盾构隧道壁后注浆中“定时浆”试验研究

我国盾构隧道广泛使用凝结时间较长的单液浆，但由于注入后不能及时凝结常常引发管片上浮、浆液流失等工程问题。针对这些问题提出“定时浆”的概念。通过在单液硬性浆中添加氯化铝溶液与水玻璃，基于浆液的胶结时间、流动度、28 d强度等指标研究了“定时浆”的配方。结果表明： 1）通过先加入氯化铝溶液再加入水玻璃的方法，可以实现浆液“定时”凝结； 2）在硬性浆中掺加0.50%~0.75%的氯化铝溶液、1.00%~1.25%的水玻璃，可以达到良好的定时效果； 3）通过简单的注浆设备改造可以形成“双液单注”的定时注浆工艺。     

通孔玻璃材料的研制

研究了利用废旧玻璃用松装烧结和模压烧结方法生产通孔材料的可能性，以及原始粉末尺寸、烧结工艺和造孔剂添加量对通孔材料的密度和孔隙度的影响。实验结果表明，用废旧玻璃经松装烧结或模压烧结后可制得通孔材料；松装烧结时，随烧结温度提高，烧结保温时间延长，原始粉末粒度变细，烧结后通孔材料的密度增大，而孔隙度降低；模压烧结时造孔剂的最佳百分含量为５％～５０％，且通孔材料随造孔剂的百分含量增加，密度降低，孔隙度增大。     

杭州城市交通拥挤现状及对策

在分析杭州市交通供需现状的基础上,提出了规划多中心结构和混合功能区,以减少不必要的出行以及合理配置交通源,并对改善中心区交通提出切实可行的对策。     

一种改进的基于密度和网格的高维聚类算法

提出了一种改进的基于密度和网格的高维聚类算法,并对算法有效性进行了验证.该算法通过减少样本点数量的方法达到减少稠密子空间数量.在发现高维稠密子空间时,对样本库进行精简.这些样本点的求得能有效减少求解最小聚类的时间复杂度.     

A simple formulation for predicting the ultimate strength of ships

The aim of this study is to derive a simple analytical formula for predicting the ultimate collapse strength of a single- and double-hull ship under a vertical bending moment, and also to characterize the accuracy and applicability for earlier approximate formulations. It is known that a ship hull will reach the overall collapse state if both collapse of the compression flange and yielding of the tension flange occur. Side shells in the vicinity of the compression and the tension flanges will often fail also, but the material around the final neutral axis will remain in the elastic state. Based on this observation, a credible distribution of longitudinal stresses around the hull section at the overall collapse state is assumed, and an explicit analytical equation for calculating the hull ultimate strength is obtained. A comparison between the derived formula and existing expressions is made for largescale box girder models, a one-third-scale frigate hull model, and full-scale ship hulls.List of symbols A _B total sectional area of outer bottom - A _B total sectional area of inner bottom - A _D total sectional area of deck - A _S half-sectional area of all sides (including longitudinal bulkheads and inner sides) - a _s sectional area of a longitudinal stiffener with effective plating - b breadth of plate between longitudinal stiffeners - D hull depth - D _B height of double bottom - E Young's modulus - g neutral axis position above the base line in the sagging condition or below the deck in the hogging condition - H depth of hull section in linear elastic state - I _s moment of inertia of a longitudinal stiffener with effective plating - l length of a longitudinal stiffener between transverse beams - M _E elastic bending moment - M _p fully plastic bending moment of hull section - M _u ultimate bending moment capacity of hull section - M _uh ,M _us ultimate bending moment in hogging or sagging conditions - r radius of gyration of a longitudinal stiffener with effective plating [=(I _s /a _s )^1/2] - t plate thickness - Z elastic section modulus at the compression flange - Z _B ,Z _D elastic section modulus at bottom or deck - slenderness ratio of plate between stiffeners [= (b/t)(_y/E)^1/2] - slenderness ratio of a longitudinal stiffener with effective plating [=(l/r)(_y/E)^1/2] - _y yield strength of the material - _yB , _yB , _yD yield strength of outer bottom, inner bottom - _yS deck, or side - _u ultimate buckling strength of the compression flange - _uB , _uB , _uD ultimate buckling strength of outer bottom - _uS inner bottom, deck, or side     

沥青混合料最大理论密度的计算

通过对矿质集料的物理状态及其在混合料中存在方式进行分析,探讨了沥青混合料最大理论密度计算中矿料密度的引用及其影响.     

深圳市“5.24”暴雨洪水灾后的反思

1998年5月24日，深圳市暴雨成灾，经济损失很大。本文总结和分析了暴雨洪水的特性及其成灾的原因，提出防洪减灾的措施和建议。     

沥青路面破损程度分级与破损换算系数取值的探讨

本文分析现行规范中对沥青路面破损程度、密度分级以及破损换算系数取值中存在问题,通过分析沥青路面破损程度与路面使用状况关系,结合沥青路面养护措施,提出沥青路面裂缝破损密度分级的方法,并对车辙破损严重程度分级标准、裂缝和车辙破损换算系数的修正值提出建议。     

The identification and empirical characterization of vehicular (Lagrangian) fundamental diagrams in multilane traffic flow

Traditional macroscopic traffic flow modeling framework adopts the spatial–temporal coordinate system to analyze traffic flow dynamics. With such modeling and analysis paradigm, complications arise for traffic flow data collected from mobile sensors such as probe vehicles equipped with mobile phones, Bluetooth, and Global Positioning System devices. The vehicle‐based measurement technologies call for new modeling thoughts that address the unique features of moving measurements and explore their full potential. In this paper, we look into the concept of vehicular fundamental diagram (VFD) and discuss its engineering implications. VFD corresponds to a conventional fundamental diagram (FD) in the kinematic wave (KW) theory that adopts space–time coordinates. Similar to the regular FD in the KW theory, VFD encapsulates all traffic flow dynamics. In this paper, to demonstrate the full potential of VFD in interpreting multilane traffic flow dynamics, we generalize the classical Edie's formula and propose a direct approach of reconstructing VFD from traffic measurements in the vehicular coordinates. A smoothing algorithm is proposed to effectively reduce the nonphysical fluctuation of traffic states calculated from multilane vehicle trajectories. As an example, we apply the proposed methodology to explore the next‐generation simulation datasets and identify the existence and forms of shock waves in different coordinate systems. Our findings provide empirical justifications and further insight for the Lagrangian traffic flow theory and models when applied in practice. Copyright © 2015 John Wiley & Sons, Ltd.