微机控制的船用发电机继电保护实验装置

由于微机控制的继电保护与常规保护比较起来有许多优点,因此微机控制的船用发电机继电保护实验装置有其取代原有实验装置的必要性。本文就微机控制的船用发电机继电保护实验装置的硬件结构、软件算法和软件抗干扰技术进行了探讨。     

基于B/S结构的机车售后服务管理系统

文章简述了ActiveX组件模型结合ASP技术在Internet环境下实现基于Browser/Server结构的机车售后服务管理系统。该系统在ActiveX技术基础上通过ADO编程实现数据传输和访问,结合ASP和ActiveX控件技术实现动态发布和在线管理。     

Patterns in diversity and community structure of epipelagic copepods from the Brazil–Malvinas Confluence area, south-western Atlantic

Diversity and structure of epipelagic copepod communities were investigated using 70 zooplankton samples collected from the top 50 m of the Brazil–Malvinas Confluence area between 35° and 55°S. Biogeographic patterns were investigated using multivariate analysis. Biodiversity patterns were examined using different univariate indexes. Representatives of 35 species of copepods from 23 genera and 13 families were found. Two zones were delimited based on their copepod composition, one in the subtropical waters of the Brazil current, and the other in the subantarctic waters of the Malvinas current. Both environments displayed contrasting patterns of biodiversity depending upon which element is measured (regional species richness as well as mean point species richness were significantly higher in the subtropical group of stations, whereas taxonomic distinctness was significantly higher in the subantarctic community). Based on these contrasting results, we suggest the use of both kind of indexes when defining priority areas for conservation.     

Experimental ivnestigation on flow fields of viscous fluid around two-dimensional wings and comparison with computational results

To examine the flow field of a viscous fluid around the trailing edge of a wing with respect to the Kutta condition or the Joukowski hypothesis, an experimental investigation into the velocity fields around two-dimensional (2D) wings NACA0012 and NACA4412 was carried out using an X-type hot-wire anemometer in a wind tunnel and the method of colored milk injection in a circulating water channel. The results of these investigations revealed that the flow of a viscous fluid at the trailing edge of a 2D wing is tangential to the face on the pressure side, and that the flow is very slow or reversed on the suction side due to separation when the angle of attack is greater than 7.5°. By flow visualization, a Kármán vortex street was found in the wake of both wings (NACA0012 and NACA4412) when the angle of attack was 5°. These results show that the ordinary Kutta condition with respect to the direction of outflow at the trailing edge is not necessarily satisfied in a viscous fluid, but the Kutta condition with respect to the pressure at the trailing edge is satisfied as usual. Numerical results, which have been obtained as the solution of Reynolds-averaged Navier-Stokes equations, show good agreement with above-mentioned experimental results. Therefore, CFD (Computational Fluid Dynamics) simulation has proved to be very effective for studying steady viscous flow around the trailing edge of a 2D wing.     

轻型货车转向架试验简介

介绍了为美国315K货车开发的轻型转向架在FAST试验线的试验结果.     

超高速实验车驱动方案设计及优化

研究速度在400-1000km／h的超高速实验车重接式电磁驱动方案,讨论重接式电磁驱动的电路结构和运动方程。在Maxwell3D瞬态场中搭建了驱动系统仿真模型,分析不同初始速度下,三级驱动系统受力特性和加速规律。针对系统运动特性和效率问题,提出驱动电路优化方案,使得发射体运动特性改善、效率提高。仿真结果表明：通过合理分配驱动单元,应用重接式电磁驱动的超高速实验车,可在短时间内被加速达到超高速的目标。     

Inventor参数化变压器三维结构设计

从铁道牵引变压器标准化的结构基本参数入手,利用Inventor软件采用Top-down设计思路,通过变压器基本参数建立结构骨架,然后与上级模块配合细化结构参数,完成初步结构设计,对结构优化完善,建立自适应模块,充实通用件库,最终完成总装配,生成与3D图参数关联的传统2D图纸,完成牵引变压器的设计。     

城市轨道交通协同工作平台的设计与实现

为了有效解决城市轨道交通项目中各单位各专业之间的信息共享和交互,提高协同工作效率。从城市轨道交通项目的管理流程入手,分析业务特点和项目信息的分类方式、利用数据库设计思想和软件开发技术,完成协同工作平台的设计,并根据应用后的反馈信息不断优化,完善信息管理体系和权限分配机制。系统在多个项目中得到应用,有效提高信息共享和协同工作效率。详细阐述城市轨道交通协同工作平台的设计与实现的流程、思路和方法。     

基于三维坐标测量轨道几何形位的计算模型

为改进基于CPⅢ轨道控制网测量技术的地铁无砟轨道几何形位精调的测量精度与效率,提出一种基于三维坐标测量轨道几何形位的方法。通过对轨道几何形位检测点进行三维坐标测量,以轨道控制网CPⅢ点作为测量基准点,采用轨道几何形位与检测点的三维解析几何关系,建立三维坐标测量轨道几何形位的计算模型。现场无砟轨道试验段的测试结果表明,三维坐标测量可有效对轨道几何形位进行测量,测量精度满足规范要求的无砟轨道几何形位测量精度指标。     

基于D2D技术的车车通信研究

阐述车车之间实现直接通信的应用价值和意义。利用列车在RBC中的注册数据(车次号)及同方向列车在区间内相对固定的运行顺序,在RBC端加入列车通信管理单元协助列车完成身份识别,并对特殊情况下的列车通信管理单元的布置原则进行分析。探讨利用D2D技术实现车车之间的信息互通,在结合C3线路列车的运行特征与D2D技术的模式特征后,选择D2D基站中继模式建立前后行列车的通信模型。在车车通信系统模型建立的基础上,对该系统的故障因素进行分析,利用马尔科夫模型对系统可靠性进行验证,结果显示其可靠性满足目前铁路运输的需求。