优准则，分析了隧址区仅有单个钻孔反演精度较高的原因，提出了对具有多个钻孔的隧址区分段并分别进行单钻孔回归反演的新方法。在此基础上，重点讨论了木寨岭公路隧道断层破碎带区域地应力分布特征。结果表明：分段单孔反演较多孔反演进一步提高了反演精度；地应力的分布在断层前后呈现出先急剧增大后急剧减小的特征；除自重应力与埋深存在一定关联外，两项水平主应力随断层间距或厚度的增大突变性加剧；断层之间间距、断层倾角、断层厚度均是影响地应力方向偏转大小的重要因素，断层之间间距或断层倾角越小、断层越厚，地应力方向偏转越显著。     

基于改进TOPSIS的城市客运综合交通枢纽评价

城市客运综合交通枢纽规划方案的优劣对城市综合交通系统的建设发展具有重大影响。为了提高城市客运综合交通枢纽规划方案评价的客观性和准确性,结合城市客运综合交通枢纽客流衔接换乘的系统分析,从多维角度出发构建了城市客运综合交通枢纽规划方案评价的多层次指标体系,在遵循方案评价基本原理及城市客运综合交通枢纽特点的基础上,提出了基于改进逼近理想点排序法的评价方法,用于城市客运综合交通枢纽方案的评价,建立城市客运综合交通枢纽综合评价模型。     

含初始变形船体加筋板有效宽度及剩余极限强度研究

为了评估舰船结构损伤后的剩余强度,对船体加筋板出现初始几何变形后,参与总纵强度的有效宽度和加筋板剩余极限强度进行研究。将加筋板受到垂直于平面压力后的变形,作为其初始几何变形,改变变形的方向和大小,利用有限元软件Ansys对加筋板结构进行线性和非线性分析。定义了板有效宽度计算方法,对不同变形方向和变形幅值时板的有效宽度和加筋板的极限强度进行对比分析,并拟合得到了计算板有效宽度和加筋板极限强度的经验公式。结果表明,初始几何变形会削弱加筋板结构的强度。在对损伤后船体结构强度进行分析和校核时,提出的经验公式可以直接用来计算板的有效宽度和加筋板的极限强度。     

Development and Deployment of Public Transport Policy and Planning in Taiwan

Over the past decade, the escalating roadway congestion and environmental deterioration due to heavy use of private vehicles have provoked the Taiwan government to realize the importance of public transport systems. Under the “carrot-and-stick” rationales, the government has formulated public transport policies and exercised a series of related initiatives by providing sufficient and higher quality of public transport services so as to attract more private vehicle users. In this paper, the planning philosophy and policy formulation of Taiwan’s public transport development are highlighted. The most important initiatives, including the Five-year Enhancement of Mass Transportation Program and the upgrading public transport schemes in the National Development Plan are examined. Based on previous experience and lessons, we point out the most challenging issues that the government will encounter. Suggestions for the future of public transport planning are also addressed.     

Aggregate expenditure elasticity for transport and communication in Australia

For the purpose of estimating Engel elasticity, one needs to find the best functional form among various alternatives. In this paper, a new function, which is called the double semi-log Engel function turns out to be the best functional form for the transport and communication items in Australia on the basis of the distance function (D²) criterion, and the non-nested hypothesis testing procedure. This function is then used to estimate total expenditure elasticity, and the percentage change in consumer demand due to changes in total expenditure and total expenditure inequalities; using the 1975–76 Household Expenditure Survey data. The results of the analyses demonstrate that transport and communication is a necessary item in Australia on the basis of two criteria, viz., its elasticity is not significantly greater than unity, and the percentage change in demand increases with a decrease of the total expenditure inequality [emphasised by Iyengar (I960)]. Policy implication of the analyses has also been discussed.     

沉箱箱壁计算分析和局部优化

采用结构计算程序AN SY S,对北方某港拟建的15万吨级矿石转水码头大直径圆沉箱箱壁进行了计算。对桥梁计算中通用的影响线加载程序进行修改,编制成适用于卸船机荷载的动态规划程序,并嵌入结构分析程序中,计算出最不利组合工况下的沉箱箱壁受力;同时参考AN SY S拓扑优化结果,对沉箱消浪孔形式和布置位置等进行了调整,计算分析后给出了受力性能更为合理的细部构造布置。     

乌鞘岭隧道千枚岩地层初期支护参数研究

研究目的:针对乌鞘岭隧道深层地段千枚岩地层,隧道开挖过程中,围岩产生大变形的特点,进行初期支护合理性的研究,提出有效的支护措施。研究方法:结合兰武二线乌鞘岭隧道岭脊地段千枚岩地层的设计施工,采用动态设计方法,根据千枚岩不同含量,确定试验段,布置量测断面,通过现场位移量测,分析总结深埋条件下,千枚岩地层变形特点和初期支护设计方法。研究结果:通过对隧道开挖过程中围岩变形和初期支护的研究,提出了千枚岩地层初期支护参数的建议方案,对同类工程的设计施工有一定的借鉴意义。研究结论:对于以千枚岩为主、围岩变形大的地层,采用长锚杆大刚度型刚支架,结合网喷纲纤维混凝土等初期支护措施,是控制围岩产生大变形的有效方法之一。