Economic and ecological optimization of electric bus charging considering variable electricity prices and CO2eq intensities

In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses.In this study, we present a new methodology for optimizing the vehicles’ charging time as a function of the parameters CO_2eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO_2eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle.In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6% compared to charging at a fixed electricity price. The savings potential of CO_2eq emissions is similar, at 14.9%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO_2eq intensity is also low in this period, but midday charging leads to the largest savings in CO_2eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5% CO_2eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.     

基于车辆自动定位数据的有轨电车运行效率分析与应用

结合有轨电车线路的现有车辆自动定位数据,分析有轨电车运行效率及其相关影响因素。其中,影响因素从站台、路段、交叉口3个方面进行考虑。定性分析了不同站台型式、站台位置、交叉口类型的属性特征,并量化不同路段的路段长度、所包含的交叉口个数,同时考虑了交叉口控制策略对有轨电车运行时间的影响。以某已运营的有轨电车线路为例,通过建立多元线性回归模型,从不同层面探究不同因素对已运营有轨电车线路运行效率的影响。最后用模型对有轨电车新建线路的运行效率进行预测,并提出建议。     

摩擦焊接工艺在全浮式汽车半轴制造中的应用

介绍了国内汽车半轴生产所采用的三种型式——锻造式半轴、分体式半轴及摩擦焊接式半轴。对摩擦焊接式半轴的生产工艺、摩擦焊接结合机理、生产设备及应用特点等作了介绍，为我国中小型汽车企业在工艺水平方面提供借鉴。     

汔车运行材料在现代电控汽油轿车上的使用分析

汽车使用的燃料、润滑剂、特种液和橡胶轮胎等统称为汽车运行材料。分析汽车运行材料在现代电控汽油轿车上的使用情况，给出相应的使用原则及注意事项，可为维修人员和驾驶员等提供参考。     

车体材质对城轨车辆运行阻力的影响

介绍了铝合金、不锈钢和耐候钢等三种车体材质对车体质量及城轨车辆运行阻力的影响。     

编组站驼峰车辆溜放速度控制系统的研究

以计算机和红外线传感器为主，研制了编组站驼峰车组溜放速度控制系统，系统通过检测车辆溜放的速度，计算出所需制动力的大小，通过缓器对车辆溜放进行速度控制，并具有对解体车辆自动计数，各种故障报警等功能。     

使用构件和零件的实际疲劳特性进行车辆疲劳寿命预测

疲劳寿命计算是机械设计的重要步骤,而利用标称应力和可比构件或零件的实际疲劳特性这一疲劳分析方法是疲劳寿命计算的有效方法。本文详细地阐述其计算原理和具体步骤,并将此疲劳分析方法应用于货车车辆实际的疲劳计算中,验证了该方法具有很好的应用价值。     

Impacts of motor vehicle operation on water quality in the US – Cleanup costs and policies

This paper investigates the costs of controlling some of the environmental impacts of motor vehicle transportation on groundwater and on surface waters. We estimate that annualized costs of cleaning-up leaking underground storage tanks range from $0.8 billion to $2.1 billion per year over 10 years. Annualized costs of controlling highway runoff from principal arterials in the US are much larger: they range from $2.9 billion to $15.6 billion per year over 20 years (1.6–8.3% of annualized highway transportation expenditures). Some causes of non-point source pollution were unintentionally created by regulations or could be addressed by simple design changes of motor vehicles. A review of applicable measures suggests that effective policies should combine economic incentives, information campaigns, and enforcement, coupled with preventive environmental measures. In general, preventing water pollution from motor vehicles would be much cheaper than cleaning it up.     

基于多点电喷LPG发动机的非空调车置换改造

介绍了使用长春一汽CA6GH-L多点电喷LPG单燃料发动机，对10m非空调车进行改装后出现的故障情况分析了故障原因，提出了相应的系统解决方案，简述了取得的预期效果和改装成果。     

ROV—遥控潜水器数据传输系统

本文介绍了系缆遥控潜水器（ROV）数据传输系统的信息容量、速率和水中运动载体的时间响应；分析了半双工传输系统与时钟节拍；交替使用8位、12位模拟量数字转换，保证了ROV运动控制精度．在实行水面、水下信息通信的数据传输系统中，由于用绞线对替代了诸多导线，缩小了脐带电缆直径，减少了脐带电缆水中运动时受到的阻力，因而提高了系缆遥控潜水器操纵机动性和下潜深度．