Managing transportation during highway reconstruction: A recommended process

Major highway reconstruction can cause significant disruptions to existing travel patterns and economic activity. Reducing these impacts on travelers, shippers, businesses and residents requires that innovative and effective transportation management actions be developed and implemented. This paper reports the major findings and recommendations of a research study on managing transportation during highway, reconstruction. The primary objectives of the study were

基于黄金比例遗传算法的动车组列车节能优化研究

为研究注重最小化能耗的动车组列车运行控制,针对列车单质点模型受力分析不准确问题,提出一种对附加阻力进行处理的多质点方法,进而以多质点模型为基础进行2次优化。为解决遗传算法寻优时容易陷入局部最优的问题,提出一种基于黄金比例遗传算法的优化方法,1次优化通过该算法为列车运行寻求一组满足约束条件的目标速度集合,获得列车节能运行速度曲线。考虑过电分相对列车运行的影响,进行2次优化,将运行区间划分为操纵固定段和操纵可优化段,并通过黄金比例遗传算法搜索出一组操纵可优化段内满意的工况转换点,结合1次优化得到列车最终运行曲线。以兰考南-开封北线路CRH3型动车组为仿真实例,列车运行能耗降低了10.83%,表明所提方法是可行的。     

涡流比对双燃料发动机燃烧过程影响的数值分析

利用数值模拟的方法研究了涡流比对柴油引燃天然气发动机燃烧速率的影响。计算软件为经过修改的KIVA-Ⅲ程序。计算对象为具有深盆形燃烧室的发动机。研究表明，当涡流比从0依次增加到2．5、5时，虽然缸内平均湍流强度增加。但最高湍流区湍流强度先升后降；由于燃烧速率赖于当地的湍流强度，而不是缸内的平均湍流强度。所以燃烧速率并不是一直随涡流比增大而增大。     

CNG/柴油双燃料车用发动机排放特性研究

通过用YZA102Q柴油机改装的CNG／柴油双燃料发动机进行燃用双燃料和纯柴油两种情况下的对比试验。对CNG／柴油双燃料发动机THC、CO、NOx和烟度的排放特性，以及空燃比、引燃油量、喷油提前角对双燃料发动机排放的影响进行了研究和分析。     

双离合器式自动变速器换挡特性研究

介绍了双离合式自动变速器工作原理，建立了换挡过程的数学模型，并对升、降挡的换挡特性进行了仿真与试验分析，为DCT的开发设计提供了参考依据。     

浅谈FAS双中心建设及设备维护

重点分析了西安局集团公司由2K数调主系统组网更新改造为FAS双中心网络的建设方法,并根据日常维护经验,列举了调度台通道故障处理、FASB简易故障判断及计表倒换试验、FASA和FASB系统与MSC之间的业务故障处理等.     

Hydroelastic analysis of oblique irregular waves with a pontoon-type VLFS edged with dual inclined perforated plates

The fluid-structure interaction of oblique irregular waves with a pontoon-type very large floating structure (VLFS) edged with dual horizontal/inclined perforated plates has been investigated in the context of the direct time domain modal expansion theory. For the hydroelastic analysis, the boundary element method (BEM) based on time domain Kelvin sources is implemented to establish water wave model including the viscous effect of the perforated plates through the Darcy’s law, and the finite element method (FEM) is adopted for solving the deflections of the VLFS modeled as an equivalent Mindlin thick plate. In order to enhance the computing efficiency, the interpolation-tabulation scheme is applied to assess rapidly and accurately the free-surface Green function and its partial derivatives in finite water depth, and the boundary integral equation of a half or quarter VLFS model is further established taking advantage of symmetry of flow field and structure. Also, the numerical solutions are validated against a series of experimental tests. In the comparison, the empirical relationship between the actual porosity and porous parameter is successfully applied. Numerical solutions and model tests are executed to determine the hydroelastic response characteristics of VLFS with an attached anti-motion device. This study examines the effects of porosity, submerged depth, inclined angle and gap distance of such dual perforated anti-motion plates on the hydroelastic response to provide information regarding the optimal design. The effects of oblique wave angle on the performance of anti-motion and hydroelastic behavior of VLFS are also emphatically examined.     

新时代高职教育专业教师发展存在问题与建议

随着我国经济的快速发展,国家对新时代职业教育提出了期望.新时代职业教育对专业教师的要求更高.专业教师具备一定专业理论知识以及对应职业技能的"双师"型教师.因高职学校教师本身师资结构老化、年轻教师职业技能短缺等特性,同时因教师个人精力和知识的限制,部分教师难以满足以上的要求.课题组研究分析了高职学校专业教师发展的制约因素...     

Dual extended Kalman filter for vehicle state and parameter estimation

The article demonstrates the implementation of a model-based vehicle estimator, which can be used for combined estimation of vehicle states and parameters. The estimator is realised using the dual extended Kalman filter (DEKF) technique, which makes use of two Kalman filters running in parallel, thus 'splitting' the state and parameter estimation problems. Note that the two problems cannot be entirely separated due to their inherent interdependencies. This technique provides several advantages, such as the possibility to switch off the parameter estimator, once a sufficiently good set of estimates has been obtained. The estimator is based on a four-wheel vehicle model with four degrees of freedom, which accommodates the dominant modes only, and is designed to make use of several interchangeable tyre models. The paper demonstrates the appropriateness of the DEKF. Results to date indicate that this is an effective approach, which is considered to be of potential benefit to the automotive industry.     

液化石油气／柴油双燃料发动机放热规律分析

利用CB366燃烧分析仪测录的液化石油气（LPG）／柴油双燃料发动机和原柴油机示功图，比较了LPG／柴油双燃料发动机和原柴油机的燃烧特性及负荷对二者的影响，分析了供油提前角、掺烧比两因素对最高燃烧压力、燃烧放热率、着火开始时刻等双燃料发动机燃烧特性的影响，得出了有关双燃料发动机燃烧特性的结论。