FPSO内孤立波载荷实验观测及理论预报模型研究

利用大型密度分层水槽开展了下凹型内孤立波作用在FPSO上的载荷特性系列实验;并依据实验工况,考虑KdV、eKdV和MCC内孤立波理论的适用性条件,数值研究了FPSO内孤立波载荷成分构成;基于实验结果和载荷成分构成,建立了FPSO内孤立波载荷的理论预报模型.研究表明:FPSO内孤立波水平载荷由粘性力和Froude-Krylov力组成,而垂向载荷主要为垂向Froude-Krylov力;Froude-Krylov力可通过动压力沿FPSO浮体湿表面积分得到,粘性力则通过经实验回归的摩擦系数Cf、形状修正因数K乘以内孤立波诱导水质点切向速度沿FPSO浮体湿表面积分得到.系列实验结果得出:摩擦系数Cf和形状修正因数K与雷诺数Re、KC数和流体层深度比h1/h有关;摩擦系数与Re呈自然对数关系;而形状修正因数K与KC数呈幂函数关系.理论预报模型预报的水平载荷、垂向载荷结果均与系列实验和数值结果吻合较好,并且发现随着内孤立波振幅的增加,载荷幅值近乎线性增加,而且上层流体深度对水平力幅值有明显的影响.     

用高温超导线圈和常导线圈构成的混合式电磁悬浮系统

常导电磁吸力悬浮系统悬浮气隙小、悬浮功率大,电动斥力悬浮系统不能实现静止悬浮、磁场污染大。由于受电流变化率限制,单独采用高温超导线圈构成的电磁吸力悬浮系统不能实现稳定悬浮。经分析比较,提出了一种用高温超导线圈和常导线圈构成的混合式电磁吸力型悬浮系统方案。采用这种混合式悬浮方案可增大悬浮气隙、实现稳态"零"功率悬浮、减轻车体重量、降低制冷费用、且无磁场污染。     

Some Results on Unicity of Entire Functions Related to Normal Families

IntroductionLet D be a domain in C.Define for f mero-morphic on D and a,b∈C,we putE(a,f)={z∶f(z)-a=0}where a zero of multiplicity m is counted m times inthe set.And put-E(a,f)=f-1({a})∩D={z∈D∶f(z)=a}Then f and g share a IM(ignoring multiplicities),i.e.-E(a,f)=-E(a,g)If f-a and g-a have the same zeros with thesame multiplicities,then f and g share the value aCM(counting multiplicities),i.e.E(a,f)=E(a,g)A meromorphic function f on C is called anormal function if there exists a posit…     

新型码头钢-混凝土组合面板

基于特殊需要,提出了带型钢加劲肋的钢板-混凝土组合板这一新型组合码头面板。以加劲肋形式、组合板厚度和栓钉布置为参数,进行了9块组合板的力学性能试验。试验结果表明,通过适当地选择型钢加劲肋形式、合理地布置栓钉和确定混凝土厚度,可以保证组合作用的发挥。组合板的正截面承载力可按基于修正平截面假定的极限状态计算;组合板的变形,可在按现行钢结构设计规范计算的基础上,加上考虑界面滑移影响的附加变形值予以修正。计算值与试验值吻合较好。     

Design of tyre force excitation for tyre–road friction estimation

Knowledge of the current tyre–road friction coefficient is essential for future autonomous vehicles. The environmental conditions, and the tyre–road friction in particular, determine both the braking distance and the maximum cornering velocity and thus set the boundaries for the vehicle. Tyre–road friction is difficult to estimate during normal driving due to low levels of tyre force excitation. This problem can be solved by using active tyre force excitation. A torque is added to one or several wheels in the purpose of estimating the tyre–road friction coefficient. Active tyre force excitation provides the opportunity to design the tyre force excitation freely. This study investigates how the tyre force should be applied to minimise the error of the tyre–road friction estimate. The performance of different excitation strategies was found to be dependent on both tyre model choice and noise level. Furthermore, the advantage with using tyre models with more parameters decreased when noise was added to the force and slip ratio.     

新常态下工业4.0对我国汽车产业转型升级的启示

阐述了工业4.0的内涵和目的,分析了当前我国汽车产业发展面临的重大挑战,提出了新常态下借鉴工业4.0,加快我国汽车产业转型升级的几点启示。     

北美铁路降低轮轨接触应力新进展

介绍了北美铁路在降低轮轨接触应力和轮轨作用力方面的研究成果.     

快速线路轨道刚度合理值的研究

轨道动态几何形位直接对行车安全、轮轨作用力、车辆振动产生影响.轨道动态几何形位的变化与众多因素相关.轨道刚度变化同时影响着轮轨动荷载和轨道动态几何形位的变化.将沪宁线轨检车实测动态不平顺输入动力仿真软件,分别计算不同垂向和横向刚度时的轮轨动轮载和钢轨的垂向、横向动位移,并改变车辆速度和输入不平顺的大小,分析轨道不平顺、轮轨动荷载和钢轨动位移之间的关系.利用正态分布的原则统计不同状态下动轮载和动位移的最大值,分析对比钢轨动态变形和轮轨动荷载随刚度和速度的变化趋势,提出了合理的轨道刚度取值范围,并分析了初始不平顺大小对轨道动态位移的影响.     

Artificial forces for virtual autonomous ships with encountering situations in restricted waters

ABSTRACT

Even if the same two ships operate in the same encountering situation, the actual strategies and timing of operations may be different. Therefore, the fixed collision avoidance trajectory and ship movements are no longer suitable for simulating the real ship behaviour. This paper tries to develop an artificial intelligent system that fully sensitive to the local circumstances and command a ship in virtual environment. Based on AIS (Automatic Identification System) data, this study has developed artificial forces which help decision makings on-board independently under different situations and catching the stochastic nature of ship behaviours during collision avoidances manoeuvring. Actual ship tracks are helpful for ascertaining the parameters that contribute to artificial forces in collision avoidances, while the correlation coefficient analysis is helpful to distinguish the parameters. This study will help to develop a navigation traffic simulation to reflect the realistic ship behaviour and provide reliable information for port and waterway planning, risk analysis, and mitigation measures. The method can be used in developing algorithms for autonomous ships. The method introduced in this study lays a foundation for developing artificial forces at intersections or bends, although the model is only applicable in straight channels at the moment.     

小阻力扣件桥上无缝线路附加力

在铁路桥梁上铺设无缝线路，为了降低梁跨结构和钢轨之间的相互作用力，往往采用小阻力扣件。在有碴桥上无缝线路采用小阻力扣件，在钢轨、轨枕及梁跨结构三者之间将产生较明显相对位移，以往的计算模型没有考虑轨枕和钢轨相对位移的影响，与有碴轨道小阻力扣件桥上无缝线路工况存在较大偏差。在吸收国内外研究成果的基础上，建立了一种能综合考虑钢轨、轨枕、梁体三者相互作用的有碴轨道小阻力扣件桥上无缝线路附加力计算力学模型，给出了算例，对不同力学模型计算结果作了对比。计算结果表明，新模型计算结果要小于既有模型，对于柔性墩台结构，差分尤其明显。不考虑轨枕位移，该模型也适用于无碴轨道小阻力扣件桥上无缝线路附加力计算，相比有碴桥，小阻力扣件无碴桥上无缝线路附加力有较大幅度增加。