铁路桥梁用超细粉煤灰高性能混凝土的试验研究

我国铁路桥梁工程建设中较少掺用粉煤灰,但粉煤灰混凝土在其他工程领域的应用已经证明其具有优良的耐久性能及长期性能。在本文研究中,突破现行规范,从材性试验的角度以30%左右的超细粉煤灰(UFA)等量取代水泥配制了铁路桥梁用的超细粉煤灰高性能混凝土,并对其力学性能、部分长期性能、水化产物以及水泥石形貌等进行了试验研究。试验结果表明,混凝土早期强度主要取决于W/C和UFA掺量,而后期则主要取决于W/B和UFA掺量;通过应力-应变全曲线分析可知,UFA高性能混凝土可采用现行规范设计;混凝土干缩、抗渗、抗裂性能等均优于基准混凝土;同时在微观测试分析基础上,综合考虑施工及养护条件等因素的变异,认为在实际应用中,UFA掺量以不超过30%为宜。     

大跨度混凝土连续梁桥长期下挠加固方案研究

针对某城市主跨为129 m的预应力混凝土连续梁桥运营7 a以来中跨不断下挠情况,在不中断交通的条件下,从箱室内加体外预应力、外加结构角度出发,分析不同加固方案对挠度控制的有效性及其对原结构的影响,以期为加固已下挠的连续梁、防止其继续下挠提供一种有效的加固方案.     

关于分段绝缘器运行问题的探讨

对分段绝缘器在运行过程中出现的问题和故障进行了详细的调查,从多方面分析了滑道烧损、绝缘失效、弓网剐碰产生的原因;对受电弓和分段绝缘器的结构、材料以及导流转换方式等进行了研究,并对分段绝缘器的工作条件、安装位置、检修要点、弓网匹配等方面提出了看法和改进建议。     

饱和软黏土循环累积孔压模型及地铁隧道路基长期沉降计算

不同围压和固结方式下,在进行上海地区第4层饱和软黏土不排水循环三轴试验及累积孔压影响因素分析基础上,引入修正动偏应力水平,建立循环累积孔压显式模型;并利用循环三轴试验结果验证模型合理性。提出交通荷载作用下软土地基长期运营沉降分析方法,并应用于上海地铁隧道路基长期沉降预测。该方法采用拟静力有限元计算循环累积塑性变形和孔压显式模型相结合的方式,所需计算参数易于确定;对其他循环荷载作用下软土地基长期沉降预测有借鉴作用。     

500kV超高压线路低空跨越条件下公路大桥桥梁架设的安全技术

通过对在500 kV超高压电线低空跨越条件下公路大桥架梁施工安全技术与组织管理措施的研究并实施,以采用架桥机架梁方案为基础,对500 kV超高压电线低空跨越下的架梁工况条件、高压感应电场的强度和电流进行计算与分析,对作业人员和设备的伤害状况作出了分析,并提出了保证作业人员、设备和电力设施安全的防护技术与组织管理措施。     

遗传算法在区段站到发线的应用研究

为解决车站到发线的合理运用问题，采用遗传算建立了到发线运用的染色体结构和适应度函数，对这种复杂的非线性组合优化问题进行了仿真。     

Analysis of cross effect on inherent deformation during the line heating process – Part 1 – Single crossed heating lines

This paper describes the effect of previous heating on inherent deformation by a subsequent heating line, more specifically, the case of two heating lines intersecting (crossing) each other. The paper has been divided into two parts. In the first part, the case of single crossed heating lines is studied in detail. The second part of the paper, discusses the case of more than one crossed heating lines. The novelty of the work lies in revealing the cross effect and how, factors such as, for example, the heating condition and the plate geometry, influence the resulting inherent deformation of crossed heating. In addition, relationships to easily get these influences are provided. The results are suitable for a wide range of heating conditions and plate thickness.     

Estimation of extreme significant wave heights and the associated uncertainties: A case study using NORA10 hindcast data for the Barents Sea

The reliability of an offshore structure is dependent on its response to the extreme wave climate; therefore, an adequate knowledge of the wave climate at a location is a prerequisite during design as well as in marine operations. This study aims to contribute to the knowledge of the extreme wave climate in the Norwegian Sector of the Barents Sea, using wave hindcast datasets from the Norwegian Reanalysis 10 km (NORA10) database for four locations.We have considered three commonly used methods for the estimation of extreme wave heights, that is, the initial distribution method, the peak over threshold method, and the annual maxima method. The parametric bootstrap concept is considered in the estimation of the epistemic uncertainty related to sample size. The estimated 100-year significant wave heights obtained from the three methods differ, and the degree of variability in the estimates varies, depending on the dataset. The epistemic uncertainty due to sample size is wider when considering the annual maxima method.The estimates obtained from the three methods show the importance of considering different methods and their associated uncertainties when estimating extreme wave values for design. While it is difficult to single out the best method among the three, the estimated values give knowledge of the possible range of the extreme significant wave heights at the locations. Generally, the datasets considered in this study suggest that the wave climate is less harsh further north compared to the southern region of the Barents Sea. The datasets do not suggest any temporal trends in the historical significant wave heights at any of the locations.     

保证路基长期稳定性的技术措施研究

路基长期稳定性是一个综合性的问题,要想通过设计或施工一劳永逸的解决,在技术上是困难的,在经济上也是不适宜的。只有通过对设计、施工、养护三者综合考虑,把握影响路基长期稳定性的关键因素,才能经济、合理地解决该问题,使公路更好地为经济建设服务。     

乾元公司铁路专用线场站模式探讨

目前,传统的铁路专用线建设模式是铁路专用线自接轨站接轨,通过区间正线引入厂区的建设模式,这种模式的区间正线受地形条件、厂区位置和沿线规划影响较大,这些影响将不可避免地导致铁路专用线建设工程投资的增加,如能根据运输性质考虑缩短区间正线长度,在接轨站旁边设装车作业站,将大大减少专用线工程投资.以乾元公司铁路专用线建设模式为例来研究铁路专用线场站模式,就如何在接轨站旁边设装车作业站,实现接轨站设备与铁路专用线共用进行探讨.