钢管桩与混凝土芯粘结力及抗弯应力传递模拟试验研究

依托深圳蛇口集装箱码头二期工程,进行了钢管桩与混凝土芯粘结力及抗弯应力传递模拟试验,对试验结果进行理论分析,讨论了不同搭接长度和不同UEA掺量对钢管桩与混凝土芯单位粘结力的影响;推导出纯弯矩作用下,混凝土芯与钢管粘结段粘结长度的计算公式。为类似工程提供方法指导和理论依据。     

采用喷风冷却工艺提高淬火钢轨性能的研究

钢轨喷风淬火工艺采用单一的冷却介质压缩空气,使淬火冷却均匀性得到提高,而且不受钢轨表面状态对淬火质量的影响,便于生产管理。由于在冷却装置中加入侧面喷风冷却,淬火硬度分布更合理,有利于提高淬火钢轨抗侧磨能力。线路铺设使用也表明,喷风淬火钢轨比喷雾淬火钢轨具有更好的抗剥离性。根据目前国内淬火线生产状况,提出调整钢轨的成分和采用喷风冷却工艺是当前迫切需要解决的问题。     

功率循环测试中衬底焊接层的可靠性

基板与陶瓷衬底之间的焊层寿命通常利用IGBT模块的被动加热和冷却(热循环)来测试,但这种试验会引起焊层失效(分层)。实际应用中,IGBT和二极管芯片是主动被加热的,诸如焊线脱落等其它模式的失效也会限制使用寿命,通常可通过功率循环试验来评估这种应力的影响。本文通过功率循环试验来评估衬底焊层的失效,利用高循环周次的测试进行有效的衬底焊层热循环试验,其关键在于功率循环过程中焊层温度的预测。在温度波动不大的条件下,比较了被动热循环和主动功率循环时对焊接寿命的影响。     

城市轨道交通车辆受电弓弓头安全宽度的计算

分析了城市轨道交通车辆在直线段和曲线段中受电弓弓头的偏移影响因素以及接触线的受风偏移现象.根据比较车辆处于直线段和曲线段时的受电弓与接触线之间相对距离来确定受电弓弓头宽度的合理安全宽度,并设计了“城市轨道交通车辆受电弓宽度参数计算软件”.     

Dynamic stride length adaptation according to utility and personal space

Pedestrians adjust both speed and stride length when they navigate difficult situations such as tight corners or dense crowds. They try to avoid collisions and to preserve their personal space. State-of-the-art pedestrian motion models automatically reduce speed in dense crowds simply because there is no space where the pedestrians could go. The stride length and its correct adaptation, however, are rarely considered. This leads to artefacts that impact macroscopic observation parameters such as densities in front of bottlenecks and, through this, flow. Hence modelling stride adaptation is important to increase the predictive power of pedestrian models. To achieve this we reformulate the problem as an optimisation problem on a disk around the pedestrian. Each pedestrian seeks the position that is most attractive in a sense of balanced goals between the search for targets, the need for individual space and the need to keep a distance from obstacles. The need for space is modelled according to findings from psychology defining zones around a person that, when invaded, cause unease. The result is a fully automatic adjustment that allows calibration through meaningful social parameters and that gives visually natural results with an excellent fit to measured experimental data.     

The symmetric intersection design and traffic control optimization

It is well recognized that the left-turning movement reduces the intersection capacity significantly, because exclusive left turn phases are needed to discharge left turn vehicles only. This paper proposes the concept of Left-Hand Traffic (LHT) arterial, on where vehicles follow left-hand traffic rules as in England and India. The unconventional intersection where a LHT arterial intersects with a Right-Hand Traffic (RHT) arterial is named as symmetric intersection. It is only need three basic signal phases to separate all conflicts at symmetric intersection, while it at least need four signal phases at a conventional intersection. So, compared with the conventional intersection, the symmetric intersection can provide longer green time for the left-turning and the through movement, which can increase the capacity significantly. Through-movement waiting areas (TWAs) can be set at the symmetric intersection effectively, which can increase the capacity and short the cycle length furthermore. And the symmetric intersection is Channelized to improve the safety of TWAs. The Binary-Mixed-Integer-Linear-Programming (BMILP) model is employed to formulate the capacity maximization problem and signal cycle length minimization problem of the symmetric intersection. The BMILP model can be solved by standard branch-and-bound algorithms efficiently and outputs the lane allocation, signal timing decisions, and other decisions. Experiments analysis shows that the symmetric intersection with TWAs can increase the capacity and short the signal cycle length.     

开敞海域中液体散货泊位长度探讨

对国内若干开敞海域码头泊位长度进行分析,又对英、美、日本及石油公司国际论坛等现行港口工程规范中开敞式码头泊位长度的确定方法进行讨论。在此基础上指出:开敞海域液体散货码头的横向约束比纵向约束更为重要;在不影响船舶约束效果的前提下,采用较大水平系缆角以及适中的缆绳长度可有效缩短泊位长度;并建议对于单个独立的开敞式液体散货泊位,其泊位长度可按1.1~1.3倍设计船长确定。     

照明长度和亮度随车速变化的隧道照明智能控制系统研究

随着我国交通运输业日益发达,越来越多的公路隧道投入运营,其安全性和运营成本之间的矛盾也越来越受到关注,如何在保证隧道运营安全的前提下,尽可能的降低运营成本成为亟待解决的难题。本文从隧道照明安全节能的角度出发,提出一种根据车速改变加强照明区段长度的隧道照明控制系统,满足照明质量的同时进行隧道的"按需照明"。系统将车速信息分为50 km/h以下、50~70 km/h、70~90 km/h、90 km/h以上四个速度区段,每个速度区段设计不同的加强照明区段长度;通过电感式线圈检测进入隧道的车辆速度作为控制输入参数,控制相应区段进行照明。     

轨迹数据驱动的单点信号交叉口运行效率评价方法

为解决信号交叉口运行效率评价方法偏理论化、实用性不强等问题,以出租车、公交车、驾图(车联网)多源GPS轨迹数据为基础,充分利用车辆减速、停车、加速等连续速度变化特征及位置信息,提出交叉口个体车辆排队长度、通行时间、停车次数等交通参数提取技术.基于此,构建以信号交叉口运行指数为一级指标,车辆平均通行时间,第95％分位排队...     

Riks弧长法在压杆非线性屈曲分析中的应用

为了得到单轴压缩杆件考虑几何非线性时的后屈曲特性,介绍Riks弧长法的基本原理,并以工字钢为例,说明Riks弧长法在压杆非线性屈曲分析中的应用.结果表明,考虑初始缺陷后,压杆的屈曲强度大大减小,且屈曲强度对缺陷因子极为敏感.该研究可为单轴压缩杆件的非线性屈曲分析提供参考.