乘用车DCT车型的动力性提升分析与实施

为满足公司的发展战略要求,需要打造一款高性能、运动操控性车型,为提升该款乘用车DCT车型的动力性和操控型,分别从车辆的起步、加速过程的扭矩发挥和换挡结束的扭矩恢复、换挡过程的扭矩交替时间和转速同步时间、换挡线加速度和动力升挡换挡线及硬件五个方面进行优化。论文对该车型的起步加速过程以及换挡过程的扭矩控制进行详细分析,并将五个优化方向分解为13个子项,分别对各子项优化效果进行分析,通过INCA软件对车辆的控制系统进行优化,经过实际道路测试满足了目标开发要求。     

先期振动对高聚物胶凝堆石料动变形特性的影响

先期振动对土石坝地震变形影响显著。通过开展不同先期动应力作用下的动三轴试验,研究了先期振动对未加固堆石料和高聚物胶凝堆石料动变形特性的影响。结果表明:先期振动对未加固堆石料和高聚物胶凝堆石料的弹性轴应变无明显影响,但显著降低了其塑性轴应变;未加固堆石料和高聚物胶凝堆石料的残余变形在先期振动影响下显著减小,与未经受先期振动的试样相比,先期动应力为40%围压的试样,最大残余剪应变降低幅度和最大残余体应变降低幅度的平均值分别为48.1%和42.0%;先期动应力为80%围压的试样,最大残余剪应变降低幅度和最大残余体应变降低幅度的平均值分别为80.9%和71.6%。先期动应力幅值越大,再次经历动应力时未加固堆石料和高聚物胶凝堆石料产生的残余变形越小,抵抗变形能力提高越明显。最大残余变形的降低幅度与固结比、围压及高聚物含量无关。随后修正了沈珠江动残余变形模型,修正后的残余变形模型可以反映高聚物对堆石料残余剪应变和残余体应变的影响。与未经受先期振动的试样相比,先期动应力为40%围压的高聚物胶凝堆石料(高聚物质量比R_p=2%)的改进残余变形模型参数c₁和c₄分别降低了27.7%和61.2%;先期动应力为80%围压的高聚物胶凝堆石料(R_p=2%)的改进残余变形模型参数c₁和c₄分别降低了68.8%和79.3%。     

A coupled numerical approach to simulate the effect of earthquake frequency content on seismic behavior of submarine tunnel

Roughly 90% of all natural vibrations have epicenters in offshore zones and may cause destruction of submarine and floating structures. Such excitations can influence the safe performance of facilities set up on the seabed, like tunnels, jacket legs and subsea oil pipelines. Some researches on this theme have been carried out to demonstrate the importance of seaquake analyses and their effects have been underlined. The present study intends to numerically simulate a two-dimensional fluid-structure interaction (FSI) problem in order to examine the dynamic response of submarine tunnel under real horizontal earthquakes. Pressure is considered as independent nodal variables to represent the fluid flow effects and the induced time-dependent acceleration in porous medium equation is incorporated in the analysis and the tunnel shell is considered as flexible. This work highlights the importance of the input ground motion frequency content that governs the development of the induced seismic stress/strain around the lining of the tunnel. The results demonstrate that for deep sea the increment rate of the circumferential stress caused by surface gravity waves is below 7% when compared to the no-wave interface condition. Moreover, it is confirmed that long-period record may amplify the overall response of the system (up to 60%) specially the lateral and vertical displacements, as well as the principal stress to a lesser extent. The developed numerical model can attend to further analysis of tunnels embedded in a half-space in conjunction with fluid undergoing the severe long-period earthquakes.     

感应充电路面技术研究现状与展望

以感应充电技术(Inductive Power Transfer,IPT)为主要特征的充电路面(Electrified Road,e-Road)近年来发展迅速，其可为行进中的电动汽车进行动态无线充电，有效解决电动汽车充电时间过长、续航里程不足等问题，是支撑未来公路交通电气化发展的重要储备技术。详细介绍了IPT系统的工作原理和性能特点，并总结了已有e-Road试验段的充电性能参数和技术就绪度水平。在此基础上，进一步从基础设施角度剖析了e-Road目前存在的主要工程问题及相关研究进展，内容包括：①深入分析了IPT系统工作时因高频磁场通过介电性路面材料所引起的电磁损耗对IPT系统充电效率的影响，并提出了可能的解决方法；②针对充电模块与普通沥青路面存在的力学兼容性问题，从结构受力原理、材料损伤特性等方面总结了e-Road复合结构产生力学损伤加剧效应的原因，并提出了耐久性优化措施；③针对e-Road环境可持续方面存在的不确定性，评估并对比了e-Road与传统道路的全生命周期环境效益，指出了e-Road环境性能研究对电动汽车全生命周期综合效益估算的重要性。此外，还从政策支持、安全性、价格因素等角度对e-Road进行了综合可行性评估，并对充电路面基础设施的未来发展进行了智能化展望，提出了e-Road与其他新型智能道路技术进行有机融合的可能途径。     

基于聚类站点客流公共特征的轨道交通车站精细分类

已有城市轨道交通车站分类多基于定性分析，不能满足精细化设计和运营的需要。本文提出一种基于聚类站点公共特征的站点精细分类方法。首先，将来源于AFC(Automatic Fare Collection)的进站客流量数据处理为时间序列数据，并基于K-Means++算法对各个站点的客流量进行聚类；其次，建立客流量聚类结果与土地利用特征多维参数的拟合方程，计算获得居住密集型、工作就业型以及区域中心型等5种大类站点的客流量公共特征。在此基础上，充分考虑属于同一大类站点不同站点的细分特性，使用5类客流量公共特征比重组合精细描述具体站点类型。 实例结果表明，使用本文提出的精细分类方法计算得到的每个站的客流量拟合值与真实客流值间的平均绝对百分比误差控制在14%以内，说明该分类方法具有可行性。     

Integrated models of land use and transportation for the autonomous vehicle revolution

ABSTRACT

The advent of the autonomous vehicle (AV) will affect not only the transportation system, but also future patterns of land development. Integrated land use and transportation models will be critical tools in assessing the path forward with this technology. Key questions with respect to land use impacts of AVs arise from potential changes in sensitivity to travel and reduced demand for parking. It is an open question whether AVs will induce urban sprawl, or whether spatial economies of agglomeration will mitigate any reductions in travel time sensitivity. The deployment of shared fleets of AVs would likely reduce parking demand, producing yet to be explored impacts on property development within existing urban footprints. We perform a critical assessment of currently operational models and their ability to represent the adoption of AVs. We identify the representation of time in such models as a vital component requiring additional development to model this new technology. Existing model applications have focused on the discrete addition of new infrastructure or policy at a fixed point in time, whereas AV adoption will occur incrementally through time. Stated adaptation surveys are recommended as tools to quantify preferences and develop relevant model inputs. It is argued that existing models that assume comparatively static equilibrium have been convenient in the past, but are insufficient to model technology adoption. In contrast, dynamic model frameworks lack sufficient structure to maintain reasonability under large perturbations from base conditions. The ongoing advancement of computing has allowed models to move away from being mechanistic aggregate tools, towards behaviourally rich depictions of individual persons and firms. However, much work remains to move from projections of existing conditions into the future, to the evolution of the spatial economy as it evolves through time in response to new technologies and exogenous stresses. Principles from complex and evolutionary systems theory will be important in the development of models with the capacity to consider such dynamics.     

基于STAR-CCM+的螺旋桨水动力性能分析

文章运用公式将P4119螺旋桨二维坐标型值转换成三维坐标型值,导入Gambit2. 4软件建立几何模型。基于STAR-CCM+软件对该桨进行网格划分,设置边界条件和数值,仿真模拟不同进速系数下的转矩系数、推力系数、敞水效率和桨叶表面压力分布。经与试验值比较,误差均在10%以内,验证了计算结果的准确性,能够满足工程需要。     

包头地区筑路材料的分布与选择

针对内蒙古包头地区筑路材料的分布特征，结合工程实践进行归纳分析，并提出相应的见解，可供设计时参考。     

旧水泥混凝土路面加铺沥青混凝土面层勘测设计

旧水泥混凝土路面加铺沥青混凝土面层，当没有路线设计资料时，需对旧有路线进行拟合，重新进行勘测设计，以获得与旧有路线一致的路线设计资料，为旧水泥混凝土路面加铺沥青混凝土面层提供设计依据。结合工程实践，介绍了拟合旧有路线时勘测设计的内容和方法。     

旧路改建工程设计

结合莞惠公路改建工程的设计经验,介绍改建公路设计时技术标准的应用,道路中线及路面结构的选择,阐述了如何进行加固和接长桥涵验算设计。