基于车辆自动定位数据的有轨电车运行效率分析与应用

结合有轨电车线路的现有车辆自动定位数据,分析有轨电车运行效率及其相关影响因素。其中,影响因素从站台、路段、交叉口3个方面进行考虑。定性分析了不同站台型式、站台位置、交叉口类型的属性特征,并量化不同路段的路段长度、所包含的交叉口个数,同时考虑了交叉口控制策略对有轨电车运行时间的影响。以某已运营的有轨电车线路为例,通过建立多元线性回归模型,从不同层面探究不同因素对已运营有轨电车线路运行效率的影响。最后用模型对有轨电车新建线路的运行效率进行预测,并提出建议。     

海洋核动力平台全频段舱室噪声预报与降噪方案研究

随着新规范对船舶及海上工作平台提出了更高要求，舱室噪声的控制及优化设计越来越受到人们的关注。本文首先对全频段舱室噪声预报软件——VA One软件统计能量分析理论及软件概况进行了阐述，其次应用该软件对海洋核动力平台进行几何建模与仿真计算。通过对舱室仿真计算结果与标准指标要求的对比分析，在设计阶段提出了海洋核动力平台舱室空气噪声综合治理降噪方案，该措施可以缩短建造周期、降低制造成本，提高海洋核动力平台的舒适性与安全性，具有十分重要的经济效益和社会效益。     

A signal decomposition method based on repeated extraction of maximum energy component for offshore structures

Contrary to most signal decomposition methods that usually decompose an original signal into a series of components simultaneously, a novel approach based on repeated extraction of Maximum Energy Component (MEC) is proposed. The approach starts from determination of the MEC referring to the estimated Power Spectral Density (PSD) function, and then represents the MEC by employing an exponential function to fit the original signal. By defining a stopping criterion based on two adjacent estimated PSDs, each MEC can be accurately extracted with an improved performance throughout the entire signal decomposition. To verify the proposed method, a single degree-of-freedom system subject to harmonic loads has been examined. Numerical results show that the analytical response can not only be decomposed into four MECs corresponding to the excitation and the system, respectively, but also provide an accurate estimation of natural frequency and damping ratio of the system. Meanwhile, by observing results from the Ensemble Empirical Mode Decomposition (EEMD), Variational Mode Decomposition (VMD) and Prony based on state-space model (Prony-SS), an improved decomposition accuracy has been achieved from the proposed approach. Furthermore, experimental data from the Norwegian Deepwater Programme and two sets of field-test data from one fixed offshore platform and an offshore wind turbine have been used to demonstrate the correctness of the developed signal decomposition method. It is noted that divergence in results by Prony-SS can be observed when a very large model order is used, while the proposed method provides the better decomposition and reconstruction of signals.     

积极开展牵引电气设备的绿色设计研究

阐述了开展绿色设计的重要意义,介绍了资源最佳利用原则、环境设计原则、产品结构设计原则、社会经济效益最佳原则以及绿色设计技术和方法的研究等.     

船舶主机冷却水系统的建模与节能型控制研究

在对船舶主机高温淡水冷却水系统的各主要器件建立各自的数学模型的基础上,对其整个系统建立了数学模型.然后以主机高温淡水冷却水系统作为研究对象,提出了在此系统中采用神经元自适应控制方式替代传统的PID(比例积分微分)控制方式进行水温调节,以达到改善控制并节约能源的目的.最后以仿真结果说明了神经元自适应控制方式具有良好的适应性与抗干扰性,它比PID控制方式更适用于主机冷却水温度调节系统.     

遂渝线无砟轨道综合接地系统钢轨电位及电流分布的分析

研究目的:结合遂渝线无砟轨道综合接地系统,对无砟轨道钢轨电位及电流分布进行分析计算,并得出相应的结论。研究结果:在回流系统无回流线和综合地线或有回流线无综合地线的情况下,钢轨电位将超过或接近120 V。因此,在对地泄露电阻较高的无砟轨道区段,应当在回流系统中进一步设置金属性回流通路(综合地线),以降低钢轨电位和接触电势。     

The design of bus route systems — An interactive location-allocation approach

An interactive modelling approach is developed to solve the practical problem of bus route network design. Possible bus routes are identified with facilities which can be located. Zones or pairs of zones in the urban area are identified with customers who will be allocated to the established facilities. It is shown that the classical Set Covering Problem is useful under the assumption of fixed demand; the Simple Plant Location Problem is effective under the assumption of demand which is sensitive to the level of bus service provided.     

单向非贯通节理岩体滚刀破岩 特性离散元模拟

相较于贯通节理,岩桥的存在使非贯通节理岩体受力破坏过程更加复杂。为探明其对破岩影响,通过采 用 PFC2D建立单向非贯通节理岩体滚刀破岩离散元模型,研究岩桥长度和倾角对岩体破碎模式、法向力、裂纹数 量及比能耗等参数的影响,揭示非贯通节理岩体滚刀破岩特性。研究发现：岩体以张拉破坏为主,节理对裂 纹扩展的“导向作用”明显,裂纹扩展方向总是趋向于和其距离最近的节理;竖向应力水平随节理倾角增加呈现 先增大后减小的趋势,在 45°倾角下达到最大值,应力区形状受到节理位置影响,两者具有一致性;完整岩体法 向力均值和峰值均大于节理岩体,节理对于破岩过程具有明显的促进作用;0°、60°、90°节理倾角下的比能耗值 明显低于其他节理组合,60°倾角下呈减小趋势,在岩桥长度为 25 mm 时取得最小值;0°、90°倾角下呈先减小后 增大趋势,在岩桥长度为 15 mm 时取得最小值。     

地铁车辆交流牵引电机负载试验装置的研制

对于架修阶段的地铁车辆交流牵引电机维修后,为了评价检修质量和牵引电机性能,需要对牵引电机进行负载试验,因此研制了地铁车辆交流牵引电机负载试验装置。该设备主要由安装基座、连接装置、电源柜、变频柜、发电柜、计算机检测控制系统等组成,试验装置的负载采用发电机,产生的能量反馈给变频器,形成闭路循环,节能环保。