双自由度舵机执行机构冲击载荷的仿真分析

超高速水下航行体航行过程中工况复杂,在加速段速度跨度大,双自由度舵机执行机构承受了较大的瞬态冲击载荷,有必要对其韧性进行分析校核。本文分别建立旋转机构输出轴、减速箱体和展开机构最后一级齿轮副的多刚体动力学仿真模型,分析各机构在冲击载荷下的应力和变形情况,校核结构韧性的可靠性,同时对旋转机构输出轴进行模态分析。仿真与校核结果为机构优化设计提供参考依据。     

动车组拖车轮对振动性能分析

建立了多刚体和刚柔体耦合的高速动车组拖车整车动力学模型,通过对多种工况的数值计算,获得随机激扰下轴箱垂向加速度时间历程,结果表明车辆在高速运行时,随速度的提高,刚、弹性轮对的轴箱垂向加速度偏差增大;结合高速线路实测数据进行对比分析,弹性体轮对的结果与实测结果更吻合。     

刚柔耦合多体车辆操纵稳定性研究

利用多体动力学方法建立了基于ADAMS软件平台的整车刚柔耦合多体系统操纵动力学仿真分析模型。并分别对多刚体模型和刚柔耦合多体模型进行了“转向盘脉冲输入”、“ISO移线”仿真，分析了构件的柔性对汽车操纵稳定性的评价指标值的影响。     

计及移相角的多边形自耦变压器12脉波整流系统分析

多边形自耦变压器一定程度上减小了整流系统的体积,节约了变压器制造成本。为使多边形自耦变压器输出较大的二次侧电压值,优化多边形自耦变压器移相角,分析多边形自耦变压器移相角对12脉波整流系统输入侧电流谐波总畸变率,输出侧电压纹波系数,变压器、平衡电抗器、零序电流抑制器等效容量的影响;对比移相角在π/6、π/2时各个参数的值;提出适用于升压场合的多边形自耦变压器升压移相角;仿真实验验证了理论分析的正确性。同匝比时,多边形自耦变压器采用新移相角其输出电压幅值约为输入电压幅值1.4142倍,等效容量约为62.8%,较传统隔离式变压器等效容量小约37.2%。     

Dynamic simulation of train–truck collision at level crossings

Trains crashing onto heavy road vehicles stuck across rail tracks are more likely occurrences at level crossings due to ongoing increase in the registration of heavy vehicles and these long heavy vehicles getting caught in traffic after partly crossing the boom gate; these incidents lead to significant financial losses and societal costs. This paper presents an investigation of the dynamic responses of trains under frontal collision on road trucks obliquely stuck on rail tracks at level crossings. This study builds a nonlinear three-dimensional multi-body dynamic model of a passenger train colliding with an obliquely stuck road truck on a ballasted track. The model is first benchmarked against several train dynamics packages and its predictions of the dynamic response and derailment potential are shown rational. A geometry-based derailment assessment criterion is applied to evaluate the derailment behaviour of the frontal obliquely impacted trains under different conditions. Sensitivities of several key influencing parameters, such as the train impact speed, the truck mass, the friction at truck tyres, the train–truck impact angle, the contact friction at the collision zone, the wheel/rail friction and the train suspension are reported.     

大型船舶推进轴系扭振特性仿真和试验

基于多体动力学耦合理论结合有限元理论,以1艘大型船舶为研究对象,建立其推进轴系的刚柔耦合多体动力学仿真模型,对大型低转速推进轴系在工作中的扭振特性进行研究。在仿真计算的基础上,利用扭振测试系统对实船的扭振进行测量,并从多个谐次将轴系扭振的仿真计算值与试验测量值进行对比和分析。分析结果表明,通过仿真计算得到的轴系扭转振动变化趋势与实际测量值基本相符,验证了仿真模型的正确性和可行性。同时,通过Adams/Virbration模块分析了船体变形对轴系扭振的影响,证明了船体变形会导致轴系扭转振动增大。     

汽车动理学模型综述

随着汽车动态仿真的发展,产生了不同复杂程度的汽车动理学模型,主要分为集中参数模型和多体模型。在简要说明汽车动理学发腰过程的基础上,介绍了用集中参数模型法建立的动力传动系模型、路面模型以及研究汽车平顺性和操纵稳定性的整车模型,技术介绍了多体模型以及用有限元法和动态子结构法建立的仿直模型,最后提出了汽车动理学模型的发展趋势。     

列车动力响应的平稳性和各态历经性分析

研究列车动力响应的平稳性和各态历经性对寻求列车动力响应随机过程的统计规律具有重要意义.基于多体动力学理论,采用多体动力学分析软件Simpack建立国内某高速列车动车车辆的多体动力学模型.采用三角级数法模拟得到的轨道不平顺作为随机输入激励计算得到列车以不同速度行驶不同距离的动力响应时程样本序列.进一步运用平稳性检验方法中...     

Shared autonomous electric vehicle (SAEV) operations across the Austin,Texas network with charging infrastructure decisions

Shared autonomous vehicles, or SAVs, have attracted significant public and private interest because of their opportunity to simplify vehicle access, avoid parking costs, reduce fleet size, and, ultimately, save many travelers time and money. One way to extend these benefits is through an electric vehicle (EV) fleet. EVs are especially suited for this heavy usage due to their lower energy costs and reduced maintenance needs. As the price of EV batteries continues to fall, charging facilities become more convenient, and renewable energy sources grow in market share, EVs will become more economically and environmentally competitive with conventionally fueled vehicles. EVs are limited by their distance range and charge times, so these are important factors when considering operations of a large, electric SAV (SAEV) fleet.This study simulated performance characteristics of SAEV fleets serving travelers across the Austin, Texas 6-county region. The simulation works in sync with the agent-based simulator MATSim, with SAEV modeling as a new mode. Charging stations are placed, as needed, to serve all trips requested (under 75 km or 47 miles in length) over 30 days of initial model runs. Simulation of distinctive fleet sizes requiring different charge times and exhibiting different ranges, suggests that the number of station locations depends almost wholly on vehicle range. Reducing charge times does lower fleet response times (to trip requests), but increasing fleet size improves response times the most. Increasing range above 175 km (109 miles) does not appear to improve response times for this region and trips originating in the urban core are served the quickest. Unoccupied travel accounted for 19.6% of SAEV mileage on average, with driving to charging stations accounting for 31.5% of this empty-vehicle mileage. This study found that there appears to be a limit on how much response time can be improved through decreasing charge times or increasing vehicle range.     

多体浮式防波堤消波特性数值模拟

多体浮式防波堤消波特性是决定其应用价值的重要因素,基于三维势流理论,通过使用Ansys Workbench软件和AQWA Graphical Supervisor(AGS)图像后处理软件,对多体浮式防波堤在不同入射角和浮筒吃水深度下的消波效果展开研究。结果表明,在入射角度为90°时,多浮筒浮式防波堤能够最大程度地消减波浪。同时,透射系数随吃水深度的增加而不断减小,但结构稳定性会下降。因此,实际工程中应尽量保证浮式防波堤的迎浪面与波浪的来波方向垂直,这样可以获得较好的消波效果,同时应尽量避免选择吃水深度过大的浮式防波堤。