ROV attitude control based on multi-motor cooperative propulsion北大核心CSCD

[目的]为了提高遥控水下航行器(ROV)在复杂水下环境中的姿态控制性能,开展多电机协同推进的ROV姿态控制研究。[方法]首先,针对多电机系统的结构和算法,分别提出一种基于PID速度补偿器的偏差耦合结构和一种新型非奇异终端滑模控制(SMC)算法,并设计一种新颖的基于多电机协同推进的ROV姿态控制方法;然后,建立ROV的运动学和动力学模型,开展推进器组推力建模分析、解耦简化ROV动力学模型研究;最后,设计一种ROV滑模姿态控制器。[结果]仿真结果表明,所提的结构和算法可提高多电机系统的抗干扰性、同步性和快速响应能力,进而提高ROV姿态控制系统的稳定性与鲁棒性。[结论]所提方法可为ROV姿态控制提供一种新的可用方案。     

Economic and ecological optimization of electric bus charging considering variable electricity prices and CO2eq intensities

In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses.In this study, we present a new methodology for optimizing the vehicles’ charging time as a function of the parameters CO_2eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO_2eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle.In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6% compared to charging at a fixed electricity price. The savings potential of CO_2eq emissions is similar, at 14.9%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO_2eq intensity is also low in this period, but midday charging leads to the largest savings in CO_2eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5% CO_2eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.     

面向新型混合交通流的智能交叉口网络布局优化

考虑网联自动驾驶车辆(Connected Autonomous Vehicle, CAV)应用先进的车联网与自动驾驶技术，可以采用智能交叉口的组织形式，大幅提升交叉口的通行效率，为降低CAV与人工驾驶车辆(Human-driven Vehicle, HV)混行条件下城市交通系统的整体出行成本，提出智能交叉口在城 市交通网络中的布局优化问题，建立数学优化模型并求解。首先，基于对两类车辆行驶特性的分析，建立混合用户均衡模型，描述CAV与HV的路径选择行为；其次，从交通规划者的角度，以系统最优为目标，整合混合用户均衡模型，建立面向新型混合交通流的智能交叉口网络布局优化模型，并利用改进的遗传算法求解；最后，选取Sioux-Falls交通网络作为案例分析，验证模型与算法的有效性，并研究CAV渗透率变化对优化结果的影响。研究表明，智能交叉口在城市路网中的合理规划极大地提高了新型混行场景下城市交通系统的出行效率，同时，大幅降低了由于网联自动 驾驶单方面技术优势带来的CAV与HV的出行效率差距，增进了出行公平性。     

基于聚类站点客流公共特征的轨道交通车站精细分类

已有城市轨道交通车站分类多基于定性分析，不能满足精细化设计和运营的需要。本文提出一种基于聚类站点公共特征的站点精细分类方法。首先，将来源于AFC(Automatic Fare Collection)的进站客流量数据处理为时间序列数据，并基于K-Means++算法对各个站点的客流量进行聚类；其次，建立客流量聚类结果与土地利用特征多维参数的拟合方程，计算获得居住密集型、工作就业型以及区域中心型等5种大类站点的客流量公共特征。在此基础上，充分考虑属于同一大类站点不同站点的细分特性，使用5类客流量公共特征比重组合精细描述具体站点类型。 实例结果表明，使用本文提出的精细分类方法计算得到的每个站的客流量拟合值与真实客流值间的平均绝对百分比误差控制在14%以内，说明该分类方法具有可行性。     

基于车辆自动定位数据的有轨电车运行效率分析与应用

结合有轨电车线路的现有车辆自动定位数据,分析有轨电车运行效率及其相关影响因素。其中,影响因素从站台、路段、交叉口3个方面进行考虑。定性分析了不同站台型式、站台位置、交叉口类型的属性特征,并量化不同路段的路段长度、所包含的交叉口个数,同时考虑了交叉口控制策略对有轨电车运行时间的影响。以某已运营的有轨电车线路为例,通过建立多元线性回归模型,从不同层面探究不同因素对已运营有轨电车线路运行效率的影响。最后用模型对有轨电车新建线路的运行效率进行预测,并提出建议。     

S^2 BHCA Multiple AUVs cooperation oriented control architecture

Oceanographic survey, or other similar applications should be the applications of multiple AUVs. In this paper, the skill ＆ simulation based hybrid control architecture （S^2BHCA） as the controller＇s design reference was proposed. It is a multi-robot cooperation oriented intelligent control architecture based on hybrid ideas. The S^2BHCA attempts to incorporate the virtues of the reactive controller and of the deliberative controller by introducing the concept of the ＂skill＂. The additional online task simulation ability for cooperation is supported, too. As an application, a multiple AUV control system was developed with three ＂skills＂ for the MCM mission including two different cooperative tasks. The simulation and the sea trials show that simple task expression, fast reaction and better cooperation support can be achieved by realizing the AUV controller based on the S^2BHCA.     

列车通信网络研究现状及展望

介绍了列车通信网络的主要任务和列车通信网络的拓扑结构,阐述了列车通信网络(TCN)的发展历程及目前国内外列车通信网络的发展现状,并展望了列车通信网络技术的发展趋势。     

利用残余力概念进行结构损伤识别

提出一种利用残余力进行结构损伤识别方法。用刚度损伤系数将有限元模型参数化来描述结构的损伤。用特征值和特征向量预测算法构造目标函数,利用两点交叉算子的二进制代码的遗传算法反复迭代优化刚度损伤系数,获得待测结构的损伤系数、损伤位置与损伤程度的信息。通过一个平面桁架对该方法进行验证,结果表明:利用残余力概念进行损伤识别所得结构的损伤系数与理论值很接近。该方法能够较准确地判断结构的损伤位置和损伤程度。     

填石路堤施工中压实质量的检测

寻找科学、合理的质量控制方法以确保填石路堤的施工质量，是一个值得深入研究的问题。     

摩擦焊接工艺在全浮式汽车半轴制造中的应用

介绍了国内汽车半轴生产所采用的三种型式——锻造式半轴、分体式半轴及摩擦焊接式半轴。对摩擦焊接式半轴的生产工艺、摩擦焊接结合机理、生产设备及应用特点等作了介绍，为我国中小型汽车企业在工艺水平方面提供借鉴。